Menuett 007565 Electric Kettle Instruction Manual

Menuett 007565 Electric Kettle

Operating instructions

(Translation of the original instructions) Important I Read the user instructions carefully before use. Save them for future reference.

SAFETY INSTRUCTIONS

• Check that the mains voltage corresponds to the rated voltage on the type plate.

• Do not allow the power cord to hang over the edge of a table or worktop, or to come into contact with hot surfaces.

• Do not put the product on or near a hot stove or in a hot oven.

• Do not use the product without water, this will damage the heater element.

• Place the product on a stable, level surface, out of the reach of children.

• Do not immerse the power cord, plug, pot or base in water or any other liquid -risk of fire, electric shock and/or personal injury.

• Keep your face, hands and other parts of your body away from the spout when the product is in use – risk of scalding from hot steam.

• Handle the kettle carefully when it contains hot water – risk of scalding.

• Allow the kettle to cool before filling with water.

• The product is not intended to be used by persons
  (children or adults) with any form of functional disorders, or by persons who do not have sufficient experience or knowledge on how to use it, unless they have received instructions concerning the use of the product from someone who is responsible for their safety.

• Keep children under super­vision to make sure they do not play with the product.

• Do not touch hot surfaces. Use the handle and buttons.

• Do not use the product for any other purpose than the one it is intended to be used for.

• Handle the product with care when there is hot water in it.

• The product is only intended for household use. Do not use the product outdoors.

• Do not use accessories other than those recommended or sold by the manufacturer. The use of other accessories can result in fire, electric shock and/or personal injury.

• Pull out the plug before cleaning and when the product is not in use. Allow the product to cool before cleaning or replacing parts.

• Switch off with the switch and pull out the plug.

• If the power cord or plug are damaged they must be re­placed by an authorised service centre to ensure safe use.

• Never use the product for anything other than the purpose it was designed for.

• The product must only be used with the supplied base.

• Do not overfill the kettle, this can cause boiling water to overflow.

• Close the lid before boiling and do not open the lid when the water is hot- risk of scalding.

• Avoid spilling on the power cord and plug.

• The product is intended for household use, or for use in staff rooms, hotel rooms or other similar places.

• Note that the product will still be hot after it is switched off.

• This product can be used by children from 8 years and upwards if they are supervised or receive instructions concerning the safe use of the product and understand the risks involved. Do not allow children under 8 to use, clean or maintain the product without supervision. Store the product and its power cord out of the reach of children.

WARNING! Handle the kettle with care and do not open the lid when it contains hot water – risk of scalding.

SYMBOLS

TECHNICAL DATA

• Rated voltage 230 V ~ 50 Hz
• Output 1200W
• Volume 1L
• Cord length 80cm

DESCRIPTION

1. Lid
2. Handle
3. Ca Power switch
4. Ca Level indicator
5. Baseplate
6. Ca Casing
7. Spout

BEFORE USE

Before using for the first time, or if the kettle has not been used for a long time, fill the kettle to the MAX marking and boil. Pour out the water. Wipe the kettle with a damp cloth.

NOTE: The kettle holds 1.0 I.

HOW TO USE

1. Place the kettle on a level, stable surface.
2. Lift the kettle off the base, press the lock button to open the lid, fill with the required amount of water and close the lid. The kettle can also be filled through the spout. Fill to at least the MIN marking, but do not fill above the MAX marking on the level indicator. If there is too little water in the kettle it will switch off before the water boils.
3. Put the kettle on the base.
4. Plug in the plug. Press the power switch. The status light goes on and the water starts to be boiled. When the water has boiled the kettle switches off automatically and the power switch moves to the OFF position. The kettle can be switched off at any time by pressing up the power switch. Press down the power switch to resume boiling.
5. Lift the kettle off the base and pour out the water.
6. The kettle remains switched off until started again using the power switch. The kettle can be kept on the base when not in use.

NOTE:

• Do not overfill – risk of splashing. Never fill the kettle over the MAX marking. Check that the lid is closed before plugging in the plug.
• Check that the power switch can move freely and that the lid is properly closed. The kettle will not switch off if the power switch is blocked or the lid is open.
• Handle the kettle carefully and do not open the lid when it contains hot water – risk of scalding.
•  Pull out the plug when the kettle is not in use.
• Do not immerse the kettle, power cord, plug or the base in water or any other liquid.

BOIL-DRY PROTECTION

The boil-dry protection prevents the kettle from starting when there is no water in the jug. If the boil-dry protection trips, allow the kettle to cool, fill up with cold water and switch on again.

MAINTENANCE

CLEANING Pull out the plug and allow the kettle to cool before cleaning.

• Wipe the base with a soft, damp cloth. Never use toxic detergent.
• Clean the filter regularly. The filter can be removed for easy cleaning. Replace the filter after cleaning.

IMPORTANT: Do not use abrasive detergents or implements on the jug or kettle, this can scratch the surface.

DESCALING

Descale the kettle regularly for best functionality. Follow the instructions of the manufacturer if using a special descaling agent. The kettle can also be descaled with a mixture of equal parts of water and vinegar as follows.

• Pour enough of the vinegar mixture in the kettle to cover the heating element. Leave the liquid in the kettle overnight.
• Pour out the vinegar mixture, fill the kettle to the MAX mark with clean water, boil up, and pour out the water. Repeat several times, until the smell of vinegar disappears. Any stains in the spout can be removed with a damp cloth.

STORAGE

The power cord can be wound around the bottom part of the kettle.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>