My Velocity®/PowerGlide® Rewind Bagged Vacuum brush is not turning | Support
- June 7, 2024
- Bissell
Table of Contents
-
Turn off and unplug
-
Recline handle back as far as it will go
-
Flip over the machine so brush faces up
-
Remove access plate by removing the five screws and lift cover off
-
Grasp brush at both ends and lift out
- Clean any debris from brush, motor pulley, and belt areas
-
Check brush and belt for any damage
- Brush should spin easily by hand and belt should be intact
- If part is damaged, it will need to be replaced
-
Spin brush by hand when replacing in machine to center belt
-
If belts continuously break, adjust height of machine to ensure brush is rotating freely
- If brush is still not turning, please take the machine to a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
-
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>