SILVERCREST SADH A1 Aroma Diffuser Instructions

AROMA DIFFUSER
Operation and safety notes

|
---|---

Warnings and symbols used

The following warnings are used in this user manual and on the packaging:

DANGER! This symbol in combination with the signalword “Danger” marks a high-risk hazard that if not prevented could result in death or serious injury.
WARNING! This symbol in combination with the signal word“Warning” marks a medium-risk hazard that if not prevented could result in death or serious injury.
CAUTION! This symbol in combination with the signal word “Caution” marks a low-risk hazard that if not prevented could result in minor or moderate injury.

| Read the manual.
---|---
**∼**| Alternating current / voltage
| Direct current / voltage
**Hz**| Hertz (supply frequency)
**W**| Watt
**A**| Ampere (current)
| The symbol for a Protection Class II product.
**| ATTENTION! This symbol with the signal word “Attention” indicates possible property damage.
---|---
` IP20`| Protection against penetration of solid objects (Ø > 12 .5 mm)
| NOTE: This symbol in combination with “Note” provides additional useful information.
| For ESSENTIAL OIL –
LAVENDER:
May cause an allergic skin reaction. Causes serious eye irritation.
For ESSENTIAL OIL –
TEA TREE:
Causes skin irritation. May cause an allergic skin reaction.
| Use the product in dry indoor spaces only.
---|---
| The polarity of the output terminal
| Highest rated ambient temperature
| Short-circuit proof safety transformer
| SMPS (Switch mode power supply unit) (switching power supply)
| For ESSENTIAL OIL –
TEA TREE:**
May be fatal if swallowed and enters airways.
| Tactile hazard symbol for people with impaired vision.

AROMA DIFFUSER

Introduction

We congratulate you on the purchase of your new product. You have chosen a high-quality product. The instructions for use are part of the product. They contain important information concerning safety, use, and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

• Intended use
  The product is designed for air refreshing and humidification in enclosed spaces . Do not use the product for any other purpose . The product is only intended for private household use, not for commercial purposes . The manufacturer accepts no liability for damages caused by improper use.

• Scope of delivery
  After unpacking the product, check if the delivery is complete and if all parts are in good condition. Remove all packing materials before use.
  (Fig. A, B)
  1x Aroma diffuser
  1x Power adaptor
  1x Measuring cup
  2x Aroma oil
  1x Leaflet for aroma oil
  1x Instruction manual

**** Safety instructions

BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!
In the case of damage resulting from non-compliance with these operating instructions, the warranty claim becomes invalid! No liability is accepted for consequential damage! In the case of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability is accepted!

DANGER TO LIFE AND RISK OF ACCIDENTS FOR INFANTS AND CHILDREN! Never leave children unsupervised with the packaging materials . The packaging material poses a suffocation hazard. Children frequently underestimate the dangers . Always keep children away from the packaging material.

• This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the product in a safe way and understand the hazards involved. Children shall not play with the product . Cleaning and user maintenance shall not be made by children without supervision.

Avoid electric shock
**WARNING! Keep the product dry.
WARNING! If the product falls into the water, immediately disconnect the power adaptor from the socket outlet before reaching into the water.
****WARNING! Never touch the power adaptor with moist or wet hands.
WARNING! Never submerge the product or the supply cord with the power adaptor in water or any other liquid and never rinse these under running water.
**

• For additional protection, the installation of a residual current device RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.

•  Only use the original power adaptor supplied for the main operation.

• Disconnect the power adaptor from the socket-outlet
  –if a malfunction occurs, –before you clean the product,
  –during a thunderstorm –before filling/emptying the water tank, and
  –after each use.
  When doing so, remove the power adaptor directly from the socket and do not pull it out using the supply cord.
  Avoid the risk of injury
  

• Place the product only on flat surfaces, so that tipping over is excluded .

• Never tilt or empty the product during operation .

• Do not empty the product through the ventilation slot  8.

• Do not use the product if you detect any kind of visible, external damage. Never use a damaged product .

• If liquid gets into the product, check before using the product once more.

• If you notice that the supply cord, power adaptor, housing, or another part has become damaged, the product can no longer be used .

• Repairs should only be carried out by a specialist. Improper repairs may result in considerable danger to the user .

• The light source contained in this product shall only be replaced by the manufacturer or his service agent or a similarly qualified person.

•  Do not use defective attachments with the product as these could have sharp edges .

• Defective components must always be replaced with original spare parts .

• The appliance is only to be used with the recommended vaporizing medium. The use of other substances may give rise to a toxic or fire risk .

• Connect the supply cord to the product before connecting the power adaptor to the socket outlet.

• Lay the supply cord so nobody will step on or trip over it.

Avoid damage to property

• Protect the product from moisture, drops of water, and splashing water.

• Ensure that the supply cord does not get stuck in cupboard doors and that it is not pulled over hot surfaces. This could damage the supply cord‘s insulation.

• Do not place the product on hot surfaces, near hot surfaces, or near an open fire.

• To prevent impermissible heating, do not cover the power adaptor and the product during use .

• Do not use any corrosive or abrasive cleaning agents .

• Only fluids shall be used to meet the national health requirements.
  DANGER! Refer to the included leaflet for hazard statements and precautionary statements regarding the aroma oil.

