ONFORU ON-YX11-WW-HS-2 Warm White Wireless Speaker Instruction Manual

ONFORU ON-YX11-WW-HS-2 Warm White Wireless Speaker

SAFETY INFORMATION

Please read the instruction carefully before use and use it according to the instruction. After reading, please keep it properly for future reference.

1. Please use 5V adapter for charging.
2. Do not hit the product seriously to avoid damaging the product.
3. The product has a built-in lithium battery, please keep it away from direct light or heating appliances.
4. Please do not disassemble, repair or modify the product by yourself.
5. Do not get close to magnetic fields or electric fields.

PACKAGE CONTENTS

• Speaker * 2
• User Manual * 1
• USB Cable * 1
• AUX Cable * 1

PARAMETER

PRODUCT DESCRIPTION

1. TWS pairing button: Long press for 2 seconds to enter TWS pairing state, long press for 2 seconds again to cancel TWS pairing state. After TWS is paired, it will be memorized and automatically paired next time when it is switched on. Quickly double-click to enter the Bluetooth mandatory pairing state.
2. Light modes switch button: Short press can realize the switch of the three modes of long light, rhythm and off; the power-on default is warm white and constant light, short press is the rhythm mode.
3. Volume Down / Previous Song: Long press ” – ” to reduce volume; Short press ” – ” to switch back to the previous song.
4. Volume UP / Next Song: Long press ” + ” to increase volume. Short press ” + ” to move to the next song.
5. Power on/off/play/pause button: Long press for 2 seconds to turn on the device and they will automatically enter the Bluetooth pairing state; long press for 2 seconds again to power off. Short press for play and pause.
6. Indicator light: The blue light flashes quickly during Bluetooth pairing, and it stays on after pairing is successful. When playing music the blue light will flash slowly, and it stays on when the AUX IN state is on. The red light will stay on when charging, and goes off when it is fully charged.
7. Audio jack
8. USB jack
9. LED warm white light

TWS PAIRING

TWS interconnection : Switch on the two speakers at the same time, the two speakers will be paired and connected with each other. After successful pairing, the blue light of the main engine will flash slowly, and the blue light of the secondary engine will always light (with the prompt tone).
Disconnect the TWS connection: After the two speakers are successfully connected, continue to press and hold the button on any one of the speakers for 2 seconds to disconnect (with the prompt tone).
Note: The best distance between the two speakers should be controlled between 5-8M. If the range is too large or too small, the information transmission between the speakers will be affected.

BLUETOOTH MODES

1. Hold the power switch button as shown to turn the speaker on. The speaker will automatically enter Bluetooth mode by default. You will hear the prompt tone and the blue indicator light will flash quickly.
2. The first time that you pair the speakers and your device, you should turn your device’s Bluetooth function on and search for the speaker. The device will display the speaker’s name “A SPEAKER06”. Tap the speaker’s name and it will automatically pair with your device. After successfully pairing, the speaker will beep and the indicator light will stay blue.
3. When the speaker and your device has been successfully paired, you can play music through your device and control the music through the speaker.
   If you want to connect different device with this speaker, short press the power switch button as shown 2 times to cut the present bluetooth connection. And then follow the above 2 steps to enter bluetooth pairing mode.

MICRO USB CHARGING PORT

• Please charge the speakers with the supplied micro USB charging cable and use the DC power adapter that is less than 5V.
• When the speaker’s battery is low, you will see the red indicator light is flashing and the speaker will automatically shut down. Use the supplied USB cable to charge it.While the speaker is charging, you will see a red indicator light. Once the speaker is fully charged, the indicator light will turn blue.

AUX INPUT MODE

If your device is not bluetooth-enabled, easily connect with TV or other devices via this 3.5 mm audio cable.

NOTE

1. 1. When you turn on the speaker, it will automatically search for the device connected recently. If the bluetooth of the device is activated, the speaker will automatically connect and pair. After successfully pairing, you will hear a beep sound.
2. Bluetooth has an effective communication range of 15 meters. Make sure there are no large obstructions within this range. To ensure a stabe connection, it’s best to use the speaker within 5 meters of your device.
3. The speaker will automatically turn off in 30 minutes if there is no bluetooth connection or no music played

SOLUTIONS TO COMMON PROBLEMS

status, or restartit.

2. There are too many peripheral Bluetooth devices, making searching difficult, you should turn off other Bluetooth devices.

The sound is low or distorted

| 1. Check the volume of the Bluetooth device and adjust its volume to a suitable position.

2. Please charge the speaker if the battery voltage is low.

The sound is not continuous

| Check whether the distance between the speaker and the Bluetooth device exceeds the effective audio connection distance, or there is an obstacle between them.

Bluetooth status indicator does not light

| 1. The battery is low, please try again after the speaker is fully charged.

2. There are too many peripheral Bluetooth devices, making searching difficult, you should turn off other Bluetooth devices.

3. Check if the product is in search status, or restart it.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

WARM TIPS
In order to prolong the lifespan of the speaker and protect your physical and mental health, please do not listen to music in a long-term and loud environment, so as not to damage your hearing.

Manufacturer
Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si
Address: qian wan yi lu 1 hao A dong 201 shi qian hai shen gang he zuo qu Shen Zhen, Guang
Dong, 518000, CN
support@onforuled.com www.onforuleds.com

References

• Onforu LED Light - Colorful LED Lights Make Your Life More Colorful

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>