REDRAGON K509P-WS Dyaus Pro Wireless Gaming Keyboard Instruction Manual
- June 5, 2024
- REDRAGON
Table of Contents
DYAUS PRO
WIRELESS GAMING KEYBOARD
https://qr24.cn/Aa4r16
Please scan hear to
download user manual
Wireless /wired RGB Gaming keyboard Operating Instructions
Dear user
Thank you for choosing or o N product.To protect your rights and for better
customer service, please read the following warranty rules carefully. 1.
Within 18 months of purchase date, repair is guaranteed for failure due to
electrical circuit problems. Other damages, such as disassembly, hard impacts,
submersion into water, plugging into improper current or voltage, and damage
caused by natural disasters such as fire, flood, or earthquake are not
included. 2. Consumable parts (such as foot pads) and spare parts replacement
are not included in our warranty.
OS support
Windows XPNista/Win7/Win8/Win10
How to Charge keyboard
Find the USB A to USB Type-C cable in the package, plug the keyboard and
connect it with a computer for charging , the LED”M” indicator of the keyboard
will turn to red. Remark: The LED-M” Indicator will flash in red when the
keyboard is short of power.
Warning:
Charging Input: 5V 1A
How to connect the keyboard with device
- Wired Connection
1.1 Slide the ON/OFF switch to OFF.
1.2 Take out the USB A to USB Type C cable in the package and connect the keyboard with your computer.
1.3 The computer will recognize and configure the keyboard automatically.
1.4 The keyboard will be ready for use when the configuration is finished.
2. 2.4G Wireless Connection
2.1 Slide the ON/OFF switch to ON.
2.2 Turn on the keyboard and press [FN [-WWI for about 3 seconds, the LED M flashes in green, plug the USB receiver into any available USB port on your computer within 20 seconds. The keyboard will be paired automatically. Make sure the keyboard has enough power before doing so.
2.3 The keyboard will be ready for use when the configuration is finished.
2.4 The indicator will flash when the battery is low. Please recharge the keyboard in time or it will turn off automatically soon.
3. Bluetooth Connection
3.1 Slide the ON/OFF switch to ON. 3.2 Press (FN)+(3T1)(or (BT2)/(BT3) for
other Bluetooth devices), the LED M flashes in blue (or cyan/pink for the
others)
3.3 Turn on Bluetooth and scan for available devices on your computer or
smartphone. It will find the “BT3.0KB or BT5.0 KB” device. Select it and it
will connect automatically.
Function Introduction
- Brightness adjustment: Press and hold the (FN) key, and then press the arrow key or “,1” to increase or decrease the backlight brightness of the keyboard.
- Adjustable lighting speed: Press FN+ •— ) or ( —•) to decrease or increase lighting effect speed
- To lock or unlock the [WIN) key : FN+ W n_L , repeat to lock or unlock.
- There are 6 pre-set backlight patterns 1) FN+INS : Specter 2) FN+DEL: Neon 3) FN+HOME: Steady ON lighting switch In 7 colors 4) FN+PGUP: Steady ON lighting in Red, Green,Blue mixed color 5) FN+PGDN: Click to trigger the light 6) FN+END: Breathing
- Back to factory setting: FN+ESC
- Multimedia function: 12 multimedia keys <1>FN + F1= Media <2>FN + F2= Volume- <3>EN + F3= Volume+ <4>FN + F4= Mute <5>FN + F5= Stop <6>FN + F6=Prev Track <7>FN + F7= Play/Pause <8>FN + F8=Next Track <9>FN + F9= Mail <10>FN + F10=
Web/Home <1 l>FN + Fl I= Computer <12>FN + F12= Search
FAQ
- If the keyboard doesn’t respond, please check if the keyboards USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
- If you spill liquid on the keyboard, please remove keyboards USB cable from the computer immediately. Wipe up excess liquid and put the keyboard in a warm place (for instance, under a lamp) to let the keyboard dry naturally before using again.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates uses and can radiate radio
frequency energy and, if not installed and used In accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>