kogan KAMN34F1QULA 34 Inch 21:9 Curved Gaming Monitor User Guide

USER GUIDE
34″ 21:9 CURVED GAMING MONITOR
3440×1440 100Hz
KAMN34F1QULA

SAFETY & WARNINGS

• Read all instructions before using the appliance and retain them for reference.
• This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
• Do not insert any object or spray any liquid into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces, or other sources of heat, as well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord, or any connected cable.
• Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.
• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or the product may be damaged and the warranty will be invalid.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

COMPONENTS

OVERVIEW

Button

| Function
---|---

M

| Menu button: Confirm/call up the main menu.
| Down button: Move down in the menu/quickly enter the GamePlus.
| Up button: Move up in the menu/quickly enter the ECO.

E

| Exit button: Exit/return to the previous menu/quickly enter the RGB Range.
| Power button: Turn on/o‑ the monitor.

Indicator

Indicator

|

Status

---|---
Solid Blue| Power is on and the monitor operating normally.
Flashing Blue|

No video input signal or the monitor is in standby.
Ensure your computer is turned on and operates normally and check that all video cables are fully plugged in and/or connected to the monitor.

ASSEMBLY

1. Open the carton, remove the stand arm, base, and headphone stand. Leave the monitor in foam.
   Secure the stand arm to the base using one of the screws.
   Attach the headphone stand to the stand arm.
   

2. Remove the bottom half of the protective foam from the monitor.
   Press the quick-release button and remove the stand plate then attach it to the stand assembly using two screws.
   Note:
   When handling the monitor, do not pinch the screen with your hand to avoid damaging the display.
   

3. Attach the stand plate and stand assembly back onto the rear of the monitor.
   Remove the remaining protective foam and stand the monitor upright.
   Note: To remove the stand from the monitor, slide the quick-release button-up and pull the stand assembly outwards.
   

VESA MOUNT

**VESA mounting pattern 75x 75mm, screw size M4.
Note:** VESA mount or mounting accessories are not included.

1. Open the box, take out the monitor with protection foam attached, and gently place it on a desktop or table. Ensure all components are removed from the foam covering.
   Press the quick-release button to remove the stand plate.
   If the monitor is already attached to the stand, remove the stand before proceeding with VESA mount assembly.
   

2. Remove the four screws from the rear case. Do not remove the monitor from the foam at this stage.
   

3. Remove the four VESA screws from the accessory bag and attach them to the rear casing.
   

4. During hanging of the product, do not pinch the screen with your hand to avoid damaging the screen.
   Instructions for attaching to the specific wall mount will be included with the mount.
   

Notes: To prevent the monitor on the mount from failing, please install it firmly and protect it fully. Do not place or hang any object on the mount. Ensure the height of the mount is less than 2 meters.

CONNECTIVITY

Power Cable
Connect the included power cable to the monitor power port and then connect the other end to a power outlet.

Audio Out
Connect an audio output device (speakers, headphones,s, etc.) to the 3.5mm audio port on the monitor.

HDMI
Connect an HDMI cable from the computer’s display output to the monitor’s display input.

DisplayPort
Use the supplied DP cable to connect the computer’s display output to the monitor’s display input.

OPERATION

1. Connect the monitor to your input device via HDMI or VGA.
2. Connect the power cable to your monitor and then connect the other end directly to a power socket.
3. Use the power button to turn the monitor on.

On-Screen Display (OSD)
The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on the screen after turning on the monitor and pressing the M button.
When using the monitor for the first time, it will configure optimal settings automatically.

1. Press one of the buttons (**M E**) to activate the browser screen.
   

2. Press (M) to enter the OSD screen.
   

3. Press up and down ( / ) buttons to browse the functions.
   With the desired function highlighted, press ( M ) button to enter the sub-menu.
   Press up and down ( / ) buttons to browse sub-menus, then press ( M ) button to
   confirm the desired function.
   Press up and down ( / ) buttons to highlight an option, then press ( M ) button to
   confirm the settings and exit the current menu.

4. Press the ( E ) button to exit the menu screen.

List of Functions

Main Menu| Sub Menu|

Option

---|---|---
Input Source| DP|
HDMI1|
HDMI2|
HDMI3|
Brightness/ Contrast| Brightness| 0-100
Black level| 0-100
Contrast| 0-100
DCR| On/Off
Color Setting| Gamma| 1.8/2.0/2.2/2.4/2.6
Picture Mode| Standard/Photo/Movie/Game/FPS/RTS
Color Temperature| Warm/CooVUSER
Low Blue Light| 0-100
Hue| 0-100
Saturation| 0-100
Picture Quality Setting| Sharpness| 0-100
Response Time| Off/High/Middle/Low
Noise Reduction| Off/High/Middle/Low
Dynamic Luminous Control| On/Off
Display| Aspect Ratio| Wide Screen/4:3/1:1/Auto
LedMode| NormaVOff/Flicker
Audio| Mute| On/Off
Volume| 0-100
Audio Source| Auto Source/DP/HDMII/HDM12/HDMI3
Multi-Window| Multi-Window| Off/PIP Mode/PBP 2Win
Sub Win2 Input| DP/HDMII/HDMI2/HDMI3
PIP Size| Small/Medium/Large
PIP Position| TopRight/TopLeft/BottomRight/BottomLeft
Swap|
OSD| Language| English
OSD H-Position| 0-100
OSD V-Position| 0-100
OSD Transparency| 0-100
OSD Time Out| 5-100
OSD Rotation| NormaU90/180/270
Other| Adaptive-Sync| On/Off
Reset| None

GAMEPLUS & RGB RANGE

1. Press any of the buttons (**M E**) to activate the navigation window.
   

2. Press the button to switch GamePlus modes. According to the needs of your game, choose the corresponding game icon. These game icons are primarily designed to optimize your aim during shooting games, though they can be used for other scenarios.
   

3. Press the button to switch between multiple Picture modes, among which the standard model is suitable for most activities.
   

4. Press E to switch color gamut mode between “ Limited ” and “ Full ” when optimal configuration is used.
   

SPECIFICATIONS

The standard voltage and power supply may vary with countries, please refer to the label at the back of the product.
Dimensions| Without base: 808.6 x 123.1 x 363.3mm / approx. 6.62kg
With base: 808.6 x 225.6 x454.2mm / approx. 7.35kg
Tilting Angle| Forward titling: 5°±2°; Backward tilting: 15°±2°
Height Range| N/A
Rotation Angle| N/A
Vertical Angle| N/A
Environmental Conditions| Action| Temperature: 0°C- 40°C (32°F – 104°F) Humidity: 10%-90% RH (non-condensing)
Storage| Temperature: -20°- 60° (-4°F – 140°F) Humidity: 5%-95% RH (non- condensing)

NOTES

Need more information?
We hope that this user guide has given you the assistance needed for a simple setup.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.
kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>