WatchGuard Firebox T45-CW Wireless PoE User Guide

: June 12, 2024
: Watchguard

Table of Contents

Activate Your Firebox
Connect Your Firebox and Power It On
Connect to the Web UI
Declaration of Conformity
IMPORTANT NOTES
WATCHGUARD TECHNICAL SUPPORT
Documents / Resources

WatchGuard Firebox T45-CW Wireless PoE

WatchGuard Firebox T45-CW Wireless PoE

Activate Your Firebox

Go to www.watchguard.com/activate
Log in to your WatchGuard account, or create a new account.
If you create a new account, return to www.watchguard.com/activate after you finish the account creation process.

Connect Your Firebox and Power It On

Make sure your computer is configured to use DHCP. When you connect to the Firebox, it will assign an IP address on the 10.0.1.0/24 network.
Connect Your Firebox and Power It On

Connect to the Web UI

Go to https://10.0.1.1:8080
You can safely ignore certificate warnings, because the Firebox uses a self- signed certificate.
Log in with the user name admin and the passphrase read write.
Follow the directions in the Web Setup Wizard to configure your Firebox.
Install the Firebox in your network.

For more information, go to www.watchguard.com/start

Declaration of Conformity

Declaration of Conformity
A full list of safety approvals, global compliance standards, and certifications can be found in the Hardware Guide for this device located on the WatchGuard website: https://www.watchguard.com/wgrd-help/documentation /hardware-guides

IMPORTANT NOTES

CE Notice:
The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU).

Europe – EU Declaration of Conformity (Wireless)
This device complies with the essential requirements of the RED 2014/53/EU.
This device is a 5GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in these countries:

AT

| BE| BG| CH| CY| CZ

DE

| DK| EE| EL| ES|

Fl

FR| HR| HU| IE| IS|

IT

LI

| LT| LU| LV| MT| NL

NO

| PL| PT| RO| SE|

SI

SK| TR| UK(NI)| | |

Maximum Output Power:
2412-2472 MHz – 19.95 dBm
5180-5240 MHz – 22.90 dBm

This device has software that cannot affect compliance with the Radio Equipment Directive (RED) 2014/53/EU, even if the software is changed or replaced.

In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.

This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.

To see additional certification information and languages, go to watchguard.com/start

WATCHGUARD TECHNICAL SUPPORT

1.877.232.3531
(U.S. and Canada)
+1.206.613.0456
(all other countries)
WATCHGUARD TECHNICAL SUPPORT
ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104
U.S. SALES: 1.800.734.9905 • INTERNATIONAL SALES: +1.206.613.0895
WEB:www.watchguard.com

©2023 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Firmware, and Live Security are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries. All other trademarks and tradenames are the property of their respective owners. P.N. 352-45CW-001 Rev B 053023
watchguard.com/start