Shenzhen Semetor Electronics S01 Wireless Charger Night Light Instruction Manual
- June 6, 2024
- Shenzhen Semetor Electronics
Table of Contents
S01 WIRELESS CHARGER NIGHT LIGHT
INSTRUCTION MANUAL
Thank you for choosing our products please read this manual carefully before using the products.
FEATURES
- Simple and exquisite,
- Charging distance≤55mm.
PRODUCT DESCRIPTION
- Charging area
- Touch switch
- lampshade
- Input interface
- Silicone anti-slip mat
HOW TO USE
- Please use Type-C to connect to the power adapter, and then put your phone in the wireless charging area.
- White indicator light and blue indicator light each flash once, then the white light is always on after the product is powered on.
- When entering the charging mode, the white light will change to blue, and the blue light will be always on.
- Touch Control Dimmable Lamp
• Short touch-first white light for 30% brightness
• Short touch second white light for 60% brightness
• Short touch third white light for 100% brightness
• Short touch the fourth cycle of seven lights on
• Seven colored lights played in loop condition double click to pause playing/double click to continue playing
• Long touch in any state for 2 seconds to turn off the light
APPLICABLE EQUIPMENT
Intelligent identification of charging equipment; compatible with major brands
and mobile devices that meet QI standards iPhone: iPhonel3/13 pro/13 pro
max/13 mini/12/XR/XS/XS Max Samsung: Galaxy/56/S7/S8/S9/Note 8/Note 9 Huawei:
Mate RS/20 Pro/20 R/ P30 Pro Xiaomi: MIX/2S/MIX 3/MI9 (The above are some
mainstream devices)
Note: This product supports fast wireless charging and meets the Qi
wireless charging standard; short-distance wireless power transmission is
realized through magnetic induction, and this device supports all wireless
charging devices that meet the QI standard. When using a 5V output adapter,
the wireless charger supports a 5W load. The wireless charger supports
5W/7.5W/10W 15W charging when using QC2.0/3.0 standard adapter. This product
will enter an over-voltage protection state when the input voltage is greater
than or equal to 10.5V.
PRECAUTIONS
- Do not use or store the product in a place exposed to direct sunlight or high temperature for a long time.
- Do not charge in places that are too close to magnetic cards, magnetic recording media, and precision instruments.
- Do not disassemble or modify this product.
- Do not touch the AC adapter with wet hands.
- Keep this product away from water or other liquids.
- If you want to clean the product, please disconnect the power.
- Product working environment temperature range: -20-45°C.
SPECIFICATIONS
Product material: Imported ABS+ PP
Power input: DC5V/2A 9V/2A
Charging efficiency: 75%
Battery capacity: 400mAh
Charging power: 5W/7.5W/10W/15W
Product size: 220x100x76mm
Product weight: 338g
The power charging port is an international type C port
voltage is 10.5V.
PACHAGING CONTENTS
lInstruction
1 Packing box
1 *USB Power cord
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operated
in conjunction with any other antenna or transmitter
Made in China
350×90mm
128g
Documents / Resources
|
Shenzhen Semetor Electronics S01 Wireless Charger Night
Light
[pdf] Instruction Manual
S-01, S01, 2AYRHS-01, 2AYRHS01, S01 Wireless Charger Night Light, Wireless
Charger Night Light
---|---