Shenzhen Yi Pin Cheng Technology P40 Visual WiFi Ear Endoscope User Manual
- June 6, 2024
- Shenzhen Yi Pin Cheng Technology
Table of Contents
- Shenzhen Yi Pin Cheng Technology P40 Visual WiFi Ear Endoscope
- FCC Statement
- Steps to use on the phone
- Step 1:Download “Suear” App
- Step 2: Connection steps
- Interface introduction
- Ear pick accessories
- Troubleshooting
- Product Parameter
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shenzhen Yi Pin Cheng Technology P40 Visual WiFi Ear Endoscope
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Steps to use on the phone
Step 1:Download “Suear” App
For IOS :
Download and install the App“Suear”from App Store.
For Android :
Download and install the App“Suear”from Google Play Store.
Optional :
Scan the QR Code below to download the App.
Compatible Device
Android 4.4, iOS 9.0, and higher versions. Android system phones like Samsung
S7, Galaxy S6 edge, Note 8, S8, S8+, S9+, S10, Google Pix-el,XL, Pixel 3,
nexus 6p, Huawei Mate9, Mate 10, Mate 20 Pro, OnePlus etc.
IOS system phone like iPhone 6, 6s, 7, 7+, 8, 8+, X, XR, etc.
Notice : This model can’t work for computer systems!
Step 2: Connection steps
- Long press the switch key to open the device, after 5 seconds, then step into the next operation.
- 2 Open the “Suear” App, click the “Go to connect icon”, follow the pop-up prompt and click to con-nect now to jump to the mobile WIFI setting inter-face.
- 3 Find “Suear-xxxx” on the WIFI setting interface and click to connect.
- 4 After the mobile phone displays “Suear-xxxx” WIFI is connected, return to the App again and click the house icon to enter the device.
After connecting to the product WIFI connection, you will be asked some
questions:
IOS: “Suear”would like to find and connect to devic-es on your local
network. Suggestion: Click “OK”
After connecting to the product WIFI connection, you will be asked some
questions:
IOS: “Suear”would like to find and connect to devic-es on your local
network.
Suggestion: Click “OK”After connecting to the product WIFI connection, you
will be asked some questions:
IOS: “Suear”would like to find and connect to devic-es on your local
network. Suggestion: Click “OK”
Interface introduction
Ear pick accessories
- You can choose a tip which should be wipe by wet tissue or alcohol pad before use, if need, you can replace at will You should be carefully or slowly go into your ear canal, then tracking it from APP to get the environment of ear canal
Troubleshooting
Problems | Suggestions |
---|---|
Cannot store photos or videos to your phone | Let Suear permit the authority of |
photos, media and files in your device
Camera is no response, camera doesn’t light up| Please charge the device
APP crashed| Please uninstall APP and scan the QR code to install
Live image does not show after launching the app
| 1. Make sure you connect the correct WIFI ID “Suear-XXXX”
2. The question: This WLAN network has no Internet access. Connect anyway?Please be sure to choose the “Connect” If you choose “CANCEL” at the first time, you need to forget network of the“Suear-XXXX” WIFI on your phone then connect with this WIFI again, continue to open the app, and choose ”CONNECT” of this question so that it can work properly
3. Enter your mobile device setting and allow the”Suear” app to access”W- LAN” or “WLAN & Cellular Data”
4. Close the App and open it again
5. Turn the mobile phone data on then off again
---|---
Ear endoscope’s red light on| Please charge the product
WIFI connection break| Please restart ear endoscope, open the app, connect to
WIFI
Product Parameter
Product Name
Viusal Ear endoscope
| Working Frequency
2.4Ghz
---|---
Network Standard
IEEE 802.11b/g/n
| Image Sensor
CMOS
Image Transmission Rate
30fps
| Battery Capacity
350mAh
Environment Temperature
10-50 ℃
| Charging Time
1.5h
Battery Life
About 90minutes
| Working Voltage
3.7V-4.2V
Input Parameter
5V 0.4A
| Lens Diameter
4.0mm
Rate Power
0.75W
| Pixel
5MP
Best Focal Length
1.5-2cm
| Charging port
USB2.0
Gravity Sensor
6 Axis
|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>