WYZE WTMSRS 3-in-1 Digital Room Sensor for Smart Thermostat User Manual
- June 3, 2024
- Wyze
Table of Contents
WYZE WTMSRS 3-in-1 Digital Room Sensor for Smart Thermostat
WELCOME TO WYZE
Hi! Thanks for getting your hands on a Wyze Room Sensor, and if this is your
first Wyze product, welcome to the Wyze fomily!
You just made a commitment to a better, more connected lifestyle. This guide
will help you get things set up.
Please read this guide carefully before setting up the device, and keep it in
a safe place for future reference.
WARRANTY
Your Wyre product is covered by a one-year limited warranty.
You can view the limited warranty terms at https://wyze.com/return-warranty-
policy or request a copy by contacting Wyze at + 1 [206) 339-9646.
- Wyze Room Sensor is not weatherproof.
- Wyze Room Sensor is not IP rated and is not intended for outdoor use.
- If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
- Do not operate in conditions above 90% humidity, as this can cause condensation/icing/fog and result in damage.
FCC WARNING
Any changes ar modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and {2) This device must accept any interference received, including
interference that may cause undesired operation. This equipment has been
tested and found to comply with the limits for a Closs B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or on experienced radio/TV technician for help.
IN THE BOX
- Wyze Room Sensor x 1
- Base 1Cl
- Adhesive Pad x 1
- AAA Alkaline Battery x 2
- Quick Start Guide x 1
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
ISEDC RADIATION EXPOSURE STATEMENT
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with minimum distance of 20 cm between the
radiator and your body. Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
COMBINATIONSauthority to operate the equipment,
DISPLAY SCREEN GUIDE
COMBINATIONS
SETUP
-
Insert the included batteries into the sensor’s battery compartment.
-
Download the Wyze opp, and sign in to your Wyze account. Top on your Wyze Thermostat in the app, then tap the pill icon ot the top.
-
Top the N+n plus icon to odd your sensor.
Follow the in-app instructions to finish set up. -
Mount the room sensor at least 5 feet above the ground. To prevent signal shielding, do not mount the sensor on or near metallic surfaces. Toke core to not block the PIR Motion Sensor.
-
You’re all set! Check out your new room sensor’s features in the Wyz.e opp.
COMFORT LEVEL
Low Battery Alert
Replace the battery when the battery level is low. The battery level is
displayed at the top of the sensor’s display.
Reset/Connectivity Button
Single Press
To set up the sensor. Press and Hold To reset the sensor, press and hold the
reset button for 5 seconds .
RESTRICTIONS
- Do not ingest battery. Chemical Burn Hazard. This product contains batteries. If a battery is swallowed, it con cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery comportment does not close securely, stop using the product and keep it away from children. If you think a battery might have been swallowed or placed inside any port of the body, seek immediate medical attention.
- Risk of explosion if the battery is replaced by an incorrect type.
- Do not place the sensor in direct sunlight.
Wyze and Wyze Room Sensor are trademarks of Wyze Labs, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>