Shenzhen Semetor Electronics S30 Wireless Charger with LED Night Light Instructions

WIRELESS CHARGER WITH NIGHT LIGHT

PRODUCT INSTRUCTIONS

Thank you so much for choosing our produCt, please read the manual carefully before using the product.

FEATURES

• Simple modeling with antiques.
• Small night light imitating a candle.
• Rotary dimmer.
• Charging distance-C.8mm.

APPEARANCE BUTTONS

1. Lanterns in iron art
2. ABS lamp shape
3. Decorated in a circle
4. Rotary dimmer
5. Wireless charging area
6. Charging indicator light
7. USB output port
8. Type-C input port

DIRECTIONS FOR USING

1. Connect the USB port of the USB data cable to the power adapter and the Type-C port to the wireless charger.

2. After powered on, the charging indicator will flash twice.
   

3. Place the required wireless charging device on the charging area, the charging indicator light is always on to enter the state of charging.

4. The USB interface can be used to charge mobile phones or electronic products that do not support wireless charging. (input:SU/1A)

FUNCTIONS ANALYSIS

Charging Indicator Function

• When the product is powered on, the indicator will flash twice.

• When the mobile phone is charging, the charging indicator will turn off automatically after flashing one minute.

• The indicator will flash quickly when foreign substance examination.
  Rotary Dimmer Function

• When the rotary switch is turned to the right, the light is turned on, when the rotary switch is turned to the right, the brightness of the light gradually increases; when the rotary switch is turned to the left, the light gradually dims, even turning off.

• Short press the rotary switch to enter the imitating candlelight jitter mode; short press again to return to the normal mode.

DIAGRAM FOR LANTERN INSTALLATION

Step1

Align the lampshade with the buckle and install it on the main body.

step2

Buckle the lantern to the buckle on the outside

APPLICABLE DEVICE

The wireless charger is compatible with all Qi-compatible wireless charging devices
: iPhone:iPhone X iPhone XR iPhone XS Max
Samsung: Galaxy S6 Galaxy S7 Galaxy S8 Galaxy S9 Note 8 Note 9
Huawei: Mate RS Mate 20 Pro Mate 20 RS P30 Pro
Xiaomi::MIX 2S MIX3 1419
(The above are some mainstream devices)

NOTE: This product supports fast wireless charging, which complies with the QI wireless charging standard;
it realizes short-distance wireless power transmission through magnetic induction. This device supports all wireless charging devices that meet the QI standard, When using a 5V output adapter Wireless charging supports SW load. When using an adapter that meets QC2.0 and above standards, the wireless charging supports 10W load; Support overcharge protection (9V) and overcurrent protection (2A).

ATTENTION POINTS

• Do not use or store the product in direct sunlight or high-temperature places for a long time.
• Do not charge in places too close to magnetic cards, magnetic recording media, and precision instruments.
• Do not disassemble or modify this product.
• Do not touch the AC adapter with wet hands.
• Keep this product away from water or other liquids.
• If you want to clean the product, please disconnect the power.
• Product working environment temperature range: -20-45°C

SPECIFICATIONS

Material: imported ABS+hardware
Input:KW/2.1A 9V/2A
Output:DC5V/lA Charging efficiency:75%
Power:SW/7.5W/10W/15W
Product size:190 x 171 x 113mm
Product weight:230g
Charging port:Universal Type-C

PACKING

Wireless charger:1
USB data cable:1′ Manual:1
Gift boxa
Environment-friendly blister box:1

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not  installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>