COOAU CU-SPC01 Action Camera User Manual

ACTION CAMERA CU-SPC01
User Manual

CU-SPC01 Action Camera

Dear customer,
We really appreciate it that you choose COOAU among so many brands.
COOAU has been attaching great importance to product quality and customer satisfaction. We sincerely hope you can make a few suggestions during your use to help us improve our products. As a professional designer, manufacturer and online seller of electronic products and outdoor supplies, we will publish more and more products in the near future. Stay tuned please. It can not be denied that there is no perfect product in the world. So if you me. any questions or receive a faulty product, please contact us on time.
Firstly, our intimate after sales team will immediately get back to you and solve your problems as soon as they receive your email. Second, all of our products are covered by one year warranty and 30 days money back without any excuse. We will send you a new replacement once we confirm the faulty product.
So what you need to do when encountering any problem or doubt is just to contact us at support@cooau.com
We are here at your service,
Kind regards, COOAU Support

WHAT’S IN THE BOX

CU-SPC01

1.Shutter / Power Button
2. Secondary screen
3. MicroSD Slot
4. Micro USB Port/ External Mic Port
5. Micro HDMI Port
6. Lens
7. Touch Screen| 8. Mode Button
9. Speaker
10. Down Button
11. Charging Indicator
12. Working Indicator
13. Battery Door
14. Bolt Hole
---|---

Note: Camera does not record sound when it is in the waterproof ase.

GETTING STARTED

Welcome to your COOAU CU-SPC01. To capture video and photos, you need a microSD card (sold separately).

Use brand name memory cards that meet these requirements:

• MicroSD, microSDHC, or microSDXC
• UHS-III rating at least
• Supportive Capacity is 32GB-128GB 100MB/s(FAT32)

Use brand name memory cards that meet these requirements:

• MicroSD, microSDHC, or microSDXC
• UHS-III rating at least
• Supportive Capacity is 32GB-128GB 100MB/s(FAT32)

Note:

1. Please format the MicroSD card first in this camera before using. If your MicroSD card is larger than 32G, before use, please first format the card into (FAT32) in the PC, then format it again in the system setting of cam.
2. MicroSD card stops recording when the storage of each file is over 4GB and starts to record again on a new file.
3. Be sure your hands are clean and dry before handling your SD card. Don’t place your MicroSD card near strong magnetic objects to avoid data error or loss.

POWERING ON + OFF
To Power On: Press and hold Mode button for three seconds. The camera beeps while the camera status light is on.
To Power Off: Press and hold the Mode button for three seconds. The camera beeps while the camera status light is off.
SWITCHING MODE:
To Switch Mode: Press the Mode button after you turn on the camera, you can switch the mode. To Exit Mode: Press the Mode button to exit mode.

SWITCH MAIN AND SECONDARY SCREEN

Press the Mode button for three seconds, you can switch the display screen to the secondary screen, press the Mode button for three seconds again, the display screen will switch back to the home screen.
TURNING ON / OFF Wi-Fi
To turn on Wi-Fi:
Method 1: Turn on camera, swipe down from the top of the screen with your finger to access to menu. then tap Wi-Fi icon to turn on Wi-Fi .
Method 2: Turn on camera, press and hold the Down Button three seconds to turn on Wi-Fi.
Method 3: Enter System Setting to turn on Wi-Fi.
TO turn off Wi-Fi
Press Mode button to turn off Wi-Fi.

THE INSTRUCTIONS OF TOUCH SCREEN USE

THE INSTRUCTIONS OF BUTTONS USE
When the cam is installed in waterproof case, the touch screen can’t be used. You need to open waterproof case mode before installing the cam in waterproof case. If you open the screen saver and waterproof case mode at the same time, after setting time, the IPS display will be turn off. To turn on the IPS display again, press any button on the camera. In video mode or photo mode, press Mode button, the screen will appear below menu. Then press the OK button, there will be more mode choices. Press DOWN button to select the mode you desired, then press OK button.

OVERVIEW OF MODES

There are 8 modes: Video, Slow Motion, Loop Recording,Time Lapse Video,Photo, Time Lapse Photo, Burst Photo, Self-Timer.

VIDEO MODE
Video Mode is the default mode when you turn on the camera.
In Video Mode, press Shutter button, the camera starts recording video. Press Shutter button to stop recording video.

SLOW MOTION VIDEO MODE
In Slow Motion video mode, press Shutter button, the camera records slow motion video.

LOOP RECORDING MODE
Using Loop Recording, you can continuously record video at the video length you set. For example, if you select a 5-minute interval, the cam will record many 5-minute small videos. When the micro SD card is full, the new files will cover the oldest one if loop recording is on.
Note: Loop recording is disabled when image stabilization is active.

TIME LAPSE VIDEO MODE
In Time Lapse Video mode, press Shutter button, the camera records video from frames captured at specific intervals. Time Lapse Video is captured without audio.

