WYZECP2 Wi-Fi Indoor Smart Camera User Guide

WYZECP2 Wi-Fi Indoor Smart Camera

IN THE BOX

• Wyze Cam Pan × 1
• USB Cable × 1
• Power Adapter × 1
• Quick Start Guide × 1

1. Lens
2. Status Light
3. Light Sensor
4. Power Input
5. MicroSD Slot (SD card not included)
6. SETUP Button
7. Microphone

SETUP

1. Download the Wyze app and create an account.
2. Connect the camera to a power outlet and wait for 15 seconds until the red status light flashes.
3. Press the SETUP button for 3 seconds until you hear a voice prompt.
4. Follow the Wyze app to finish setup.

LIGHT INDICATORS DURING INSTALLATION

• Solid red light
  The device is powered on and initializing

• Flashing red light
  The device is ready to connect

• Flashing red and blue lights
  Connection is in progress

• Flashing blue light
  The device is connected and finishing setup

• Solid blue light
  The device is working properly

LIGHT INDICATORS AFTER SETUP

• Solid red light
  Live stream is being viewed or a recording is in progress

• Quickly flashing red light
  Siren is in use

• Solid blue light
  The device is working properly and no operations are running (edited)

FCC WARNING

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC RSS WARNING

This device complies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC RADIATION EXPOSURE STATEMENT:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Only use the power supply provided.

NEED HELP?
Contact our support team: https://support.wyze.com
Join our Community: https://wyze.com/community

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>