WYZE B09L8DJ2L6 Camera Smart Scale User Guide

: June 5, 2024
: Wyze

WYZE B09L8DJ2L6 Camera Smart Scale

Read this manual carefully and save it for future reference.

Disclaimer: The products, accessories, user interfaces, etc. illustrated in this guide are intended for reference only.
Due to product updates, the actual product and the illustrations in this guide may vary.

WELCOME TO WYZE

Hi! Thanks for getting your hands on a Wyze Scale S, and if this is your first Wyze product, welcome to the Wyze family! You just made a commitment to a better, more connected lifestyle. This guide will help you get things set up.

IN THE BOX

Wyze Scale S × 1
1.5V AAA Batteries × 3
Quick Start Guide × 1

TIPS

SETUP

Before first use, remove the plastic strip from the battery compartment
Note: When inserting the batteries, line up the positive and negative signs to make sure the batteries are installed correctly.
Download the Wyze app and sign in or create an account.
|
---|---
In the Wyze app, tap the + plus sign, then Add Device > Lifestyle > Wyze Scale S. Follow the instructions in the Wyze app to complete setup.
To connect, enable your phone’s Bluetooth and tap on the scale’s surface to activate it.
After the connection is established, place the scale on a hard, flat surface and step onto the scale with bare feet to begin the measurement.
Make sure your feet are touching the 4 electrodes for the most accurate measurements.

UNITS AND FACTORY RESET

On the back of your Wyze Scale S, you will find the UNIT/RESET button. Press it to change the units from lb to kg. Press and hold the button for 3 seconds until the LED display shows “Clr” to reset the scale.

NOTES

You can share Wyze Scale S with other family Qmembers by following the sharing instructions inside the Wyze app.
Your scale may need to be calibrated to show accurate weight measurements. Place the scale on a hard, flat surface and re-calibrate it (step on and then step off, allowing the scale to return to “0.0 lb”).
If you work out more than 10 hours a week and have a resting heart rate below 60 bpm, you may need to use Athlete Mode.
Make sure your age, sex, and height entered during the setup process are correct to get the most accurate results.
Open the Wyze app and connect to your Wyze Scale S before taking measurements to ensure the data is recorded on the correct profile.
If your Wyze Scale S is shared by users with similar weights, make sure the scale is connected to the Wyze app of the user taking the measurement or data may not be recorded on the correct profile.
People that are under 18 or over 65 years of age, that are pregnant, that have osteoporosis or very low bone density, that have edema, or that have artificial dialysis should use Wyze Scale S only as a reference as the body fat measurement could be inaccurate due to deviations from standard averages.

LED DISPLAY

Suspected error. Please clean the scale with a damp cloth if needed, then step on the scale again with bare feet.
The batteries are low.
Please replace the batteries.

| Suspected error. Please clean the scale with a damp cloth if needed, then step on the scale again with bare feet.
---|---
| The batteries are low.
Please replace the batteries.
| Critical low battery. Please replace the batteries. LED display will remain o after “Lo” is displayed 3 times.
| Weight not in supported range. Please measure again.

EXPLANATION OF SYMBOLS ON UNIT

| Warning
---|---
| Please recycle where facilities exist. Waste electrical products should not be disposed of with household waste. Check with your local authority or retailer for recyling advice

CAUTION

Never use this product in combination with medical electronic devices such as:
(1) Medical electronic implants such as pacemakers.
(2) Electronic life support systems such as artificial heart/lungs.
(3) Portable electronic medical devices such as electrocardiographs.
Pregnant women should consult their healthcare provider before use. Some physical conditions could affect hydration levels that may lead to inaccurate results. Please consult your healthcare provider for more information.

GENERAL SAFETY & PRECAUTIONS

Do not stand on the edge of scale, as you may fall over or influence the accuracy of the measurement.
Do not use the scale on a tiled or wet floor, as this may result in a fall.
Make sure the surface of the scale is clean before you step onto it, to prevent any slippage.
Treat your scale with care. Do not drop it or jump on it. The scale is designed to be stood on; misuse or abuse may break the electronic sensors, cause injury, or result in inaccurate measurements.
Avoid using this scale near strong magnetic fileds, such as microwave ovens, etc.
This device complies with part 15 of the FCC Rules.
Its operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Charges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference.
(2)This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Bluetooth® associated logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Wyze Labs Inc. is permitted under license. Other trademarks and trade names are those of their respective owners.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the quipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CARE & MAINTENANCE

Avoid high temperatures and irradiation.
If the scale is stored close to freezing point, allow it to acclimate to room temperature before use.
Remove the batteries if the scale is not going to be used for 3 months or more.
Clean the scale with a soft damp cloth.
Do not use abrasive or solvent-based cleaners, and never immerse it in water.
The scale will maintain its safety and performance features for at least 10,000 measurements.

WARRANTY INFORMATION

Your Wyze product is covered by a one-year limited warranty. You can view the limited warranty terms at https://wyze.com/return-warranty-policy or request a copy by contacting Wyze at +1 206-339-9646

FCC WARNING

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED RADIATION EXPOSURE STATEMENT

This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISED RSS WARNING

This device complies with ISED licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference,and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Apple logo and App Store are trademarks of Apple Inc., registered in the U.S. and other countries and regions.
Google Assistant, Google Home, Google Play, and the Google Play logo are trademarks of Google LLC.

Wyze and Wyze Scale S
are trademarks of Wyze Labs, Inc.

SPECIFICATIONS

Product Name: Wyze Scale S Black
Model: WSCALS
Product Size: 278 mm x 278 mm x 26 mm
Product Weight: 4.07 lbs / 1.85 kg
Power: 3 x 1.5V AAA batteries (included)
Display Units: lb/kg
Measurement Range: Weight: 11 – 400 lbs / 5 – 180 kg
Operating Temperature: 41°F – 104°F (5°C – 40°C)
Operating Humidity: 20 – 85% RH
Storage and Transport Humidity: ≤90% RH
Storage and Transport Temperature: -4°F – 131°F (-20°C – 55°C)