HYTRONIK HBTD8200VFC Bluetooth Voltage-Free Contact Switch Instruction Manual
- June 6, 2024
- HYTRONIK
Table of Contents
HYTRONIK HBTD8200VFC Bluetooth Voltage-Free Contact Switch
Installation and Instruction Manual
Bluetooth Voltage-free Contact Switch
Technical Specifications
| Product type | Voltage-free Contact Switch(Flush mount) |
|---|---|
| Mains voltage | 220~240VAC 50/60Hz |
| Rated load | 24VDC@2A,48VDC@0.5A |
250VAC@4A
Stand-by power| NO<0.5W
Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| 4 dBm
Range (Typical)| 10 ~ 30m
Protocol| 5.0 SIG Mesh
Operation temperature| Ta: -20°C ~ +45°C
Case temperature (Max.)| Tc: +75°C
Storage temperature| -40°C ~ +70°C
Max. relative humidity| 10 ~ 90%
IP rating| IP20
Impulse withstand voltage| 2.5KV
Duty type| S1
Insulation material| PTI material group IIIa
Glow wire| level 3, 850°C
Protection| Built-in protection provide
Type of switch| Single load(Voltage-free Contact Switch)
Insulation| Class II
EMC standard (EMC)| EN55015, EN61547, EN61000-3-2, EN61000-3-3
Safety standard (LVD)| IEC 61058-1, EN 61058-1, IEC 61058-1-2
EN 61058-1-2, AS/NZS 61058.1
Radio Equipment (RED)| EN300 328, EN301489-1, EN301489-17, EN62479
Download the App
Free App for set-up and commissioning
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using
commercially available non-latching (momentary) wall switches. Detailed Push
switch configurations can be set on Koolmesh app.
| Switch Function | Action | Descriptions |
|---|
Push switch
| Short press (<1 second)
- Short press has to be longer than 0.1s, or it will be invalid.
| – Turn on/off – Recall a scene
– Turn on only – Exit manual mode
– Turn off only – Do nothing
Double push
| – Turn on only – Exit manual mode
– Turn off only – Do nothing
– Recall a scene
Long press (≥1 second)
| – Dimming
– Colour tuning
– Do nothing
Simulate sensor| /| – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor
Installation
Warnings:
- Installation must be carried out by a qualified engineer in accordance with local regulations.
- Disconnect power supply before installing.
- Ensure environmental conditions are suitable for electronic equipment
- Wiring Diagram
- Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensor ->Receiver Nodes
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy