Monoprice 44434 Blackbird 8K60 2×1 HDMI Switch Quick Start Guide
- June 12, 2024
- Monoprice
Table of Contents
Monoprice 44434 Blackbird 8K60 2×1 HDMI Switch
Thank you for purchasing this product
To ensure optimum performance and safety, read the following instructions before connecting, operating, or adjusting the product. Keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may have been damaged by electrical spikes, surges, electric shocks, lightning strikes, etc. The use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Introduction
The BK2x1 HDMI 21 switcher can switch any 2 HOMI sources into 1 HDMI display. Video resolution is supported up to 8K@60Hz 4:4:4, 48Gbps video bandwidth, making it suitable for outdoor display, video conference, security monitoring, home theater, and other applications. Use the HDMI BK switcher to connect from HDMI IN1 and HDMI IN 2 ports to two HDMI source devices via an individual cable before connecting from the HDMI OUT port to an external monitor (such as an HDMI projector, HDMI TV, or HDMI ordinary display). Switch between two sources by pressing the switch button on the top panel of the switcher. In order to make sure that your display shows normally, it is highly suggested to plug the Micro USB cable into the USB device to power the switcher. Always remember that the switcher is not a bi-directional switcher. It can only be used from two sources to one display (only 2 in1 out, not in 2 out). The device works well with Xbox or PlayStation, achieving 4K@120hz on your televisions or relative monitors.
Features
- HDMI 21 and HDCP 23 compliant
- 48Gbps video bandwidth
- 8K@60Hz 4:4:4 8/10/12bit, 8K@60Hz 4:2:012-bit, 8K@30Hz 4:4:410-bit, and 4K@120Hz 4:4:410-bit video support
- HOR, HDR10, HDR10+, Dolby Vision, and HLG pass-through
- VRR, FVA, and ALLM
- HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio 2×1 switch output, auto-switch supported
- Built-in Equalizer and Driver
- Auto EDID management
- Compact design for easy and flexible installation
Package Contents
- 1 x BK Two-Input HOMI Switcher
- 1 x Micro use Power Cable
- 1 x User Manual
Operation Controls and Functions
Switch button
/Power LED
| Short pressing the switch button will allow the
device to switch any of the two HDMI input signals to the HDMI display; long press this button to enter the auto-switching mode.
When the device is powered on, the green power LED is on.
---|---
Input LED
(1-2)
| hen the HDMI INl/2 port is selected as the input
source channel, the corresponding green LED is on.
HDMI INl/2 port| HDMI signal input ports, connect to HOMJ source
devices such as DVD or PSS with a HOMI cable.
POWER| DC SV USB power input port.
HOMI OUT port| HDMI signal output port connects to the HDMI
display device such as televisions or monitors with an HDMI cable.
Notes:
- While using the HDMI switcher, a power supply via the Micro USB cable is not necessary, but in case some of your HDMI devices have insufficient power, please connect the Micro USB cable to your USB devices for power supply.
- If you need to use the switcher to output signals of 4K@120Hz or 8K@60Hz, please make sure that your HDMI cable, HDMI signal source, and HDMI display all support the resolution above.
- The length of the HDMI cables connected to both ends of the switcher should not be too long in order to prevent a flickering screen. The following HDMI cables are suggested:
- 8K60, 8K30, 4K120: Ultra HDMl21 cable, IN/OUT 2 meters.
- 4K60 4:4:4: HDMl20 cable, IN/OUT 3 meters.
- 4K60 4:2:0, 4K30, 1080P: HDMI cable, IN/OUT 5 meters.
Application Example
Specifications
| HDMI Compliance | HDMI 2.1 |
|---|---|
| HDCP Compliance | HDCP 2.3 |
| Video Bandwidth | 48Gbps |
| Video Resolution | Up to 8K@6CM-lz 4:4:4 8/10/12bit, 8K@6Cl-lz 4:2:012-bit, |
8K@30Hz 4:4:410-bit, 4K@120Hz 4:4:410-bit
Color Depth| 8-bit,10-bit,12-bit
Color Space| RGB, YCbCr 4:4:4 / 4:2:2 / 4:2:0
HDMI Audio
Formats
| LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,
DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
Input Connection
Input| 2><HDMI IN [Type A,19-pin female]
Output| l><HDMI OUT [Type A,19-pin female)
Mechanical
Housing| Plastic Enclosure
Silkscreen Color| Black
Dimensions| 60mm (W) “60mm (D) “12mm (H)
Weight| 31g
Power Supply| USBSV
Power
Consumption
| 1.25W(Max)
Operation
Temperature
| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F – 140°F
Relative Humidity| 20-90% RH (non-condensing)
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to note. If you have any problems with your order, please give us an opportunity to make it right You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com Check the website for support times and links.
