ONFORU D30WIFI Smart Alexa RGB Floodlights Instruction Manual

SMART ALD LIGHT Product
manual Manual

SAFETY INFORMATION

Disconnect the porter supply before ramping any won’t on the unit!

• Installing these units involves work on the maim voltage Guppy, ir*taTabon must Mereore be carried out professionally,n accordance with the app, ance national win ng reg;–actions and eec7ica, operating con tons.
• Never pug the .got in with wet hands in case of electric snock
• Cherie all components for damage. 00 not a project damaged.
• To ensure 7* prat= can work normally. please use it in the vorZge within the range on the lamp label
• The loos get enormous reheats up when the Agra is on Ony adjusts the angle of the panel once it has cooled down. Do not look into the LED i-grit at a short-range or any prolonged pencil(>5 min).
• Do not install the unit on (normally) flammable surfacer..
• Do not alter Or Change part of the light at will. in case of an act: cents such as breakage, `all. electric snook. fire. etc.
• The light is IP86 waterproof. but the plug C non-waterproof Pease connect the plug indoor or connect to a socket that navies I P65 protection.

PARAMETER

COMPONENTS AND STRUCTURE

1. Tempered Gide; Lui
2. LED Light Source
3. Lamp Bracket

Note: Cord – type Y attachment For type Y attachment: It the external flexible cable or cord of Ins emirate is damaged, II snail De exclusively replaced by the manufacturer of his serval agent Or n similar outfitted person in order to avoid a hazard.

NOTE

1. Make sure at the distance between the light and the object being tit is more than 1 meter, so as to avoid tvgti temperature caused by short CIWane*.
2. Safety Cuts II-This lamp is doubly insulated and may not be wired to a protective conductor.
3. Caution. risk of electric shoo*
   Non-User Replaceable Light Source
   The light source contained in this flood: grit shall only be replace0 by the mom:act-Ter or his service agent or a similarly qualified person.

Limitation of Indoor and Outdoor Use

1. Tris light is waterproof and dustproof It is protected against rain, DO it cannot be unmerged in water
2. Tie moun-ng Atzmon of the site should be abet bear a: east 10 tines as heavy as The ! gm.
3. Turks light should be used in condition with sound heat Ossipaton. The wrong temperature of it should be ess Man 45°C Overnight working temperature lull cause serious lumen depression and affect the lifespan of tie lght

PAIRING LED LIGHT WITWSMART LIFE’ App.

NOTE: Turn Oter1FF he Smart -ED Light three Omer, until the LEO Light Starts to flash guk*Iy. wrist’ explicates the success., of the factory reset
Step 1: •rrkirt Life’ App. installation. There are 2 Wawa for obtaining and! recalling the ‘Smart Lite App. on your smart deuce

1. Scan the OR code on ale right
2. Search for ‘Smart Life’ !n the App. Store or Google Play.

https://smartapp.tuya.com/smartlife

Step 2 Enter the “Smart Life’ App and register an account and ogin If you a: ready have an account tot Smart Lite App. Please select tog in win existing account
Note: You wit need your “rowan Life’ App. username and password to pair with Amazon Alexa action Google Assistant

Step 3. Add the LEO Light to Smart Lite App. Tap the button on top of NRC Corner to add a device. then =plighting device to enter next page.
Note: This smart LEO Lgrit can only support a 2.4 0Hz network and cannot work with a 5.0 GHz network Please check or your home network is 2 GHz and make sure that your phone has been connected to your Wi-Fi network. Please ensure your network is not hidden

Step 4. How to pair The ._ED Light

1. Power on Me LED L.ght.
2. Power on and if it Trees times quickly until We LED chips flashes. 1 indicates that the flood tight has entered pairing mode.
3. Tap the confirmation button to pair the LED Light
4. Enter a Wi-Fi password to pan your network. Please
   Note
   a. This smart LED Light can only support a 2.4 GHz network and cannot work with a 5.0 GHz network.
   b. Please check if your home network is 2.4 GHz and meow sure that your phone has been connected to your Wi-Fi network. Please ensure your network is not hidden. 5. Wait Ni it is successfully connected.
   Note: If the LED Light is still flashing until the progress map reaches 100%. the paring fails. and you will need to repeat the previous 4 steps to pair the LED Light.

Step 5. Name Me LEO -_ight aria tap ‘Done. You will find a device you’ve named it shown on Me App. homepage. Tap tie device to enter the setting page
Note: The name you give to the device wt. be the name for vOCe contra on Amazon Alexa or Gouge Horne later For example. the device s named ‘Smart -E0 Lignr n 714 user puce.

AMAZON ALEXA

Please make sure that your Alexa App. is connected to Amazon Echo. and both work together successfully under your Wi-Fi network.
Step A: Log in to your Alexa App., tap an at the too left corner. and tap ‘Skills”.

