PROZIS STERI+ UV Toothbrush Sterilizer User Manual
- June 6, 2024
- PROZIS
Table of Contents
PROZIS STERI+ UV Toothbrush Sterilizer
Prozis is a registered trademark of PROZIS.COM, S.A.
Prozis reserves the right to adjust or modify the product or any of the
associated documentation in order to ensure its suitability for use, at any
time and without prior notice.
NOTE: The most recent version of this product’s user manual can be found
at www.prozis.com/user-manuals
Legal compliance statement
By means of this document, PROZIS declares that the Prozis Steri+ – UV
Toothbrush Sterilizer – is fully compliant with all the standards specified in
the applicable legislation as well as other relevant clauses.
Prozis will always be available for any additional explanation through our
customer support communication channels, available at
www.prozis.com/support
To avoid any impact on the environment or human health due to dangerous substances present in electrical and electronic devices, the end users of such devices are expected to understand the meaning of the symbol consisting of a crossed-out waste container. Do not dispose of electrical and electronic equipment along with unsorted household waste. Dispose of it separately and properly instead.
The packaging that protects the device against transport damage is made from non-polluting materials that can be disposed of via local recycle bins.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Safety warnings
DANGER! This symbol, when combined with the note Danger, means high risk. Failure to observe this warning may lead to injury to life and limb.
DANGER FOR CHILDREN AND PEOPLE WITH DISABILITIES
- Packing materials are not toys. Children must not play with the packaging materials. There is a suffocation risk.
- This product may be used by children 8 years and up as well as persons with physical, sensory or mental impairments or lacking experience and knowledge, when supervised or instructed in the safe use of the product and understanding the associated risks.
- Children must not play with the device.
- Cleaning and maintenance must not be performed by children without supervision.
- Keep the device out of the reach of children.
- The UV lights cannot be replaced! This product does not contain any replaceable compo-nents. Do not attempt to access or modify internal components.
CAUTION! This symbol highlights dangerous situations that can lead to
minor to moderate injuries, damage, malfunction, and/or destruction of the
device.
To prevent harm or damage from happening to users or others, make sure to
comply with the following requirements.
CAUTION! DAMAGE TO PROPERTY
- Check the product before every use!
- Discontinue its use if any damage to the product or the charging cable is detected!
- Keep the product away from moisture, and dripping or splashing water!
- Do not place burning candles or other open fire sources on or near the product.
- If you notice any smoke or an unusual noise or odor, disconnect the USB connection immediately.
- Sudden temperature changes may cause condensation inside the product. Allow the prod-uct to adjust for a while before using it again so as to prevent short circuits!
- Do not operate the product near heat sources, such as radiators or other heat-emitting devices.
- Do not throw the product into fire and do not expose it to high temperatures.
- Never open the product. It has no internal parts requiring maintenance.
PACKAGE CONTENTS
- 1 × Steri+ UV toothbrush sterilizer
- 1 × USB charging cable
- 1 × Wall mount
- 1 × Quick guide
PRODUCT OVERVIEW
- USB charging cable
- Surface cover
- UV-LED light
- LED indicator
- UV sterilization area
- Toothbrush holder
Maintenance and cleaning
Cleaning
Switch the product off and remove all plugs before cleaning!
Do not use aggressive or abrasive cleaning agents or materials such as
scouring milk or steel wool to clean the appliance. These can damage its upper
surface!
Protect the device from water. Only use a clean, dry cloth for cleaning the
appliance and never use any corrosive liquids. Clean the product with a soft,
dry cloth.
Make sure moisture does not enter the product while cleaning to prevent damage
to the product and related repairs.
Storage
Store the product in a dry environment, protected from dust and direct
sunlight.
Store your appliance inside the original case provided.
How to use
- Place a toothbrush, when dry, into the slot of the sterilizer.
- The device will start working once the cover is closed, and the white indicator light will switch on. The device will switch off after one minute.
- The indicator light will switch to red when the battery is low.
- The red indicator light will flash while the device is being charged. The indicator light will switch off once fully charged.
- Remove the sterilizer from the holding plate to charge the battery.
- The device takes about 1.5 h to be fully charged and the battery can last for up to 1 month.
- Once the device has been used, and if the cover remains closed, it will start working automatically every 6 hours.
Troubleshooting
Some issues that arise may be solved by the user. If the problem persists after having tried the following solutions, please contact Prozis customer service.
PROBLEM
- All lights are off.
- The device is not working.
CAUSE
- Is the device switched on?
- The battery is empty
SOLUTION
- Switch on the device
- Charge the battery
Warranty statement
All electrical and electronic products commercialized by Prozis via www.prozis.com are cov-ered by the warranty applicable to the purchase and sale of consumer goods.
GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis’ warranty for final
consumers.
This warranty is valid exclusively for consumers who purchase the product for
non-profession-al purposes.
WARRANTY PERIOD
Prozis guarantees the product is to remain free from material and production
defects for a 2-year period, counting from the date of initial purchase by a
consumer and respective deliv-ery, or for longer if legally established by the
applicable national law.
In the event that repair is required, this 2-year period is suspended during
repair time.
CONSUMABLES
The gradual performance decrease caused by prolonged use of the product’s
consumable components, such as batteries, is not covered by this warranty
unless the malfunction is caused by faulty design, materials or production.
HOW TO MAKE A CLAIM
If the need arises to exercise the rights conceded to you through this
warranty, please contact Prozis customer service via the communication
channels provided on the Prozis website, and follow the provided instructions
or recommendations. Contact and technical assistance information is also
provided at the end of this warranty.
Any claims made regarding this warranty will only be valid if proof of
purchase is presented by the original customer. This proof of purchase may be
the original invoice or receipt, as long as it includes information regarding
the date of purchase and the product’s model name.
WARRANTY REPAIRS
Any repairs made under this warranty cannot be made by third parties. This
warranty does not apply to any repairs, or damage caused directly by such
repairs, that have impacted or caused the damage that is the subject of the
respective warranty claim.
EXCLUSIONS
The following situations are not covered by this warranty:
- Any wear and tear of parts and components resulting from normal product use.
- Cracks, dents, scratches, and other types of superficial damage only affect the appearance of the product.
- Any malfunction caused by inappropriate use of the product that does not comply with user manual instructions.
- Use and storage of the product not complying with user manual instructions.
- Opening of the product by a third party who is not authorized to proceed to its repair.
- Altering or changing parts or components, whether internal or external.
- Damage caused by battery leakage resulting from the breaking of any of its components, or from product misuse.
- Malfunction or damage due to reasons that cannot be ascribed to the production or design of the product.
- Use of the product in the context of a business, occupation or commerce.
- Malfunction due to use that does not comply with the technical or security norms in force, or with user manual instructions.
The services provided by Prozis in order to repair or fix any fault or
malfunction resulting from the verification of any of the aforementioned
excluded situations will be subject to payment of labor, transport and
component costs.
The customer shall bear all risks of loss and damage to the product during
transportation to Prozis. This warranty will be void if the returned product
arrives with labels or stickers that have been removed, damaged, tampered with
or modified in any way.
LIMITED RESPONSIBILITY
Prozis cannot be held responsible for indirect damage or loss due to usage of
the product.
WHAT TO DO?
To request warranty service, you must first contact Prozis customer service
via the communication channels provided on the Prozis website, and follow the
provided instructions and recommendations.
Send back the product inside its original packaging, including all accessories
and documentation, to the following address:
PROZIS
Rua do Cais nº 198
4830-345 Póvoa de Lanhoso
Braga – Portugal
CONTACTS
Prozis is always available for additional clarification through their customer
service communication channel at
www.prozis.com/support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>