REDRAGON K630RGB Black RGB Dragonborn Gaming Keyboard User Manual
- June 5, 2024
- REDRAGON
Table of Contents
REDRAGON K630RGB Black RGB Dragonborn Gaming Keyboard
Thank you for choosing our REDRAGON product. To protect your rights and for
better customer service, we ask that you note our warranty rules.
- Within the guaranty period, the repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquakes are not included.
- Consumable parts (such as footpads) and spare parts replacement are not included in our warranty.
OS support
Windows XP/Vista/Win7/Win8/Win10
How to plug in
Plug type C cable to USB cable with keyboard and PC, the keyboard is plug and play, no need driver.
Key Function Introduction
FN key work with other keys
- FN+1) = F1
- FN+(2@ = F2
- FN+ (3#] = F3
- FN+ [4$) = F4
- FN+ (5%] = F5
- FN+ (6^) = F6
- FN+ (7&) = F7
- FN+ (8*) = F8
- FN+ [9d = F9
- FN+ 0)) = F10
- FN+ =F11
- FN+ =+] = F12
- FN+[ =Insert
- FN+ }) = DEL
- FN+ ;:] =Home
- FN+ “) =End
- FN+ .>) =PgUp
- FN+ /?] =PgDn
- FN+A) = Left arrow key
- FN+ (W] =Up arrow key
- FN+ (S) = Down arrow key
- FN+(D) = Right arrow key
- FN+ [ESC] = “
- FN+ESC Press and hold for 3 seconds for back to factory setting.
Backlight setting
- FN+ (Alt R): Go with the stream, Clouds fly, Winding Paths, The trial of Light, Breathing, Normally on, Pass without Trace, Ripple Graff, Swift action, Digital Times,Flowers blooming
- FN+ M : Adjust lighting brightness (Total 5 levels).
- FN+( : Adjust lighting speed(Total 5 levels).
- FN+ ISpacebar] : Entering backlight color selecting mode by pressing FN + [Spacebarl, Spacebar] will keep flickering between all RGB colors. If not, then this backlight mode is not supported (The Trial of Light & Flowers Blooming are not available for this DIY mode). Next, press the key of the color you want to set. Then, all backlight modes will be in that color.
- FN+WIN: To Lock Windows key, repeat to unlock.
FAQ
- 1. If the keyboard doesn’t respond, please check if the keyboard’s USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
- If you spill liquid on the keyboard, please remove the keyboard’s USB cable from the computer immediately. Wipe up excess liquid and put the keyboard in a warm place (for instance, under a lamp) to let the keyboard dry naturally before using it again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>