REDRAGON Elise Pro Low Profile 63 Key Mechanical Keyboard Instruction Manual
- June 6, 2024
- REDRAGON
Table of Contents
REDRAGON Elise Pro Low Profile 63 Key Mechanical Keyboard
Dear user
Thank you for choosing product. To protect your rights and for better
customer service, please read the following warranty rules carefully.
1. Within 18 months of purchase date, repair is guaranteed for failure due to
electrical circuit problems. Other damages, such as disassembly, hard impacts,
submersion into water, plugging into improper current or voltage, and damage
caused by natural disasters such as fire, flood, or earthquake are not
included.
2. Consumable parts (such as foot pads) and spare parts replacement are not
included in our warranty.
OS support
Windows XPNista/Win7/Win8/Win10
How to connect the keyboard with a computer Wired Connection
- Slide the 2.4G/OFF /ST switch on the bottom of the keyboard to OFF.
- Take out the USB A to USB Type C cable in the package and connect the keyboard with your computer.
- The computer will recognize and configure the keyboard automatically.
- The keyboard will be ready for use when the configuration is finished.
- Once the keyboard is powered up, charging begins. The LED marked with M light s flashes in white then turn to red. It will turn to white when the keyboard is fully recharged.
4G Wireless Connection
- Slide the 2.4G/OFF/BT switch on the bottom of the keyboard to 2.4G.
- Take out the nano USB receiver and plug it into an available USB port on your computer. The computer will recognize and configure the keyboard automatically.
- The keyboard will be ready for use when the configuration is finished.
- In some cases, you may need to pair the keyboard. Turn on the keyboard and press [FNJ+[2.4GJ for about 3 seconds, the LED marked with M flashes in green, plug the USB receiver into any available USB port on your computer within 20 seconds. The keyboard will be paired automatically. Make sure the keyboard has enough power before doing so.
- The indicator will flash when the battery is low. Please recharge the keyboard in time or it will turn off automatically soon.
Bluetooth Connection
1. Slide the 2.4G/OFF/BT switch on bottom of keyboard to BT.
2. Press [FN]+[BT1 ](or [BT2]/[BT3] for other Bluetooth devices), the LED
marked with M flashes in blue (or cyan/magenta for the others)
3. Turn on Bluetooth and scan for available devices on your computer or smart
phone. It will find “BT3.0KB or BTS.0 KB” device. Select it and it will
connect automatically.
Function Introduction
1. With standard USB and 2.4G/BT connections, the keyboard can be used on
computers without any software or driver installation.
2. There are 20 backlight effects: FN+”\l” key(marked Mon the key)
3. Commands of key combinations with [FNJ key
[FN+”-_ “]:Fl 1
[FNJ + [Win]: Disable or enable the [Win] key.
[FNJ + [QJ: Select Bluetooth device one (for Bluetooth connection).
[FN] + [WJ: Select Bluetooth device two (for Bluetooth connection).
[FN] + [El: Select Bluetooth device three (for Bluetooth connection).
[FN] + [R]: Change to 2.4G wireless connection. Press and hold the [FN]+[4]
for 3
seconds to pair the keyboard with its receiver.
FN+P=PRTSC
FN+([=HOME
FN+]}=END
FN+;:=PGUP
FN+'”=PGDN
FN+.>=INSERT
FN+/?=DELETE
FN+ space : Turn On or Off the backlight.
FN + CapsLK: Set the keyboard to the default setting.
FN+Enter: Change backlight color.
FN+ j/ t: Decrease/increase the backlight brightness.total 5 levels. FN+ +-/-:
Change light running speed, total 5 levels
How to set the backlighting
Press FN+Backspace to get started setting, AWSD keys default in green color in
the moment, Press FN+Backspace again, CapsLK is flash in Red in the moment,
press desired key for color setting, the single key color is
Red/green/blue/yellow/purple/Cyan/white/OFF by each click, fix the color you
want, press FN+Backspace again to save setting, press FN+Backspace to quit the
setting mode
How to charge the keyboard
Find the USB A to USB type C cable in the packaging,plug the keyboard and
connect it with a computer for charging, the LED indicator of the keyboard
will turn red.
Indicators on keyboard right part uA” is for Capitals lock indication
.”M” is for connection mode indication
FAQ
1. If the keyboard doesn’t respond, please check if the keyboard’s USB cable
is correctly inserted into the corresponding USS port on the computer, or try
another USS port on the computer.
2. If you spill liquid on the keyboard, please remove the keyboard’s USB
cable from the computer immediately. Wipe up excess liquid and put the
keyboard in a warm place (for instance, under a lamp) to let the keyboard dry
naturally before using again.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1 )this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>