Wyze WLCKG1 Lock WiFi & Bluetooth Enabled Smart Door Lock User Guide
- June 3, 2024
- Wyze
Table of Contents
Wyze WLCKG1 Lock WiFi & Bluetooth Enabled Smart Door Lock
Specifications
- ITEM WEIGHT: 1.22 pounds
- PRODUCT DIMENSIONS: 2.5 x 2 x 4.9 inches
- LOCK TYPE: smart lock, Keypad
- MATERIAL: Metal
- STYLE: Smart Lock
- FINISH TYPE: Polished
- CONTROL METHOD: Voice
- BATTERIES: 4 AA batteries
- POWER SOURCE: Corded Electric
- FINISH: Polished
- BRAND: WYZE
Introduction
Wyze was founded with the intention of making excellent technology available to everyone. We began in 2017 by launching Wyze Cam, a smart home camera with all the features users demand at a fraction of the cost of competing cameras, from our Kirkland, Washington, office. Wyze Cam is currently the best-selling camera on the entire, demonstrating that people adore amazing technology that is accessible to everyone. Since then, we’ve continued to follow this idea and released other smart home products, such as Wyze Bulb, Wyze Sense, Wyze Plug, and Wyze Lock. Our most recent piece of smart home magic is Wyze Lock.
This smart lock accomplishes your expectations and provides all the functionality you could ever want in a smart lock. You may remotely operate it with your phone to let the dog walker in or make sure it locks after you’ve hurriedly departed for your holiday. This bad boy is capable of more than that. Wyze Lock recognises when you get home and opens the door as you get close. Once you are inside, Wyze Lock’s integrated gyroscope senses when the door is closed and locks itself behind you. All of that and more are present. Like we said, everything the technology you require is now available at a cost you can bear.
WELCOME
Congrats on your new Wyze Lock!
Installation will take roughly 15 minutes and will require a Phillips screw driver (not included).
Nowlet’s get started!
IN THE BOX
- Wyze Lock x1
- Wyze Lock Gateway x1
- Quick Start Guide x1
- AA Batteries x4
- Adhesive Strip x1
- Mounting Plate x1
- Adapter x3
Lock-front
Front plate on
Lock-front
Front plate off
Lock Back
- Indicator Light
- Front Plate
- Knob
- Pair Button
- Battery Latch
- Adapter
- Mounting Plate
- Setup Button
- Indicator Light
Overview
Wyze lockmakes your existing deadbolt smart by replacing the interior thumb latch. it does not alter the exterior lock.
SETUP
-
Download the Wyze app
Log in or create a Wyze account -
Set up the Lock Gateway
Plug the Lock Gateway into an outlet near your door (within 50 feet). In the Wyze app, tap the 3 dots on the top right corner of the Home Page. Select Add a Product and then “Wyze Lock Gateway”. Follow the instructions in the app to complete setup.
- Install and set up the Lock
After setting up the Gateway, continue following the in-app installation and setup instructions to complete Lock set up.
LIGHT INDICATION
Lock
Flashing Green Light
The Lock is ready to connect
Flashing Green/Red Light
The Lock is updating its firmware
Solid Red Light
The Lock failed to lockor unlock
Solid Green Light
The Lock successfully locked or unlocked
Lock Gateway
Solid Green Light
The Gateway is working properly
Flashing Red Light
The Gateway failed to connect to WiFi
Flashing Green Light
The Gateway is ready to connect
Flashing Blue Light
The Gateway is ready to pair to a lock.
TROUBLESHOOTING
My Gateway will not connect to the network
Ensure your router has the 2.4GHz band enabled as the Wyze Lock Gateway cannot connect to 5GHz networks. If problems persist, tryy moving the Gateway closer to your router.
I can’t get the Gateway and Lock to pair
Make sure the Lock Gateway’s indicator light is flashing blue/red showing it is in pairing mode. If problems persist, move the Wyze Lock Gateway closer to the Locker remove obstacles that may inhibit the signal.
My Lock is getting jammed
Remove the Wyze Lock from the mounting plate and the loosen the screws attaching the mounting plate to the door. Ensure the mounting plateis properly aligned and that you’re using the correct adapter. Retighten the mounting plate’s screws (do not over tighten) and try manually locking the door. If problems persist, your deadbolt may be misaligned to the doorjamb requiring additional adjustments.
FCC Part 15 Compliance
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the product.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- and (2) this device must accept any interference received, including interference that may cause undesired operation.
ISED Regulatory Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Frequently Asked Questions
Is a hard connection between the Gateway and the WiFi router necessary?
Unlike what the other individual said, the gateway uses ZigBee rather than Bluetooth. The lock and the gateway can be up to 50 feet apart and still function. No, the router and gateway are not hardwired together.
Does the unlock process require the wyze app to be open?
To unlock the door, you don’t need to have the app or phone open. The app does offer a feature to unlock it. You may unlock via the app while in the car, for instance, if it’s pouring.
Can a multi-point lock system be used with it?
I am unsure of what you mean exactly. However, this device can only open one deadbolt lock.
How does the front look?
The front of the door seems just as it does right now; nothing has changed.
Please confirm if the Smart Life app is compatible?
No, the Smart Life app is not compatible with it. Only the Wyze app is compatible with all Wyze devices.
Does each lock require its own gateway, or can numerous locks be used with one?
Per gateway, you can have up to 10 locks. Currently, I have 2 locks on a single gateway. Much superior to the setup from August.
Can the knob be taken off?
The door handle doesn’t need to be taken off.
What number of codes can the lock hold?
The Wyze keypad can keep up to 50 codes in memory.
Can this be applied to a gate outside?
You would need to shield it from the rain because it is not waterproof. Having said that, I did so, and it is now attached to a gate outside. It’s been OK for me thus far (installed early november)
Will my Echo 10 be able to use this?
I have no idea what an echo 10 is. It will work with the Echo Show 10 if you mean by that.