PHOTO MODE
In Photo mode, press Shutter button, the camera takes a photo.

TIME LAPSE PHOTO MODE
In Time Lapse Photo Mode, press Shutter button, the camera takes a serial of photos at 3s / 10s / 15s / 20s/ 30s intervals.

BURST PHOTO MODE
In Burst Photo mode, press Shutter button, the camera takes 3 photos per second, 5 photos per second or 10 photos per second.

SELF-TIMER MODE
In Self-timer mode, press OK button, it takes a self-timer photo.

CUSTOMIZING CU-SPC01

VIDEO SETTING

1. Video Resolution: 4K 60fps, 4K 30fps, 2.7K 30fps,1080P 120fps, 1080P 60fps, 1080P 30fps, 720P 240fps, 720P 120fps, 720P 60fps, 720P 30fps Default setting is 4K 30fps.

2. EIS (Image Stabilization):OFF/ON
   Default setting is off.
   This setting adjusts the footage to offset for motion during capture. The result is smoother footage, especially in activities with relatively small but fast motion including cycling, motorcycling, and handheld uses.
   Note: Image Stabilization is disabled when you select 4K 60fps, 1080P 120fps, 720P 240fps, 720P 120fps, 720P 60fps, 720P 30fps video resolution.

3. Distortion Correction: OFF/ON
   Default setting is off. Turn on Distortion Correction, it can correct the image distortion. Note: You cannot select Distortion Correction when Image Stabilization is on.Distortion Correction is disabled when you select 4K 60fps, 1080P 120fps, 720P 240fps, 720P 120fps video resolution.

4. White Balance: Auto / Sunny / cloudy / Incandescent / Fluorescence Default setting is Auto. White Balance lets you adjust the color temperature cool or warm lighting conditions. When you change this setting, the IPS display immediately shows you the effect on your image.

5. Exposure Setting EV: -3 -‘ +3
   Default setting is O. By default, your camera uses the entire image to determine the appropriate exposure level. However, EV lets you select an area that you want the camera to prioritize when determining exposure. This setting is particularly useful in shots where an important region might be over- or underexposed. When you change this setting, the IPS display immediately shows you the effect on your image. If you change modes, the camera returns to using the entire scene to determine the correct level of exposure.

6. Metering Mode: Average / Center / Spot / Matrix Default setting is Average.
   The metering mode refers to the way in which a camera determines exposure. Cameras generally allow the user to select between average, center, spot or matrix metering modes. The different metering modes allow the user to select the most appropriate one for use in a variety of lighting conditions.

7. Sharpness: High / Middle / Low Default setting is Middle. Sharpness controls the quality of details captured in your video footage or photos. When you change this setting, the IPS display display immediately shows you the effect on your image.

8. ISO: Auto / 100 / 200 / 400 / 800 / 1600 / 3200 /6400
   Default setting is Auto.
   ISO determines the camera’s sensitivity to light, and creates a trade-off between brightness and resulting image noise. Image noise refers to the degree of graininess in the image. In low light, higher ISO values result in brighter images, but with greater image noise. Lower values result in lower image noise, but darker images. When you change this setting, the IPS display immediately shows you the effect on your image.

9. Time Watermark: OFF/ON
   Default setting is On. If you turn on Date Stamp, this camera adds date/time stamp to the videos you record.
   If you turn off Date Stamp, this camera will not add date/time stamp to the videos you record.

10. Audio Record: OFF/ON
    Default setting is On. Turn off Audio Record, the camera does not record sound when you record video.

11. Diving mode: OFF/ON
    Default setting is OFF. Turn on Diving Mode, it can compensate for the lack of red light in underwater scenes. Diving Mode is designed to be used in tropical and blue water, optimized for use between 10 and 80 feet.

PHOTO SETTING

1. Photo Resolution: 20M/16M/12M/8M/5M Default setting is 20M.

2. White Balance: Auto/ Sunny / cloudy / Incandescent / Fluorescence Default setting is Auto. White Balance lets you adjust the color temperature cool or warm lighting conditions. When you change this setting, the IPS display immediately shows you the effect on your image.

3. Exposure Setting: -3 — +3
   Default setting is O. By default, your camera uses the entire image to determine the appropriate exposure level. However, EV lets you select an area that you want the camera to prioritize when determining exposure. This setting is particularly useful in shots where an important region might be over- or underexposed. When you change this setting, the IPS display immediately shows you the effect on your image. If you change modes, the camera returns to using the entire scene to determine the correct level of exposure.

4. Metering Mode: Average / Center / Spot / Matrix
   Default setting is Average. The metering mode refers to the way in which a camera determines exposure. Cameras generally allow the user to select between average, center, spot or matrix metering modes. The different metering modes allow the user to select the most appropriate one for use in a variety of lighting conditions.