TECHNICAL SUPPORT
Monoprice™ is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com or through email by sending a message to tech@monoprlce.com. Check the website for support times and links. To download the latest drivers, firmware, manuals, etc., go to www.monoprice.com and type 44434 into the search bar. If available, support files are linked at the bottom of the product page.
REGULA TORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements of Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Notice for ISED Canada
This Class B digital apparatus complies with Canadian ICES-003. The terms HDMI
and HDMIHigh-DefinitionMultimedia interface, and the HDMI logo;re tradefTliTks
or registered trademarks of HDMI licensing LLC in the United States and other
countries.
Monoprke'”‘ and al/Monoprice bgos ;re trader;rksof Monoprke Inc
FREQUENTLY ASKED QUESTIONS
What is the Monoprice 44434 Blackbird 8K60 2x1 HDMI Switch?
The Monoprice 44434 Blackbird is an 8K60 2x1 HDMI switch, which allows you to connect up to two HDMI sources and switch between them to display on a single HDMI output.
What resolution does the Blackbird 8K60 HDMI switch support?
The Blackbird 8K60 switch supports resolutions up to 8K Ultra HD (7680x4320) at 60Hz.
How many HDMI inputs does the Blackbird 8K60 switch have?
The Blackbird 8K60 switch has two HDMI inputs, allowing you to connect up to two devices, such as gaming consoles, 8K media players, or compatible 8K devices.
What is the purpose of an HDMI switch?
An HDMI switch allows you to connect multiple HDMI devices to a single HDMI port on a TV or monitor and switch between them without having to physically swap cables.
Does the Blackbird 8K60 HDMI switch support HDR (High Dynamic Range)?
Yes, the Blackbird 8K60 switch supports HDR content for a more vibrant and lifelike viewing experience.
How do you switch between different HDMI inputs on the Blackbird 8K60 switch?
The Blackbird 8K60 switch typically comes with a remote control or has a button on the device itself to toggle between the HDMI inputs.
Can the Blackbird 8K60 HDMI switch automatically detect the active HDMI input?
Yes, many HDMI switches, including the Blackbird 8K60, have auto-switching capabilities that detect and display the active input automatically.
What audio formats does the Blackbird 8K60 switch support?
The Blackbird 8K60 switch supports various audio formats, including Dolby TrueHD, DTS-HD Master Audio, and LPCM 7.1.
Is the Blackbird 8K60 HDMI switch compatible with gaming consoles like PlayStation and Xbox?
Yes, the Blackbird 8K60 switch is compatible with gaming consoles, making it convenient to switch between gaming devices on a single display.
Can I use the Blackbird 8K60 HDMI switch with my home theater system?
Yes, the Blackbird 8K60 switch can be integrated into a home theater setup to switch between different HDMI sources like Blu-ray players and media players.
Does the Blackbird 8K60 HDMI switch require an external power source?
Yes, the Blackbird 8K60 switch typically requires an external power adapter to operate properly.
Is the Blackbird 8K60 HDMI switch HDCP (High-bandwidth Digital Content Protection) compliant?
Yes, the Blackbird 8K60 switch is HDCP compliant, ensuring it can handle protected content from devices like Blu-ray players and streaming services.
Can the Blackbird 8K60 HDMI switch be used with older HDMI devices that support lower resolutions?
Yes, the Blackbird 8K60 switch is backward compatible with older HDMI devices that support lower resolutions.
What is the maximum cable length supported by the Blackbird 8K60 HDMI switch?
The maximum cable length can vary based on the quality of HDMI cables used, but generally, it supports standard HDMI cable lengths (up to 15 meters).
Does the Blackbird 8K60 HDMI switch come with HDMI cables included?
The package contents may vary, but the Blackbird 8K60 switch typically does not come with HDMI cables included.
DOWNLOAD THE PDF LINK:Monoprice 44434 Blackbird 8K60 2×1 HDMI Switch Quick Start Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>