TELTONIKA TSW200 Industrial Unmanaged Switch Gigabit Ethernet 8-Port PoE User Guide
- June 6, 2024
- teltonika
Table of Contents
TELTONIKA TSW200 Industrial Unmanaged Switch Gigabit Ethernet 8-Port PoE
FRONT VIEW
BACK VIEW
POWER SOCKET PINOUT
RJ45 LED MEANING
TECHNICAL INFORMATION
Technical specifications
Input voltage range*| 7 – 57 VDC
Max power consumption no PoE devices connected| 5.5 W
Max PoE power budget at PSE| 240 W
Max Ethernet cable length| 100 m
Bundled accessories specifications**
No accessories
HARDWARE INSTALLATION
- Connect your main internet router/modem to TSW200.
- Connect end devices (ex. IP camera) to TSW200 1 to 8 port, which you want to power via Ethernet.
- Connect 2 pin power plug to TSW200 to power up switch
SAFETY INFORMATION
TSW200 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
Hereby, TELTONIKA NETWORKS declares that this TSW200 is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU and 2014/35/EU.
Instruction Manual: Connect the power adapter to turn on the device. More information on https://wiki.teltonika-networks.com/
References
- Teltonika Networks - LTE Routers, Gateways & Modems for IoT
- wiki.teltonika-networks.com
- wiki.teltonika-networks.com/
- wiki.teltonika-networks.com/view/TSW200_CE