vtech RM7764HD 7-Inch Smart Wi-Fi 1080p Pan and Tilt Monitor User Guide

RM7764HD
7-inch Smart Wi-Fi 1080p
Pan and Tilt Monitor
Quick start guide

Congratulations
on purchasing your new VTech product. Before using this HD video monitor, please read
Important safety instructions.

What does HD Video Monitor do?
VTech 7-inch Smart Wi-Fi 1080p Pan and Tilt Monitor allows you to stay close to your baby when you are on the move or away.
This monitor is Wi-Fi enabled, which uses your home wireless network to stream live video and audio through the HD baby unit and 7-inch color screen parent unit. It allows you to maintain a constant connection to your baby.
You can also monitor from your smartphone and mobile tablet.
VTech 7-inch Smart Wi-Fi 1080p Pan and Tilt Monitor uses the MyVTech Baby 1080p app to let you instantly see and hear what’s happening with your baby from anywhere in the world. The app can be downloaded from the App Store or the Google Play TM Store, directly from your smartphone or mobile tablet.

Important safety instructions

The applied nameplate is located at the bottom of the baby unit’s base.
When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:

1. Follow all warnings and instructions marked on the product.

2. Adult setup is required.

3. CAUTION: Do not install the baby unit at a height above 2 meters.

4. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.

5. This product is not intended for use as a medical monitor.

6. Do not use this product near water. For example, do not use it next to a bathtub, washbowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.

7. CAUTION: Use only the battery provided. There may be a risk of explosion if the wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitudes during use, storage or transportation. Disposal of the battery into fire or a hot oven, or mechanically crushing or cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the instructions.

8. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product.
   Power adapter information:
   Output: 5V DC 1A
   VTech Telecommunications Limited.
   Model: VT05EEU05100(EU), VT05EUK05100(UK);
   Ten Pao Industrial Co.,Ltd.
   Model: S005BNV0500100(EU),S005BNB0500100(UK);
   Rechargeable battery information:
   Lithium-ion Polymer 2700mAh 3.7V
   Model: Springpower – 605078

9. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

10. For pluggable equipment, the socket outlet shall be installed near the equipment and shall be easily accessible.

11. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

12. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation.

13. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped.

14. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company.

15. Do not overload wall outlets or use an extension cord.

16.  Do not place this product on an unstable table, shelf, stand or other unstable surfaces.

17. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register.
    18. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.

18. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.

19. You should test the sound reception every time you turn on the units or move one of the components.

20.  Periodically examine all components for damage.

21. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and poweroff the baby monitor if you will not use it for some time.

22.  Children should be supervised to ensure that they do not play with the product.

23.  The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONS
Cautions

1.  Use and store the product at a temperature between 0  C and 40 C.
2. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source.
3. Batteries should not be exposed to excessive heat such as bright sunshine or fire.
4. Warning—Strangulation Hazard—Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9m) away). Do not remove this tag.
5.  Never place the baby unit(s) inside the baby’s cot or playpen. Never cover the baby unit(s) or parent unit with anything such as a towel or a blanket.
6. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances, and cordless telephones.

Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S.Food and Drug Administration, WTR recommends to physicians that:
Pacemaker patients
• Should keep wireless devices at least six inches from the pacemaker.
• Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.
Electromagnetic fields (EMF)
This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user’s manual, the product is safe to be used based on scientific evidence available today.

What’s in the box
our HD video monitor package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.

Requirements

For mobile access:
MyVTech Baby 1080p mobile app

baby unit

Overview

Baby unit overview

1. Light sensor

2. Camera lens

3. Microphone

4. Infrared LEDs
   • Allow you to see clearly in a dark surroundings.

5.  LED indicator
   • Red is steady on when the baby unit is connecting to the parent unit in direct mode.
   • Green is steady on when the baby unit and parent unit are connecting to your home Wi-Fi network via the Wi-Fi router.
   • Flashes red slowly during video streaming in direct mode.
   • Flashes green slowly during video streaming via home Wi-Fi network.

6. ON
   • Power on/off switch.

7. Speaker

8.  Power jack

9. Temperature sensor

10.  Slots for wall mounting
    • Wall mount bracket is included in your package.
    

11. PAIR
    • Press and hold for three seconds to enter pairing mode.
    • Reset the baby unit to factory default.
    1. Press and hold the PAIR key until you hear a beep sound.
    2. Release the PAIR key, and then press the PAIR key again five times until you hear another beep sound.
    3. The baby unit will sound another beep when the reset completes. Then, the baby unit will reboot.