Step B: Type ‘Smart Life’ to search for ‘Sznan LA. and enable ‘Smart Lite’ on Alexa

Step C: Enter your aCCount and password of Smart tie App„ tap ‘Link Now- men tap’ Aulnonze- on the next page authorize &mart site Into to Alexa. Note Came account and password as Smart Life App

Step D: On your Smart Life account is soccer…1w y connected to Mexa, the town page will pop up. Tap • Done’ on the top left corner, then “D: C.C.Cv ER DEVICES’ on the next page
step E: Wat a few sewn= hoc Alexa to Detect me …E0 Light from Smart Lie App. ana you w- I, find me clever names ‘smart LED sugar has been paving to mesa App from Smart tile App. After *p E s Cone. you can now control my light with Alexa App. on Ins setting page. A. slide to change brignmez B. ap to turn on. for me right Center to change colors
Try these commands and see what happens Dy &a- Ong Alexa: Alex& turn on ‘device name’ Alexa. turn of ‘device name’ Alexa, set ‘device name’ to ‘co or Alexa, set ‘device name’ to ‘number, For example, Alexa. turn on Smart LEO -grit’, ‘Alexa. aim Smart LEO Light to E0,4’ etc. Not The device name is there you give to the LED Light on Smart Life App. In tens user guide. the device s named ‘Smart LED Ugh:*

GOOGLE ASSISTANT APP

Step A: Open your Goole Horne App. tap ‘Home Control’ on tne Leh Side Bar page. Step B Tap button on the cotton, ngh: corner lt enter next paw
Step C: Fula ‘Smart ute from Me: roe oar list
Step D: Enter your account and password of Smart Live App tap ‘Link Now’ then tap ‘Au: bonze’ on ale next page to authorize your Smart L fe Account I nip to Google Home Note Same account ana password as Smart _re App
** Step E:* Yount f:nal Gcoge home Homs found Te Eevee named Sma r. _EC UV-iron us page
Try these commands and see what happens by using google:
ok: Google. turn on device name’
ok, Goog e. turn ‘device name’
ok. Goog e. set Me ‘Rev on the name’ to ‘color
ok, Goog e. set ‘clever name’ to ‘number
For example, Google turns on Smart LED Light. Google. aim Smart LED Light To 50•.’ etc.
Note: The de’: ice name s the one you give to the LED L)pt on Smart Lie App. In this user guide. the Device is named ‘Smart LEO Light.

INSTALLATION STEPS

Step 1: According to x) the spacing I see 7*-A: part of the picture) of two screw D1s on one LDE ! grit bracket drill two mounting holes.
step 2: Put the bracket onto the prepared mounting holes and then screw it on.
step 3: Adjust the beam direction as you like, aria men, plug into the main socket.

GENERAL MATTERS FOR ATTENTION

1. This smart LED Light can only support a 2.4 GHz network ono cannot work with a 5.0 GHz network. Please check if your home network is 2.4 GHz and make sure that your phone has been connected to your Wi-Fi network. Please ensure your network is not hidden.
2. if you fail to connect the LED Light with your Wi-Fi, please check whether your network is stable and fast. Slow networking speed may result in failure of connection.
3. if you fail to connect the LED Light with your WI-Fi, please ensure your Wi-Fi password s correct. If not, please re-enter the correct password.
4. Wi-Fi Connection Issues If a router/VA-Ft password changes or additional smart devices register with the “Smart Life App., a factory reset of the Smart LED Light is required
5. If any matters regarding Smart LED Light connection happens, you can reset the factory setting of _ED Light, then re-connect the Smart LED Light.

Operation / Maintenance

• Prior to cleaning the light make sure it has been disconnected from the power supply-
• The unit is not suitable for burglar alarm systems as it is not tamperproof in the manner prescribed for such systems_
• Never use any chemicals or corrosive substances for cleaning.

Disposal
Electrical and electronic equipment. accessories and packaging must be recycled in an environmentally compatible manner.

Do not dispose of electrical and electronic equipment as domestic waste.
EU countries only
Under the current European Directive on Waste Electrical and Electronic equipment and its implementation in national law. electrical and electronic equipment no longer suitable for use must be collected separately and recycled in an environmentally compatible manner

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to pal 15 ci the FCC Riles. These Wes are designee to provide reascratte protection against harmful interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, rf not stated and used in accordance with the narrators, may cane harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. A witch can be determined by turning the equipment off and on, the user is encouraged to try to oar the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Cermet the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Gamut is the dealer or an experienced Fazioli technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment This device copies with part 15 of the FCC Ries. An operator is subject to tire to-Lowing two conditions: 1 I Tns device may not cause harmful interference, and (2) this device must accept any NTC-reference received. *eliding interference that may come undesired operation.
RF Exposure information Ths equipment complies with FCC radiation exposure links set forth for an Inca-rolled env cement This equeornent should be installed and operated with a minimum distance of 20cm between the radiator and your body
Manufacturer / Hersteller.
Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gang Si
Address qian war Yi lu 1 hao A dong 201 shi Qian hai then gang he Zuo Qu Shen Then, Guang Dong, 518000, CN
[email protected]
www.onforuleds.com

**EU REP**BellaCocool GmbH PettenkoferstraBe 18 10247, Berlin Germany [email protected]
**UK REP**MDH LIGHTING LTD
UNIT G25 WATERFRONT STUDIOS 1 DOCK ROAD
LONDON UNITED KINGDOM E16 1AH
[email protected]
Made in Cnina

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>