Shenzhen Semetor Electronics S31 Wireless Charger Instruction Manual

WIRELESS CHARGER
WIRELESS SPEAKER+TABLE LAMP
PRODUCT INSTRUCTIONS

Thank you so much for choosing our product, please read the manual carefully before using the product.

TABLE LAMP INSTALLATION METHOD

Align the light pole with the DC socket and install it on the main body.

FEATURES

• The shape is simple and delicate, with antique style.
• Antique small table lamp.
• Bluetooth Speaker.
• Knob dimming.
• Knob to adjust the volume.
• 15W wireless fast charging.
• Charging distance 58mm.

APPEARANCE BUTTONS

1 Lampshade
2 Knob function switch
3 Wireless charging area
4 Speaker horn decorative ring
5 Charging contacts
6 Light pole
7 Cavity
8 Type-C input port

OPERATION METHOD

1. Connect the USB port of the USB data cable to the power adapter, and the Type-C port to the wireless charger.
2. After the product is powered on, the charging indicator will flash twice.
3. Put the required wireless charging equipment in the charging indication area of this product, and the charging indicator will stay on for one minute to enter the charging state.

CHARGING INDICATOR FUNCTION

• When the product is powered on, the charging indicator will flash twice.
• When the phone is charged, the charging indicator will turn off automatically after a long light on for one minute.
• When a foreign object is detected, the charging indicator will flash quickly.

TABLE LAMP FUNCTION OPERATION METHOD

• When the rotary switch is turned to the right, the light is turned on, and when it is turned to the right, the brightness of the light gradually increases; when the rotary switch is turned to the left, the light gradually dims or even turns off the light. The brightness of the light cannot be adjusted when playing music.
• The desk lamp can be adjusted up, down, left, and right.

HOW TO OPERATE THE BLUETOOTH SPEAKER

When the power cord is plugged in, press and hold the knob switch for 2 seconds, the Bluetooth function is turned on and it is in the state of preparing for pairing, indicating that the speaker is searching for pairing. At this time, turn on the Bluetooth function of your mobile phone. In the Bluetooth device, search for the Bluetooth speaker and “531 “, click to select the “S31“ device name; automatically enter the pairing, after the pairing connection is successful, there will be a prompt sound.

How to use the knob switch:
When playing music,

1. Turn the rotary switch to the right to increase the volume. When it reaches the maximum volume, there will be a prompt sound; turn to the left to decrease the volume.
2. Short press the knob to play/pause.
3. Long press the knob switch for 2 seconds to cancel the Bluetooth pairing and enter the search state.

APPLICABLE DEVICE

This product supports fast wireless charging, which complies with the QI wireless charging standard; it realizes short-distance wireless power transmission through magnetic induction. This device supports all wireless charging devices that meet the QI standard. When using a 5V output adapter, Wireless charging supports a 5W load. When using an adapter that meets QC2.0 and above standards, the wireless charging supports 10W load;
Support overcharge protection (9V) and overcurrent protection (2A).

ATTENTION POINTS

• Do not use or store the product in direct sunlight or high-temperature places for a long time.
• Do not charge in places too close to magnetic cards, magnetic recording media, and precision instruments.
• Do not disassemble or modify this product.
• Do not touch the AC adapter with wet hands.
• Keep this product away from water or other liquids.
• If you want to clean the product, please disconnect the power.
• Product working environment temperature range: -20-45°C.

WIRELESS CHARGING SPECIFICATIONS

Material: Imported ABS+ PC+ Hardware
Input: DC5V/2A 9V/2A
Charging efficiency: 75%
Power: 10W/15W
Product size: 209 x 140 x 426mm
Product weight: 594g
Charging port: Universal Type-C

SPEAKER SPECIFICATIONS

Bluetooth version: 5.0
Bluetooth distance: 10m
Speaker power: 405W
Speaker specifications: 50mm

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– – Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>