Shenzhen Xiao Lu Yi Go Network Technology XLY1 Kids Balance Bike User Manual
- June 5, 2024
- Shenzhen Xiao Lu Yi Go Network Technology
Table of Contents
Shenzhen Xiao Lu Yi Go Network Technology XLY1 Kids Balance Bike User
Manual
Main Parts of kid’s balance bike
Instruction of light and music
A. Turn — on mode
Press and ho ) for 1 second to power on.
**Lighting se lection:
**
a Short pre ) once to se le ct the light color.
b In the power — on state, press and hole ) for 2 seconds to select the
lighting mode.
Notes:
- The color types are divide d into seven colors: red, green, blue, yellow, purple, blue and white .
- Lighting mode s are divided into: f lowing water, a alternating, colorful, and collision.
Music selection
It will automatically enter the Bluetooth mode in the power — on state, and short press the ( ) key to enter the TO card.
Notes:
- In Bluetooth mode, you can play mo bile mu sic by connecting to the mobile phone.
- Built — in TO card, parents can download it according to their children’ s preference s. The down load method can be connected to the computer with a data cable and find the music they like.
Turn — off mode
Press and hold ( ) for S seconds to automatically enter the shutdown state, or the balance bike will a automatically shut down after being stationer y for 1O minute s.
Charging Mode
Connect the SV charger, the light is red during the z her glng process, and the light is Off when fully charged.
Kid’s Balance Bike Assembly Instruction
Open the carton and inspect all parts.
(It adopts 85% packaging, in order to facilitate the assembly and use of
customers, the assembly steps are minimized, and it only takes two steps to
assemble, you can enjoy riding fun.)
Install the handlebar
As shown in the picture, loosen the four screws on the handlebar stand and
insert them into the handlebar to adjust to the appropriate position, and then
tighten the four bolts with an M4 wrench.
Install the saddle
Open the seat tube quick release, insert the saddle into the seat tube of the
frame, adjust the riding height to make it suitable for the height of the
child, pay attention to the safety line of the saddle tube, do not expose it,
and fasten the seat tube quick release.
Riding
Please ride under the guidance of a parent.
Warning
- Be fore use, the guardian should read the instruction car eIully. If you do not Io11o w the inst ruction, it may affect the salet y o I children. The instruction should be kept permanently for future reference .
- Suit ab Ie for age (3- 5 ye ars o Id) .
- Max loading : 50KG.
- It is not a means of transport at ion, and it is not a11o wed to ride on the ro ad.
- We are a Hein net and protective gear when riding.
- Pleas e check the product I or damage be fore use .
- Be fore use, pleased confirm that the product is installed in a solid stat e. When replacing acce ssories, pleased use the origina1 accessories to ensure safety.
- Pleas e avoid children touching the ring and other moving p arts during riding. Pleas e adjust the saddle to a suit able height lore assail use.
- When using this product, please we are close — I it tieg cloth ug.
- Do not use this product on slopes and other dangerous lo cat ions.
- Use under adult supervision.
Maintenance
- After unpacking, packaging materials and protective materials must best ore d in the designate d garb age bin.
- Check whether the Fastening part s are tight before e ach use.
- If the inspection is not carried out , it may cause harm to the child.
- If the parts are not installed correctly, it will Cause danger
- Do not Overload
- Avoid using this product in humid, co Id, hot environment s.
- Avoid collision with other hard object s
- There is no need to pack the painted surface otherwise the surf ace will tarnish or peel.
- Use natural out to wipe the we laded part s to prevent rust.
Warranty Policy
1 year warranty
Warranty b as is: With p ro of of p urchase
Manufacturer: Shenzhen X iao lu Y undong Te c hnolo gy Co., Ltd.
Address : Hegumiao Industrial Zo ne, Ping xrang County, Xingtai City,
Hebei Province
Place of O rig in: Xingtai, Heb ei
Web site: www.xiaoluyundong.com
Phone : 0.3.19— 788.2.28.1
FCC Statements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio’ TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>