Parent unit overview

1. LINK LED light
   • On when the parent unit is linked to the baby unit.
   • Flashes when the link to the baby unit is lost.

2. LED light
   • On when the parent unit is connected to AC power, and the battery is charging.
   • Off when the parent unit is disconnected from AC power, or when the parent unit is connected to AC power and the battery is fully charged.
   • Flashes when the parent unit battery is low and needs charging.

3.  level sound indicator light
   • Green on when a low sound level is detected by the baby unit.
   • Green and amber on when the moderate sound level is detected by the baby unit.
   • Green, amber, and red on when a high sound level is detected by the baby unit.

4. TALK
   • Press and hold to talk to the baby unit.
   • While in a submenu, press to exit.
   • Press to zoom in/out.

6 Arrow keys

• Press to navigate leftward, upward, rightward or downward, within the main menu and submenus.
• While viewing the image from the baby unit, press to pan the baby unit leftward, upward, rightward or downward.
• While viewing a zoomed image, press to move the zoomed image leftward, upward, rightward or downward.

7 MENU/SELECT
• Press to enter the main menu.
• While in a menu, press to choose an item, or save a setting.
8 – VOL/ VOL +
• Increase or decrease parent unit’s volume.
9 Microphone
10 POWER key
11 Power jack
12 RESET
• Force reboot the parent unit.
13 Antenna
14 Speaker
15 Stand

How the system works

Direct mode
The parent unit and the baby unit of your video monitor are connected to each other in Direct mode by default, which allows you to stream live video right out of the box. Direct mode connection lets you stream live video from the parent unit only.

Tip

• You may experience reduced signal strength if your parent unit and baby unit are far apart, or there are obstructing factors, such as internal walls, between them. Move the parent unit closer to the baby unit to improve the signal strength. You can also set up Router mode to connect via your home Wi-Fi network to improve the connection between your parent unit and baby unit.

Router mode
You can continue using your video monitor with a Direct mode connection, or you can set up your monitor in Router mode connection.
Router mode uses your home Wi-Fi network to connect your video monitor. It supports streaming live video through parent unit and smartphone app.
We recommend that you set up your monitor in Router mode to enjoy streaming live video via your parent unit with a better connection.

If you want to stream live video remotely
with your mobile device, download and install the MyVTech Baby 1080p mobile app. With the mobile app, your Wi-Fi router (not included) provides Internet connectivity to your HD video monitor system. It serves as a communicating channel between your baby unit and mobile device, allowing you to monitor and/or control your baby unit wherever you are. For detail, see the Download app for mobile access section in this quick start guide.

Note

• Your parent unit detects the connection signal strength. If you have connected your video monitor with your home Wi-Fi network, your parent unit automatically switches to direct or router mode – the one that has stronger signal strength.

Protect your privacy and online security

VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of industry-recommended best practices to help keep your wireless connection private and your devices protected when online. We recommend you carefully review and consider complying with the following tips.
Ensure your wireless connection is secure.

• Before installing a device, ensure your router’s wireless signal is encrypted by selecting the “WPA2-PSK with AES” setting in your router’s wireless security menu. Change default settings.

• Change your wireless router’s default wireless network name (SSID) to something unique.

• Change default passwords to unique, strong passwords. A strong password:
  – Is at least 10 characters long.
  – Is complex.
  – Does not contain dictionary words or personal information.
  – Contains a mix of uppercase letters, lowercase letters, special characters and numbers.
  Keep your devices up to date.

• Download security patches from manufacturers as soon as they become available. This will ensure you always have the latest security updates.

• If the feature is available, enable automatic updates for future releases.
  Disable Universal Plug and Play (UPnP) on your router.

• UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices to open inbound ports without any intervention or approval from you.
  A virus or other malware program could use this function to compromise security for the entire network.
  For more information on wireless connections and protecting your data, please review the following resources from industry experts:
  1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips –
  www.fcc.gov/consumers/guides/how-protect-yourself- online.
  2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet –
  www.us-cert.gov/ncas/tips/ST15-003.
  3. Federal Trade Commission: Using IP Cameras Safely – https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely.
  4. Wi-Fi Alliance: Discover Wi-Fi Security – http://www.wi-fi.org/discover- wi-fi/security.

