Shenzhen Semetor Electronics Co LTD S02 WIRELESS CHARGER SPEAKER NIGHT LIGHT Instruction Manual
- June 13, 2024
- Shenzhen Semetor Electronics Co LTD
Table of Contents
Semetor Electronics Co LTD S02
WIRELESS CHARGER+
SPEAKER· NIGHT LIGHT
PRODUCT INSTRUCTIONS
S02 WIRELESS CHARGER SPEAKER NIGHT LIGHT
Thank you so
much for choosing our product, please read the manual care1ully before using
the product.
PRODUCT FEATURE
- Slmple and exquisite shape.
- Night light.
- Wireless fast charge.
- Wireless speaker
- Chargmg distance ≤6mm.
APPERANCE BUTTONS
- Wlreless Charging Area
- Lempshede
- Earphone Charging Area
- Indicator
- Function button
- Speaker cavity
- Type-C input
- Silicone shackles
METHOD OF OPERATION
OPERATION METHOD
- Connect the USB date cable to the power adepter and the Type-C port to product.
- After the product is powered on, the charging icon “•” flashes, and it is always on when fully charged.
- Putthe required wlreless charging equipment In the charging area of this product, and wlreless charging instructions The light ‘•’ Is always on, it is in the charging state, and the wireless charging indicator is off after it is fully charged.
NIGHT LIGHT FUNCTION
- Short press to turn on/off the night light.
- Long press to adjustthe brightness of the light.
HOW TO USE WIRELESS SPEAKERS
Long press [ ], thara will be a prompt tone, bluetooth function will be turned
on, in the palring state, turn on the Bluetooth function of your phone, In
bluetooth devices,”S02″ appears in the search for Biuetooth speaker.
Click to select the device name of “S02” Automatically enter the pairing,
after the pairing connection is successful, there will be a prompt tone. Hold
down [ ] again to exit the Bluetooth function.
When the speaker is playing:
-
Press[ ] Play/pause.
Long press [ ] Turnon/off Bluetooth -
Press [ ] reduce the volume;
Long press [ ] switch to the previous song. -
Press [ ] increase the volume;
Long press [ ] to switch to the next song.
APPLICABLE EQUIPMENT
This product supports fast wireless charging function and complies with the QI wireless charging standard: The application method reallzes short-distance wireless power transmission. This device supports all Ql-compllantWireless charging equipment. Use QC or PD power adapter that supports 5V/9V/12V output, The mobile phone wireless charging part supports 5W/7.5W/10W/15W output, and the earphone Part supports 2.5 WW output, and over-temperature protection.
NOTICE
- Do not use or store the product in direct sunlight or high temperature places for a long time.
- Donot charge in places too close to magnetic cards, magnetic recording media, and precision instruments.
- Do not disassemble or modifythis product.
- Do not touch the AC adapter with wet hands.
- Kaep this product away from water or other liquids.
- If you want to clean the product, please disconnect the power.
- Product working environment temperature range: -20~45°C.
SPECIFICATIONS
Material: imported ABS+ hardware
Power input: DC5V/3A 9V/2.77A 12V/2.5A
Charging efficiency: ≥ 75%
Power: 5W/7.5W/10W/15W
Battery capacity: 1800mAh
Weight: 646 g
Speaker power: 6W
Product size: 85×85×172mm
The charging port of power supply is the international type-c port
Made In China
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 0 cm between the radiator and your body.
IC Warning
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device.
The information listed above provides the user with information needed to make
him or her aware of a RF exposure, and what to do to assure that this radio
operates within the FCC exposure limits of this radio.
The device complies with RF specifications when the device used at 0 cm from
the body.Third-party belt-clips, holsters, and similar accessories used by
this device should not contain any metallic components. Body-worn accessories
that do not meet these requirements may not comply with RF exposure
requirements and should be avoided. Use only the supplied or an approved
antenna.