Yi Technology YHS6021 YI Dome U Camera Pro User Guide

Yi Technology YHS6021 YI Dome U Camera Pro User Guide

What’s in the box

Getting to Know Your Camera

Pairing your Camera

a) Prerequisite

• Ensure that your cell phone is connected to a 2.4 GHz Wi-Fi network.
• Download the YI Home App from the Apple App Store or Google Play.
• Register a YI Home account or log on to an existing YI account.

b) Installation:

Step 1
Connect the power adapter to an outlet to activate the camera. The camera indicator will flash yellow and you will hear the introductory message “Welcome to YI home”, followed by “Waiting to connect”. When you hear “waiting to connect”, tap “I heard waiting to connect”.
Note: To install a camera that is previously installed on a different network or if you change your password, you must reset your camera. Press the reset button that is located at the bottom of the camera.

Step 2
Log into the YI Home App, you can tap the “+” sign to select your device or scan the camera QR code with your phone.

Step 3
Enter the password of the same Wi-Fi network that is connected to your phone, then use the YI Dome U Camera Pro to scan the QR code that will be generated.

Step 4
Tap “Next Step”. You will hear “Pairing is successful” and then the YI Dome U Camera Pro is ready to use.

c) Pan/Tilt/Zoom (PTZ) Angle

Range of Activity:
Pan 0° – 350°, tilt up 53°, tilt down 10°.

Zoom
Directly from the livefeed on your YI Home App

Mounting Your Camera (optional)

Prerequisite:

• Ensure that the camera is facing the desired direction prior to mounting.
• Ensure that the included USB cable can reach the desired mounting location.

Secure the mount with screws

Step 1
Use the included screws to install the camera mount on a flat ceiling.

Step 2
Install the camera by twisting and locking it into the mount base.

Switching Wi-Fi Networks

When you need to switch Wi-Fi networks or update your Wi-Fi password, follow the instructions below:

1. Restore your camera to its default settings by inserting a paper clip or reset pin into the camera’s Reset Port.
2. Open the YI Home app on your phone, and connect the camera to your phone again. Your videos stored on your MicroSD card will not be affected.

Important Safety Guidelines

1. Read these instructions carefully.
2. Clean only with a dry cloth.
3. This camera is for indoor use only.
4. Only use the attachments/ accessories specified by the manufacturer.
5. Unplug this apparatus during lightning storms or when unused for long periods of time.
6. To get the best usage out of this product, please consistently update to the latest versions of our app and firmware.
7. Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.

Go to: https://www.yitechnology.com/firmware/

Specifications

• Maximum Resolution: 2304 x 1296
• Lens: Wide-Angle
• Audio: Built-in Mic and Speaker
• Photographic Enhancement: 3D Digital Noise Reduction
• Wi-Fi: 802. 11b/g/n, 2.4 G Hz
• Alert Modes: Human Detection, Motion Detection, Face Detection
• Night Vision: IR Cut+ Non-invasive Infrared LEDs
• Support Platforms: Android, iOS, Mac & PC
• Wireless Encryption: WEP/WPA/WPA2
• USB Cable Length: 2 Meters
• Power Supply: DC 5V/1A
• Power Consumption: 3.5W
• Pan/Tilt: 350° horizontally, tilt up 53°, tilt down 10°.
• Storage: MicroSD Card and YI Cloud Storage
• Operating Temperature: 14°F to 122°F (-10°C to 50°C)

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The distance between user and products should be no less than 20cm

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However , there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver .
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

IC WARNING

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device

The distance between user and products should be no less than 20cm

Radio apparatus containing digital circuitry which can function separately from the operation of a transmitter or an associated transmitter, shall comply with ICES-003. In such cases, the labelling requirements of the applicable RSS apply, rather than the labelling requirements in ICES-003. This Class B digital apparatus complies with Canadian ICES-003.

CE

Herebywe: Shanghai Xiaoyi Technology Co., Ltd., declares that the radio equipment: YHS.6021 is in compliance with Directive 2014/53/EU.
Product Type: YHS.6021
Wi-Fi: 2.4GHz ,802.11b/g/n
Max RF power: 17dBm
Manufacture: Shanghai Xiaoyi Technology Co., Ltd.
Address: Building 18, Lane 55, Chuanhe Road, China(Shanghai) Pilot Free Trade
Zone, Shanghai, China, 201203
The full text of the EU declaration of conformity is available at the following internet address: https://kamistore.eu/pages/product-certification
Operating Temperature for AC/DC Adapter is -10℃~40℃
Operating Temperature for Camera is -10℃~50℃

FCC ID: 2AFIB-YHS6021
IC: 20436-YHS6021

Manufacture: Shanghai Xiaoyi Technology Co.,Ltd.
Address: Building 18, Lane 55, Chuanhe Road, China(Shanghai) Pilot Free
Trade Zone, Shanghai, China, 201203

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>