Connect, charge and power on the baby monitor

Notes

Connect the baby monitor

• The rechargeable battery in the parent unit is built-in.
• Use only the power adapters supplied with this product.
• Make sure the parent unit and the baby unit are not connected to the switch-controlled electric outlets.
• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.
• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.
  Charge the parent unit battery
  The parent unit runs on a rechargeable battery or AC power. To continuously monitor your baby, keep the parent unit connected to AC power. With the battery alone, the parent unit can cordlessly run for a short time only.

Slide the switch to ON to power on your baby unit.

NOTE:

• When powering up, the baby unit’s status LED turns on. It will turn off after a while and keeps off.
• The status LED is set to off by default.
  If you want to keep the LED on, press MENU, then go to Po

  Status LED and turn it on.

NOTE:
The camera lens and surface may get warm during normal operation.

Raise the parent unit antenna for better reception

Charge the battery before use

NOTE:

• The parent unit is fully charged after 8 hours of continuous charging.
• The standby time varies depending on your actual use.
  After the parent unit is fully charged, press POWER until the welcoming screen appears.

The battery icon indicates the battery status (see the following table).

charge and may be used
for only a short time.| Charge without interruption (about
30 minutes).
The battery icon becomes
solid| The battery is fully
charged.| To keep the battery charged, connect
it to AC power when not in use.

Main
Menu
Options

Monitoring mode
(* For pairing with RM724HD only)

• View baby unit 1 or 2 in Single mode.
• View both baby units in Patrol mode.
• View both baby units in Split screen.

Melodies and soothing sounds

• Select play all melodies and soothing sounds, or play one of the five melodies and four soothing sounds.
• You can also set the timer to stop playing after 15, 30 or 60  minutes, or playing non-stop.

Alerts – Sound, motion and temperature

• Select the sound and motion sensitivity level.
• Turn on/off sound and motion detection alerts.
• Select maximum and minimum temperature for alert range.
•  Turn on/off temperature alert.
• Turn on/off Auto Wake Up function.

  Parent unit settings

• Adjust parent unit screen brightness.
• Turn on/off dim mode.

Baby unit settings

• Turn on/off Night Vision.
• Turn on/off baby unit’s status LED.
• Adjust baby unit’s speaker volume.
• Update baby unit’s security key.

General settings

• Connect to a home Wi-Fi network.
• Connect mobile phone.
• Turn on/off Low Battery Tone.
• Turn on/off No Link Alert.

Status icons

| Connected to home Wi-Fi network.
---|---
Direct mode – parent unit and baby unit connect to each other directly.
Parent unit and baby unit have never been connected to a home Wi-Fi router before.
Baby unit 1 is being viewed in Single or Split mode.
Baby unit 2 is being viewed in Single or Split mode (For pairing with RM724HD only).
Baby unit 1 and 2 are being viewed in Patrol mode (For pairing with RM724HD only).
Baby unit 1 and 2 are being viewed in Split mode (For pairing with RM724HD only).
Night vision is turned on.
Motion alert is turned on.
Sound alert is turned on.
Melodies and soothing sounds are turned on.
Parent unit speaker is muted.
The temperature alert is turned on.

Basic operation

After powering up your video monitor, the parent unit streams live video in direct mode.
We recommend you follow the instructions on the screen to set up a home Wi-Fi network with your monitor for functionality enhancements and mobile access. See Auto software
and firmware update and Download app for mobile access in this quick start guide. Use the menu
Press MENU on the parent unit to enter the main menu, choose a menu item or save a setting. You can use the parent unit menu for advanced settings or operations, such as
to play or stop lullaby or adjust the motion and sound detection settings. While in the menu:

• Press, o scroll among the menu options.
• Press SELECT to select an item.
• Press TALK to return to the live video.
• Press t o go to the Help & info page.

Adjust speaker volume
Press -VOL / VOL+ to adjust your parent unit speaker volume. It determines the volume of sound transmitted from your baby unit.

Zoom
Press to zoom in or out.