5. Sharpness: High / Middle / Low
   Default setting is Middle. Sharpness controls the quality of details captured in your video footage or photos. When you change this setting, the IPS display display immediately shows you the effect on your image.

6. Long Exposure: Auto/ 2sec / Ssec / lOsec /15sec / 20sec / 30sec
   Default setting is Auto.
   Long Exposure is an exposure method that selects a slow shutter speed. Long exposures can make dark scenes clearer and get fantastic effects. Especially in night vision scenes such as starry sky or city night traffic, the camera can also take fantastic photos at night.
   Note:
   • If use Long Exposure function, Time Lapse Photo, Burst Photo and Self-Timer will not be available automatically.

7. ISO: Auto / 100 / 200 / 400 / 800 / 1600 / 3200 /6400 Default setting is Auto.
   ISO determines the camera’s sensitivity to light, and creates a trade-off between brightness and resulting image noise. Image noise refers to the degree of graininess in the image. In low light, higher ISO values result in brighter images, but with greater image noise. Lower values result in lower image noise, but darker images. When you change this setting, the IPS display immediately shows you the effect on your image.

8. Time Watermark: OFF/ON
   Default setting is ON. If you turn on Date Stamp, this camera adds date/time stamp to the photos you record. If you turn off Date Stamp, this camera will not add date/time stamp to the photos you record.

9. Diving mode: OFF/ON
   Default setting is OFF.
   Turn on Diving Mode, it can compensate for the lack of red light in underwater scenes. Diving Mode is designed to be used in tropical and blue water, optimized for use between 10 and 80 feet.

SYSTEM SETTING

1. Image Rotation: OFF/ON
   Default setting is OFF.
   This setting determines the orientation of your video or photos to help you prevent upside down footage.

2. Wi-Fi: OFF/ON
   Default setting is OFF.

3. Wi-Fi Information
   Wi-Fi ID: COOAU CU-SPC01
   Wi-Fi password: 1234567890

4. Reset Wi-Fi
   If you reset Wi-Fi in cam, this option can set the Wi-Fi data into factory setting. If you reset Wi-Fi in DV KING 4K app, the Wi-Fi name and password can be changed.

5. Light Source Frequency: Auto / 50Hz / 60Hz
   Default setting is Auto.

6. LED Indicator: OFF/ON
   Default setting is On.

7. Auto Screen Saver: OFF / 30s /1 min / 2min
   Default setting is 30s.
   Turns off the IPS display after a period of inactivity to save battery life. To turn on the IPS display again, press any button on the camera.

8. Auto Power OFF: OFF/ 3 Min / 5 Min / 10 Min.
   Default setting is 3 minutes.
   Powers off your camera after a period of inactivity to save battery life.

9. Button Prompt High / Middle / Low / OFF Default setting is Middle.

10.  Car mode: OFF/ON
    Default setting is OFF.
    If you turn on Car Mode and connect camera with car cigarette lighter, the camera will turn on automatically if you start your car and will turn off if you stop your car.

11. Waterproof Case Mode: OFF/ON
    Default setting is OFF.
    Before you install the cam in waterproof case, please open the waterproof case mode. Otherwise, you can’t change any settings after the cam locked. If you remove the  cam from the waterproof case, we suggest you to close this function.

12. Time Format: YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY
    Default setting is YYYY/MM/DD.
    If you turn on Time Watermark, this camera adds date stamp to the videos or photos you take. If you turn off Time Watermark, this camera will not add date stamp to the videos or photos you take.

13. Time Set hour/minute/second

14. Date Set year/month/day

15. Format To keep your micro SD card in good condition, reformat it on a regular basis. Reformatting erases all of your content, so be sure to offload your photos and videos first. To reformat your card, press the mode button to enter system setting, then select Format

16. Device Info: Product Model / Software Version / Update Time

17. Factory Reset Conform restore factory settings? Confirm/Cancel This option resets all settings to their default values.

CONNECTING TO THE DV KING 4K APP

The DV KING 4K app lets you control your camera remotely using a smartphone or tablet.
Features include full camera control, live preview, playback, download and sharing of content.

1. Download DV KING 4K app from Google Play or Apple Store.
2. Turn on the camera, press and hold down button for 3 seconds to turn on Wi-Fi.
3.  Turn on Wi-Fi of your phone, connect to the Wi-Fi SSID: “COOAU CU-SPC01-XXX(Independent serial number)”.
4. Enter the password: 1234567890.
5. Open the app DV KING 4K. Tap ”COOAU CU-SPC01”. You connect to the DV KING 4K app successfully.

