REDRAGON JAX Pro 63 Key RGB Wireless Mechanical Keyboard Instruction Manual

Dear user

Thank you for choosing    product. To protect your rights and for better customer service, please read the following warranty rules carefully.

1. Within 18 months of purchase date , repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
2. Consumable parts (such as foot pads) and spare parts replacement are not included in our warranty.

OS support

Windows XP/Vista/Win7/Win8/Win10

How to connect the keyboard with a computer Wired Connection

1. Slide the 2.4G/OFF/BT switch on bottom of keyboard to OFF.
2. Take out the USB A to USB Type C cable in the package and connect the keyboard with your computer.
3. The computer will recognize and configure the keyboard automatically.
4. The keyboard will be ready for use when the configuration is finished.
5. Once the keyboard is powered up, charging begins. The LED marked with M light s flashes in white then turns to red. It will turn white when keyboard is fully recharged.

2.4G Wireless Connection

1. Slide the 2.4G/OFF/BT switch on bottom of keyboard to 2.4G.
2. Take out the nano USB receiver and plug it into an available USB port on your computer. The computer will recognize and configure the keyboard automatically.
3. The keyboard will be ready for use when the configuration is finished.4. In some cases, you may need to pair the keyboard. Turn on the keyboard and press [FN]+[2.4G] for about 3 seconds, the LED marked with M flashes in green, plug the USB receiver into any available USB port on your computer within 20 seconds. The keyboard will be paired automatically. Make sure the keyboard has enough power before doing so.
4. The indicator will flash when the battery is low. Please recharge the keyboard in time or it will turn off automatically soon.

Bluetooth Connection

1. Slide the 2.4G/OFF/BT switch on the bottom of keyboard to BT.
2. Press [Fn]+[BT1](or [BT2]/[BT3] for other Bluetooth devices), the LED marked with M flashes in blue (or cyan/magenta for the others)
3. Turn on Bluetooth and scan for available devices on your computer or smartphone. It will find “BT3.0KB or BT5.0 KB” device. Select it and it will connect automatically.

Function Introduction

1. With standard USB and 2.4G/BT connections, the keyboard can be used on computers without any software or driver installation.
2. There are 20 backlight effects: FN+”|” key(marked M on the key)
3. Commands of key combinations with [FN] key [

FN+ESC]: ~
[FN+1):F1

[FN] + [Win]: Disable or enable the [Win] key.
[FN] + [Q]: Select Bluetooth device one (for Bluetooth connection).
[FN] + [W]: Select Bluetooth device two (for Bluetooth connection).
[FN] + [E]: Select Bluetooth device three (for Bluetooth connection).
[FN] + [R]: Change to 2.4G wireless connection. Press and hold the [FN]+[4] for 3| seconds to pair the keyboard with its receiver.

FN+P=PRTSC

FN+{[=HOME

FN+]}=END

FN+;:=PGUP

FN+”=PGDN

FN+.>=INSERT

FN+/?=DELETE

FN+ space : Turn On or Off the backlight.

FN + CapsLK : Set the keyboard to default setting.

FN+Enter: Change backlight color.

FN+ t/|: Decrease/increase the backlight brightness,total 5 levels.

FN+ </—: Change light running speed, total 5 levels.

---|---

How to set the backlighting

Press FN+Backspace to get start setting, AWSD keys default in green color in the moment, Press FN+Backspace again, CapsLK is flash in Red in the moment, press desired key for color setting, the single key color is Red/green/blue/yellow/purple/Cyan/white/OFF by each click, fix the color you want, press FN+Backspace again to save setting, press FN+Backspace to quit the setting mode.

How to charge keyboard

Find the USB A to USB type C  cable in the packaging, plug the keyboard and connect it with a computer for charging, the LED indicator of the keyboard will turn red. Remark: The LED indicator will turn to red when the keyboard is out of battery.

Indicators on keyboard right part

“A” is for Captals lock indication “M” is for connection mode indication

FAQ

1.  If the keyboard doesn’t respond, please check if the keyboard’s USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
2. If you spill liquid on the keyboard, please remove keyboard’s USB cable from the computer immediately. Wipe up excess liquid and put the keyboard in a warm place (for instance, under a lamp) to let the keyboard dry naturally before using again.]\

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

California Proposition 65

WARNING: Risk of Cancer from [Name of one or more chemicals known to cause cancer] And Reproductive Harm From [Name of one or more chemicals known to cause reproductive toxicity] Exposure – www.P65Warnings.ca.gov
JAX  PRO
63 KEY RGB WIRELESS MECHANICAL KEYBOARD

http://qr24.cn/FmPz2I

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>