Talk to your baby via the baby unit

1.  Press and hold the TALK key.
2. When the icon displays on-screen, speak to your parent unit. Your voice is transmitted to the baby unit.
3. When finish talking, release the TALK key and hear your baby again.

Turn on/off baby unit’s status LED
You may set the status LED indicator of your baby unit on or off. Go to
> Status LED.

Turn on/off the parent unit screen
You can turn on or off the parent unit screen without powering off the parent unit. You can still hear sounds from the baby unit.

• Press POWER on the parent unit to turn off the screen.
• Press any keys on the parent unit to turn on the screen again.

Tip

You can reset the parent unit by pressing the RESET key at the back of the unit.
Use a pin and insert it into the hole on the back of the parent unit, and then press the button inside.

NOTE
• This HD video monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such.
Testing the sound level of the HD video monitor

CAUTION
• For hearing protection, make sure the parent unit is more than 3 metres away from the baby unit. If you hear any high-pitched noise from the parent unit, move the parent unit further until the noise stops. You can also press – VOL on the parent unit to lower or mute the noise.

TIP
• Increase the parent unit speaker volume if you cannot hear the sounds transmitted from the baby unit.

Positioning the HD video monitor

CAUTION
• Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s cot or playpen.

1. Place the baby unit more than 1 metre away from your baby.

2. Adjust the angle of the baby unit to aim at your baby. Refer to the online help topics on how to use the Pan/tilt and Zoom functions of the baby unit.

3.  To avoid causing high-pitched screeching noise from your HD video monitor
   • Make sure your baby unit and parent unit are more than 3 metres apart; OR
   • Turn down the volume of your parent unit.

Auto software and firmware update
To ensure that your HD video monitor is always at its best performance, the parent unit will prompt a message and ask you to update its software and the baby unit’s firmware
when there are new versions available.

• Follow the instructions on the parent unit screen to update your HD video monitor.
  If you skip the updates, the parent unit and the baby unit will be updated automatically when the parent unit is powered off, and then powered on again.
  Connect your HD video monitor with your home Wi-Fi network

• You must connect your video monitor to your secured home Wi-Fi network in order to receive the latest software and firmware updates. To set it up, go to
  > Configure Wi-Fi.

Download app for mobile access

You can download the free MyVTech Baby 1080p mobile app and install it to a mobile device, then use your mobile device and the mobile app to monitor your areas remotely.

1. Press MENU when the parent unit is idle.
2. Go to > Connect Mobile Phone.
3. Scan the QR code in the parent unit to download the app into your mobile device.
4.  Follow the instructions in the mobile app to set up and pair your baby unit to the mobile app.
   Alternatively, you can download the mobile app from the App Store or Google Play store.

Install MyVTech Baby 1080p mobile app

1. Browse the App Store or the Google Play store.
2. Search for the mobile app with the keyword “my tech baby 1080p“.
3. Download and install the MyVTech Baby 1080p mobile app to your mobile device.
   OR
   Scan the QR codes on the right to get the app.
   • Make sure your mobile device meets the minimum requirement for the mobile app.
   Minimum requirement
   The mobile app is compatible with:
   • Android TM 5.0 or later; and
   • iOS 8.0 or later.

https://vttqr.tv/?q=4VP04

2 After installing the mobile app, follow the instructions in the mobile app and parent unit to set up and pair your baby unit.
In your mobile device:

1.  Tap to run the mobile app in your mobile device, and then create an account.

2. We recommend that you use common webmail services, such as Google Gmail for the registration of your mobile app account. Check your email (and Spam folder), and
   activate your new account via the email link, then sign in to your account.

3. Follow the instructions in the mobile app to pair the baby unit. Tap + in the mobile app to get started.

General product care

To keep this product working well and looking good, follow these guidelines:

• Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps).
• DO NOT expose it to direct sunlight or moisture.
• Avoid dropping the product or treating it roughly.
• Clean with a soft cloth.
• DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap.
• DO NOT use cleaning spray or liquid cleaners.
• Make sure the parent unit and the baby unit are dry before you connect them to the mains again.

Storage

When you are not going to use the HD video monitor for some time, store the parent unit, the baby unit and the adapters in a cool and dry place.

Frequently asked questions

Below are the questions most frequently asked about the HD video monitor.