• No action is needed from users to shift the product between 50 and 60 Hz. The product adapts itself for both 50 and 60 Hz.

• Parts description

( Fig. A, B)

1. Steam outlet
2. Diffusion cone
3. Water tank cover
4. Maximum fill level
5. Water tank with LED
6. Power adaptor
7. Measuring cup
8. Ventilation slot
9. Dish
10. (timer button)
11. (on/off button)
12. (light button)
13. Timer setting indicators (1h, 3h, 6h)
14. Plug socket (bottom)
15. Pouring direction arrow
16. Pouring spout

Technical data

Manufacturer’s name or trademark, commercial registration
number and address| Manufacturer’s name:
Xiamen Keli Electronics Co ., Ltd.
Manufacturer’s commercial registration
number: 9135021173 7865674J
---|---

Manufacturer’s
address: No.19, XingLin
North 3rd Road, Jimei
District, Xiamen, Fujian,
China

Plug-in mains adapter (Model identifier:
SW-240050):
Certification: GS (TÜV Rheinland)

Before use

NOTES:

• All parts have to be unpacked and the packaging material has to be removed completely.
• Verify the package contents are complete and undamaged!

Operation

• Insert the cable plug of the power adaptor 6 into the plug socket 14 underneath the product .

• Place the product on a level and stable surface .

• Remove the diffusion cone 2 and the water tank cover 3.

• Fill water tank 5 by using the measuring cup 7 with tap water.
  NOTES:

• Do not fill in water above the maximum fill level 4 in water tank 5.

• Water tank 5 holds 300 ml, but the measuring cup 7 holds 150 ml. Hence, 2 times of pouring is required to fully fill the water tank.

• Add 5 to 7 drops of the desired essential oil into the water tank 5. The number of drops depends on the size of the room and the preference of the user.

• Re-attach the water tank cover 3 . Re-attach the diffusion cone 2 on the water tank 5.

• Connect the power adaptor 6 to a socket outlet.

• Switching on Press 11. The product operates with fragrant mist output and unlimited operation time (or until all water is used up).

NOTE: During operation, do not remove the diffusion cone 2 and the water tank cover 3 . Otherwise the fragrant mist cannot be released properly. The water in water tank 5 may splash out and enter the inner parts of the product through the ventilation slot 8.

Timer and output control
Changing the timer: Press 10 (repeatedly) .

NOTES:

• The product automatically switches off as soon as the water in water tank 5 has been used up.
• The running time is approximately 12 hours if water is filled up to the maximum level of the water tank 5 .  Only the time but not the amount of mist can be set.
• LED control
  The LED 5 can shine in 14 color combinations (7 color combinations with bright and dark versions) .

• Changing back to automatic color changing mode: Switch the LED 5 off and then on again.
• Switching off the product
• Switching off: Press 11
• Disconnect the power adaptor 6 from the socket-outlet.
• Disconnect the cable of the power adaptor 6 from the plug socket 14.
• Remove the diffusion cone 2 and the water tank cover 3.
• Empty the product via the pouring spout 16. Take note of the pouring direction arrow 15 on the water tank 5.

ATTENTION! To avoid damage, do not discard the water through the ventilation slot 8.

• Cleaning and care
  DANGER! Risk of electric shock! Disconnect the power adaptor 6 from the socket outlet before cleaning the product. Never touch the power adaptor with moist or wet hands . Always keep the power adaptor and supply cord dry.

WARNING! Never immerse the product in water or other liquids. Never hold the product under running water.

• Do not use any corrosive or abrasive cleaning agents.

• Clean the product with a damp cloth. If any stubborn stains remain, place a few drops of mild detergent on the damp cloth and clean it again.

• Clean dish 9 regularly by using a slightly moistened cotton bud.

• Descaling
  Descale the product if visible deposits occur or if the steam output is restricted.

• Use a standard commercial liquid descaling agent.

• Fill the water tank 5 to the maximum fill level 4 with descaler.

• Wait according to the instructions of the descaler.

• Pour the dirt away. Clean water tank 5 with a soft and slightly damp cloth.

• Rinse the diffusion cone 2 and the water tank cover 3 with running water

• Dry the diffusion cone 2 and water tank cover 3 before putting them on the product.

• Storage

• Store the product in the original packaging when it is not in use .

• Store the product at a dry location out of the reach of children.

Troubleshooting

= Fault
= Possible cause
= Action
= The product does not work.
= Water has been used up.
= Disconnect the product from the socket-outlet. Re-fill the water in the water tank 5.
= The fragrant mist cannot be released properly.
= The water tank cover 3 and the diffusion cone 2 are not assembled properly.
= Re-attach the water tank cover 3 and then diffusion cone 2 on the water tank 5.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which is marked with abbreviations (a) and numbers (b) with the following meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: composite materials.
The product and packaging materials are recyclable, dispose of them separately for better waste treatment . The Triman logo is valid in France only.
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
**** To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects, you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below. The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, used, or maintained improperly.
The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e .g . batteries) or for damage to fragile parts, e .g . switches, rechargeable batteries, or glass parts.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions: Please have the till receipt and the item number (e .g . IAN 123456_7890) available as proof of purchase. You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product. If functional or other defects occur, please contact the service department listed either by telephone or by e-mail. You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service
Service Great Britain
Tel .:08000569216
E-Mail:owim@lidl.co.u

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>