Govee H6152191 Motion Sensor LED Light Strip User Manual
- June 5, 2024
- Govee
Table of Contents
Govee H6152191 Motion Sensor LED Light Strip User Manual
At a Glance
| Strip Lights | 1 |
|---|---|
| Power Adapter | 1 |
| User Manual | 1 |
| Service Card | 1 |
Specifications
| Length | 6 x 1.64ft (6 x 0.5m) |
|---|---|
| Lighting Color | Warm White |
| Waterproof | No |
| Control Method | Control Box & Motion Sensor |
| Power Supply | 5V/1A Adapter |
| Sensing Range | 2m (6.56ft) |
| Sensing Angle | 100° |
Installing Your Strip Light
-
Preparation Before Installing
a. Unpack the box and check all items listed in the packing list.
b. Power on the strip light and check whether it lights up. -
Installing Steps
-
Wipe the surface to keep it clean and dry.
-
Peel off the protective film on the tape, stick the strip on and press over it firmly.
(Notice: Do not install it in a location that directly faces human body. As it’s hard for the sensor to detect the motion facing to wards it.) -
Reinforce via clips around corners.
-
Peel off the protective film on the control box and stick it on.
-
Connect the control box to the power adapter, power on the strip lights and start to use.
Controlling with the Control Box
| Button | Function |
|---|
On/Off & Motion
Sensing Mode| 1 .Press it and the indicator shows blue, indicating the Motion
Sensing Mode is on. (Motion Sensing Mode: Auto on if motion is detected within
its effective range. Auto off if motion is not detected for 15s.) 2.Press and
hold it to turn on the light. The indicator is off.
Brightness Adjustment| Press to brighten the light between 6 levels.
Troubleshooting
-
The strip doesn’t light up in Motion Sensing Mode.
-
Re-plug and turn on the strip lights to check whether the indicator shows blue. If not, please press the On/Off button to turn on the Motion Sensing Mode.
-
Do not expose the control box to the direct sunlight.
-
Do not install the strip lights in an area that directly faces the air conditioner or the radiator.
-
Do not install the strip lights in an area with high humidity.
-
Make sure the area in front of the motion sensor is obstruction-free.
-
The adhesive tape is not strong enough.
-
Make sure the installation surface is clean and dry.
-
Firmly press over the strip after sticking.
-
Reinforce the installation via more clips and tape.
-
The control box doesn’t work.
Re-plug in the USB port and try again. -
Some lamp beads don’t light up.
Please contact Govee support team in time for return.
Compliance Information
EU Compliance Statement:
Shenzhen Intellirocks Tech Co. Ltd. hereby declares that this device is in
compliance with the essential requirements and other relevant provisions of
the Directive 2014/30/EU. A copy of the EU Declaration of Conformity is
available online at www.govee.com/
EU contact address: BellaCocool GmbH (E-mail:
info@bellacocool.de)
PettenkoferstraRe 18, 10247 Berlin, Germany
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
similar collection points. With this little personal effort, you contribute to
recycle valuable raw materials and the treatment of toxic substances.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, tie user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Govee
@Govee
@Govee
@Goveeofficial
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>