Can I turn off the parent unit screen but keep hearing sound from the baby unit?| The parent unit’s LCD display will dim automatically after being inactive for some time. Press MENU/SELECT will turn the LCD display back on.
---|---
Why does the baby unit not respond
normally?| Try the following (in the order listed) for common cure:
1. Disconnect the power to the baby unit.
2. Wait a few minutes before connecting power back to the baby unit.
3. Reboot the parent unit.
Why is my screen in black and white?| The baby unit has a light sensor that measures the ambient light. When the ambient light is dim, such as during nighttime or in a dark room, the baby unit
activates its infrared LEDs, and the parent unit displays the live video in black and white.
Why does my baby unit show offline? Why is the connection lost
every now and then?| The baby unit may lose the Internet connection. Check your network and the router setting.
Other electronic products may cause interference with your baby unit. Try installing your baby unit as far away from these electronic devices as possible.
Why don’t I hear a sound/Why can’t I
hear my baby cry?| The parent unit speaker volume may be too low. Press VOL + to increase the volume.
You may have set a low sound sensitivity level. Set the sound sensitivity to a higher level.

test the location for the baby unit

If you plan to install your baby unit in a designated location and use your home Wi-Fi network to connect your video monitor, you need to test which of your selected monitoring areas within the house have good Wi-Fi signal strength. After you have powered on your parent unit, you can use your parent unit’s Wi-Fi signal strength indicator
to assist in checking. Once you have identified a suitable location, you can install your baby unit. Adjust the distance between your baby unit and the Wi- Fi router if needed.

TIP
• Depending on surroundings and obstructing factors, such as the effect distance and internal walls have on signal strength, you may experience reduced Wi-Fi signal. To improve the Wi-Fi signal strength, adjust the distance or direction of your parent unit. Check with your parent unit again.

Need help?
Driven by system updates, the software, online help topics, and online FAQs will be updated periodically.
For operations and guides to help you use your HD video monitor, and for the latest information and support, go and check the online help topics and online FAQs.
Use your smartphone or mobile device to access our online help.

1. Go to www.vtechbabycare.com; OR
   Scan the QR code on the right. Launch the camera app or QR code scanner app on your smartphone or tablet. Hold the device’s camera up to the QR code and frame it. Tap the notification to trigger the redirection of the online help.
   – If the QR code is not clearly displayed, adjust your camera’s focus by moving your device closer or further away until it is clear.

2. Search for the model – RM7764HD.
   If you would like to contact us, visit
   www.vtechbabycare.com or scan the QR code.

https://vttqr.tv/?q=4VP06

mount the baby unit (optional)

NOTES
• Check for reception strength and baby unit angle before drilling the holes.
• The types of screws and anchors you need depend on the composition of the wall. You may need to purchase the screws and anchors separately to mount your baby units.

1. Place the wall mount bracket on a wall and then use a pencil to mark two holes in parallel. Remove the wall mount bracket and drill two holes in the wall (7/32 inch drill bit).

2.  If you drill the holes into a stud, go to step 3.
   • If you drill the holes into an object other than a stud, insert the wall anchors into the holes.  Tap gently on the ends with a hammer until the wall anchors are flush with the wall.

3. Align the wall mount bracket and screws with the holes in the wall as shown. Tighten the screw in the middle hole first, so that the wall mount bracket position is fixed. You can tighten the other screw in the top hole.

4.  Place the baby unit on the wall mount bracket, and then slide it forward until it locks into place. Connect the power adapter to the baby unit and a power supply not controlled by a wall switch.

5. Insert the screws into the holes and tighten the screws until only 1/4 inch of the screws are exposed.

6. Place the baby unit on the wall mount bracket, and then slide it forward until it locks into place. Align the holes on the wall mount bracket with the screws on the wall, and slide the wall mount bracket down until it locks into place.

7.  You can maximize your baby unit’s viewing angles by tilting the wall mount bracket.
   Hold the baby unit, and then rotate the knob in an anticlockwise direction. This will loosen the joint of the wall mount bracket.
   Tilt your baby unit up or down to adjust to your preferred angle. Then, rotate the knob in a clockwise direction to tighten the joint and secure the angle.

CUSTOMER SERVICE AND PRODUCT WARRANTY

PRODUCT WARRANTY
ONE
YEAR
Thank you for choosing this quality product from VTech.
We hope it will bring many hours of entertainment, imaginative play and learning.