OFFLOADING YOUR CONTENT TO A COMPUTER

To play back your video and photos on a computer, you must first transfer these files to a computer. Transferring also frees up space on your micro SD card for new content. To offload files to a computer using a card reader (sold separately) and your computer’s file explorer, connect the card reader to the computer, then insert the micro SD card. Then you can transfer files to your computer or delete selected files on your card. You can also offload files to a computer using a USB cable.
OFFLOADING YOUR CONTENT TO SMARTPHONE OR TABLET

1. Connect to the DV KING 4K app.
2. Open the DV KING 4K app. Tap ‘COOAU CU-SPC01’. Then tap the first icon at the bottom
3. Tap “Device” icon. 4. Tap the icon at the top of right corner, then select download, then select the file you want to download.
4. Tap “Confirm” , you download the files successfully to the phone of DV KING 4K app. If you want to save the files to phone photo album, please touch “phone”, then touch the file you want to save on the smart phone, finally touch the button in the upper right to save it.

Note: If you can’t save files to your phone successfully, please check if your phone give authority the DV KING 4K app to access photo.
After the app gets authority, the file still can’t be saved, please send your phone version and operation system version to us, we will help you solve it.

PLAYING BACK YOUR CONTENT

You can playback your content on the camera’s IPS display, your computer, TV, or smartphone/tablet.
You can also playback content by inserting the micro SD card directly into a device, such as a computer or compatible TV. With this method, playback resolution depends on  the resolution of the device and its ability to playback that resolution.
VIEWING VIDEOS AND PHOTOS ON CU-SPC01

1. Turn on camera.
2. Tap video file icon at the left corner of the screen to enter playback mode.
3. Tap video or photo file to playback video and photo in full-screen view.
4. To exit video or photo files, tap return icon .

Note: If your micro SD card contains a lot of content, it might take a minute for it to load.

DELETING VIDEOS AND PHOTOS ON YOUR CU-SPC01

Delete videos and photos with touch screen:

1. Tap file icon to enter playback mode. If your micro SD card contains a lot of content, it might take a minute for it to load.
2. Tap the video or photo file you want to delete
3. Tap , the screen shows “Are you sure delete files? Cancel/ Confirm”.
4. Tap “Confirm”. The selected file will be deleted.

Delete videos and photos with buttons:

1. In video or photo mode, press Down button to enter playback mode.lf your microSD, card contains a lot of content, it might take a minute for it to load.
2. press down button several times to locate the file you want to delete. Press shutter button. Then press and hold shutter button for 3 seconds . the screen shows are you sure delete files ? cancel / confirm
3. press down button then shutter button the selected file wi be deleted.

REFORMATTING YOUR MICROSD CARD

To keep your microSD card in good condition, reformat it on a regular basis reformatting frase all of your content , so be sure to offloadyour photos and videos first

1. Turn on COOAU CU-SPC01.
2. Enter System Setting.
3. Scroll through the screen to locate and tap “Format Card”.
4. tap confirm then you format your microsd card successfully.

MAINTENANCE YOUR CAMERA

Follow these guidelines to get the best performance from your camera:

1. For best audio performance, shake the camera or blow on the mic to remove debris from the microphone holes.
2. To clean the lens, wipe it with a soft, lint-free cloth. Do not insert foreign objects around the lens.
3. don t touch the lens with fingers
4. Keep the camera away from drops and bumps, which may cause damage to the parts inside
5. Keep the camera away from high temperature and strong sunshine to avoid being damaged.

MAXIMIZING BATTERY LIFE

if the battery reaches 0 % while recording . the camera saves the fileand powers of to maximize battery life , follow these guidelines when possible:

• turn off wireless connections
• Capture video at lower frame rates and resolutions
• Use Screen Saver setting.

BATTERY STORAGE AND HANDLING

The camera contains sensitive components, including the battery. Avoid exposing your camera to very cold or very hot temperatures.
Low or high temperature conditions may temporarily shorten the battery life or cause the camera to temporarily stop working properly. Avoid dramatic changes in temperature or humidity when using the camera, as condensation may form on or within the camera.
Do not dry the camera or battery with an external heat source such as a microwave oven or hair dryer. Damage to the camera or battery caused by contact with liquid inside the camera is not covered under the warranty.
Do not store your battery with metal objects, such as coins, keys or necklaces. If the battery terminals come in contact with metal objects, this may cause a fire. Do not make any unauthorized alterations to the camera. Doing so may compromise safety, regulatory compliance, performance, and may void the warranty.
WARNING: Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate or paint the camera or battery. Do not insert foreign objects into the battery opening on the camera. Do not use the camera or the battery if it has been damaged-for example, if cracked, punctured or harmed by water. Disassembling or puncturing the battery can cause an explosion or fire

MOUNTING YOUR CAMERA

Attach your camera to helmets, gear and equipment.

CONTACT US

 For any problem with COOAU products, please feel free to contact us, we will respond within 24 hours.
E-mail: support@cooau.com
Official website: www.cooau.com

References

• COOAU
• COOAU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>