PROZIS Grippo Grip Strenght Tool User Manual

: June 6, 2024
: PROZIS

Grippo Grip Strenght Tool
User Manual

PROZIS Grippo Grip Strenght Tool - overview

Prozis is a registered trademark of PROZIS.COM, S.A.
Prozis reserves the right to adjust or modify the product or any of the associated documentation in order to ensure its suitability for use, at any time and without prior notice.
NOTE: The most recent version of this product’s user manual can be found at www.prozis.com/user-manuals

Legal compliance statement

Prozis will always be available for any additional explanation through our customer support communication channels, available at www.prozis.com/support
The packaging that protects the device against transport damage is made from non-polluting materials that can be disposed of via local recycle bins.

Safety warnings

DANGER! This symbol, when combined with the note Danger, means high risk.
Failure to observe this warning may lead to injury to life and limb.

DANGER FOR CHILDREN AND PEOPLE WITH DISABILITIES

This product is not intended for use by people (including children) with physical, sensory, or mental impairments or lacking experience and knowledge, unless when they are supervised or instructed in the safe use of the product, and understand the risks involved.
Children must not play with the device.
Packing materials are not toys. Children must not play with the packing materials. There is a suffocation risk.
Cleaning and maintenance must not be performed by children without supervision.
Keep the device out of the reach of children.

To prevent harm or damage from happening to users or others, make sure to comply with the following requirements.

Always consult your Physician/General Practitioner prior to performing any physical activity.
Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before using the equipment again.
Poor training techniques can lead to injuries. Use this equipment properly and warm up before working out.
This product is intended for personal use only. Do not use it for professional purposes.
Check the equipment for worn or damaged parts before and after each use. Do not use it if ir, or parts of it, are visibly damaged.

User manual
PACKAGE CONTENTS

1 × Prozis Grippo – Grip strength tool
2 × AG4 Alkaline button battery
1 × Quick guide

PRODUCT OVERVIEW (SEE PAGE 2)

Housing
Rotor
Silicone grip
Digital counter
Wrist strap

Maintenance and cleaning

Do not use aggressive or abrasive cleaning agents or materials such as scouring milk or steel wool. They can damage the equipment.
Protect your Grippo from water drops and water spray.
Use a clean, dry cloth for cleaning the equipment, and never use any corrosive liquids. Use a slightly damp cloth and a mild cleaning agent to remove any stubborn dirt.
Make sure moisture does not enter the product while cleaning to prevent damage to the product and related repairs.

Storage

When no longer using the product, store it in a dry environment, protected from dust and direct sunlight.
Store your equipment inside the original case provided.

INSTRUCTIONS

How to use
Operating instructions:

Digital counter functions:

PROZIS Grippo Grip Strenght Tool - Digital counter
functions

Remove the battery insulation sheet and switch on the digital counter by pressing the ON/CLR button.
Press the FCN button to reveal the total revolution mode on the display. This mode calculates the accumulated revolutions during a session and records every 100 rotations as one unit.
3. Press the FCN button for the second time to see the current revolution mode on the display. This setting allows real-time monitoring of the rotor’s RPM (revolutions per minute) speed and shows the actual rotor speed at any specific time during the spin session.
4. Press to FCN button for the third time to check the highest spin speed achieved. Clear the record by pressing the ON/CLR button. The highest spinning speed is renewed automatically.
5. Press the FCN button for the fourth time to record the number of revolutions during 30, 60 or 90 seconds. Choose the time interval by pressing the ON/CLR button. Once the rotor is set in motion, the display begins counting down and continues recording until the last second, after which the total accumulated revolutions is displayed.

Warranty statement

All electrical and electronic products commercialized by Prozis via www.prozis.com are covered by the warranty applicable to the purchase and sale of consumer goods.

GENERAL CONSIDERATIONS

This document contains the terms and conditions of Prozis’ warranty for final consumers. This warranty is valid exclusively for consumers who purchase the product for non-professional purposes.

WARRANTY PERIOD

Prozis guarantees the product is to remain free from material and production defects for a 2-year period, counting from the date of initial purchase by a consumer and respective delivery, or for longer if legally established by the applicable national law.
In the event that repair is required, this 2-year period is suspended during repair time.

CONSUMABLES

The gradual performance decrease caused by prolonged use of the product’s consumable components, such as batteries, is not covered by this warranty unless the malfunction is
caused by faulty design, materials, or production.

HOW TO MAKE A CLAIM

If the need arises to exercise the rights conceded to you through this warranty, please contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions or recommendations. Contact and technical assistance information is also provided at the end of this warranty.
Any claims made regarding this warranty will only be valid if proof of purchase is presented by the original customer. This proof of purchase may be the original invoice or receipt, as long as it includes information regarding the date of purchase and the product’s model name.

WARRANTY REPAIRS

Any repairs made under this warranty cannot be made by third parties. This warranty does not apply to any repairs, or damage caused directly by such repairs, that have impacted or caused the damage that is the subject of the respective warranty claim.

EXCLUSIONS

The following situations are not covered by this warranty:

Any wear and tear of parts and components resulting from normal product use.
Cracks, dents, scratches, and other types of surface damage that only affect the product’s appearance.
Any malfunction caused by inappropriate use of the product that does not comply with user manual instructions.
Use and storage of the product not complying with user manual instructions.
Opening of the product by a third party who is not authorized to proceed to its repair.
Altering or changing parts or components, whether internal or external.
Damage caused by battery leakage resulting from the breaking of any of its components, or from product misuse.
Malfunction or damage due to reasons that cannot be ascribed to the production or design of the product.
Use of the product in the context of a business, occupation, or commerce.
Malfunction due to use that does not comply with the technical or security norms in force, or with user manual instructions.

The services provided by Prozis in order to repair or fix any fault or malfunction resulting from the verification of any of the aforementioned excluded situations will be subject to payment of labor, transport, and component costs.
The customer shall bear all risks of loss and damage to the product during transportation to Prozis. This warranty will be void if the returned product arrives with labels or stickers that have been removed, damaged, tampered with or modified in any way.

LIMITED RESPONSIBILITY

Prozis cannot be held responsible for indirect damage or loss due to usage of the product.

WHAT TO DO?

To request warranty service, you must first contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions and recommendations.
Send back the product inside its original packaging, including all accessories and documentation, to the following address:
PROZIS
Rua do Cais nº 198
4830-345 Póvoa de Lanhoso
Braga – Portugal