REDRAGON DS-2914A 26000 DPI MMO Wireless Gaming Mouse Instruction Manual
- March 22, 2024
- REDRAGON
Table of Contents
**REDRAGON DS-2914A 26000 DPI MMO Wireless Gaming Mouse Instruction Manual
**
Dear user
Thank you for choosing our REDRAGON product. To protect your rights and for better customer service, we ask that you note our warranty rules.
- Within guaranty period, repair is guaranteed for failure due to electrical circuit problems. Other damages,such as disassembly, hard Impacts, submersion into waer, plugging into improper current o voltage, and damage caused by natural disasters such as fire, lood, or earthquake are not included.
- Consumable parts (such as foot pad) and spare parts replacement are not included in our warranty.
Basic Operation:
How to Connect the Mouse with a Computer
- Take out the USB to US8 C calanthe package and connect the mouse with your computer.
- Side the power switch on the bottom of the mouseat any mode(8T/OFF/246), The mouse s undercharging whatever the power stich is BT or OFF or 246
- The computer will recognize and configure the mouse automatically at wired mode
- The mouse will e ready for use when the configuration i finished
4G wireless pairing
-
Take out the USB receiver in the package and plug it into any available USE port on your computer please note that the USB receiver can be storage on the bottom of
2. Slide the power switch on the bottom of the mouse to 2.4G. -
The computer will recognize and configure the keyboard automatically.
BT wireless pairing
- Slde the power switch on bottom of mouse to BT.
- Press and hold the BT pairing button for 3 seconds,
- Turn on the PC or tablet PC blustooth,scan the available devices
- PC will detect the BTS.1 mouse, press it for pairing.
Auto sleep and power save function
The gaming mouse will b sleep mode ft s out of workin 1 min, please move the
mouse orpress any key o wake it up.
How to Recharge the Battery
- The scroll wheel light will lash in Red when battery is low, you need to recharge the
- Take out the USB to USB C cable and connect the mouse and any USB power output port. While the battery is under recharging, the scroll wheel lights up i red color, then it turn to DPI state’s indicated color
- Charging time s around 5 hours.
- Note : Slide the power switch on the bottom of the mouse to OFF for long term storage.
CAUTION: DO NOT CHARGE THE MOUSE BY WALL PLUG, INPUT VOLTAGE MAX 7V.
Button Instructions
-
Left mouse button.
-
Right mouse button.
-
Scroll wheel (clicked as middle mouse button)
-
5ide key, defaulted function: Left Forward key on the keyboard.
-
Side key, defaulted function: Left Backward key on the keyboard,
-
DPl+ key
-
0k key
-
BT pair key(Press for pairing).
-
Mode switch key: BT/OFF/2.4G modes available.
Button Instructions
-
Teflon foot pads: Large wear-resistant materials let the mouse move more smoothly.
DPI adjustment and indication
DPI indicator light: Behind the Scroll Wheel key, there is a DPI
indicator light.
Red ——Gear 1 (1000 DPI)
Blue —— Gear 2 (2000 DPI) Defaulted
Green —- Gear 3 (4000 DPI)
Yellow — Gear 4 (8000 DPI)
Cyan —— Gear 5 (13000 DPI)
Purple — Gear 6 (26000 DPI)
Report rate adjustment by press middle button+ backward button
Report rate indicator light is under the Scroll Wheel key
125HZ/twinkle 1 time
250HZ/twinkle 2 time
500HZ/twinkle 3 time
1000HZ/twinkle 4 time
RGB backlight adjustment by press middle button+ forward button
The mouse backlight switch among ON/Breath/Wave/Neon/Marquee/Mix color
wave/OFF.
FAQ
- If the mouse s not responding, please check whether the mouse is plugged correctly i the corresponding computers USB port, or try another USB ports
- If the mouse is moving slowly, jumping or with delay, please try another surface.
Dark, dirty, un-flat, bright surfaces may affect the performance of mouse. Mouse pad strongly recommended.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.These limits re
designed to provide reasonable protection against harmful interference n a
residential installation. Ths equipment generates uses and can radiate
radiofrequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However
there i no guarantee that interference il ot occur in particular installation.
I this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user s encouraged 1o ry to correct the interference by one or more of the
following measures:
- Reorient o elocute the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet ona circuit different from that to which the receiver s connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules, Operation s subject o the following two conditions (1this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
California Proposition 65
WARNING: Risk of Cancer from [Name of one or more chemicals known to
cause cancer] And Reproductive Harm From [Name of one or more chemicals known
to cause reproductive toxicity] Exposure –
www.P6SWarnings.ca.gov.
BATTERY SAFETY GUIDELINES
DO NOT replace the battery with a different model,
DO NOT use this product if the battery shows signs of damage including, but
not imited to tearing, deformation, leakage, or the smell of electrolytic
material.
DO NOT touch the battery i material s leaking and seek immediate medical
attention if any material comes into contact with your skin or eyes.
DO NOT expose the battery to liquid, heat sources, electricity (outside of the
product itself), or other non-standard operating condition,
DONOT remove the battery except for proper disposal and recycling as required
by local laws and regulations.
DONOT impact, bend, alter, dissemble, or otherwise damage the battery as the
contents are volatile, hazardous, and can be harmful.
CAUTION Failing to follow all safety guidelines may result product damage, explosion, fire, and/or electric shock.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.