1. The product detailed above is covered by a one-year warranty from the date of purchase, against any defects in materials or workmanship.

2. The product may be returned to the place of purchase. Alternatively, the product can be returned to VTech Electronics Europe plc (see address below), with proof of purchase, without proof of purchase no replacement will be provided.

3. VTech Electronics Europe plc will examine the product and if it is found to be defective due to faulty materials or workmanship, will replace the product at their discretion.

4. If the product covered by this warranty is damaged due to misuse, modification or unauthorized repair, or because of faulty batteries, battery discharge or incorrect
   electrical connections, then this warranty becomes void.

5. This warranty is personal to the original purchaser and is not transferable.

6. Breakages to the LCD screen are not covered by the warranty.

7. Returns to VTech Electronics Europe plc should include a cheque or postal order for £1.50 towards the cost of return postage and packaging.

8. Products returned to VTech Electronics Europe plc, should be addressed as follows and packed carefully to avoid damage in transit (Please do not include batteries or adaptor). Please include details of the fault together with your name and address.

9. To keep an online record of your warranty, please register your product online at www. vtech.co.uk/warranty
   Vtech Electronics EU PLC, c/o XPO Logistics, Warehouse 350, Cat & Fiddle Lane, West Hallam, DE7 6HE
   THIS WARRANTY IS OFFERED AS AN EXTRA BENEFIT AND DOES NOT AFFECT CONSUMERS’ STATUTORY RIGHTS.

This warranty is valid for the UK and Eire only. For products purchased outside the UK and Eire, please contact your local distributor or place of purchase.
IMPORTANT
Please retain this booklet with your sales receipt as proof of the date of purchase.
Customer Service
Please call our Consumer Services Department on 03306 780149 (from UK) or +44 3306 780149 (outside UK) and a service representative will be happy to help you.

TECHNICAL SPECIFICATIONS

Frequency| Baby unit: 2412 – 2462 MHz

Maximum power used by the transmitter: 0.10W (100mW)

---|---
Channels| 13
LCD| 7″ Color LCD

(IPS 1200×800 pixels)

Nominal effective range| Actual operating range may vary according to environmental conditions at the time of use.
Power requirement| Parent unit/baby unit power adapters:

1. Tenpao, SOO5BNB0500100;

2Rated output: 5V DC 1000mA

Parent unit battery: 3.7V Lithium-ion battery

Android ™are trademarks of Google Inc.
App Store is a trademark of Apple Inc., registered in the U.S. and other countries.
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. and Google Play

**** Specifications are subject to change without notice.
© 2021 VTech Communications, Inc.
All rights reserved. 02/21. RM7764HD_UK_QSO_V4

 Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pn) set out in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the market after 13th August, 2005.
Help protect the environment by disposing of your product or batteries responsibly.

Declaration of Conformity
This product is intended for use within Europe and UK.
This equipment complies with the essential requirements to EU’s Radio Equipment Directive (2014/53/EU) and the UK’s Radio Regulations 2017 on radio systems and telecommunication equipment.
VTech Telecommunications Ltd. hereby declares that this Video Monitor RM7764HD is in compliance with the essential requirements and other
relevant provisions of EU’s Radio Equipment Directive (2014/53/EU) and UK’s Radio Equipment Regulations 2017.
The Declaration of Conformity for the RM7764HD is available from www.vtechbabycare.com.
Manufacturer: VTech Telecommunications Ltd.

23/F., Tai Ping Industrial Centre, Block 1, 57 Ting kok Road, Tai Po, Hong Kong.
Importer: VTech Electronics Europe Plc.
Napier Court, Abingdon Science Park, Abingdon OX14 3YT, U.K.

References

• Electronic Learning Toys | Best Learning Toys | VTech UK
• Before You Connect a New Computer to the Internet | CISA
• Electronic Learning Toys | Best Learning Toys | VTech UK
• VTech Telecom Products European Official Site
• VTech Canada Official Site | Best Home Office & Business Phones
• VTech Cordless Phones Official Site | Best Home Office & Business Phones
• Security | Wi-Fi Alliance
• VTech Cordless Phones Official Site | Best Home Office & Business Phones
• VTech Cordless Phones Official Site | Best Home Office & Business Phones
• How To Secure Your Home Security Cameras | Consumer Advice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>