MSI MAG META Series Personal Computer User Manual
- June 12, 2024
- MSI
Table of Contents
MAG META Series Personal Computer
Product Information
MAG META Series – Personal Computer
Model: META B930
Contents
- Windows 11 System Operations
- Power Management
- Network Connections
- System Recovery
Safety Instructions
- Revision: V4.0, 2021/12
Getting Started
Package Contents
- Personal Computer META B930
- Quick Start Guide (Optional)
- Documentation
- User Guide (Optional)
- Warranty Book (Optional)
- Power Cord
- Accessories:
- Mouse (Optional)
- Keyboard (Optional)
Safety & Comfort Tips
-
Choosing a good workspace is important if you have to work with
your PC for a long period of time. -
Your work area should have enough illumination.
-
Choose the proper desk and chair and adjust their height to fit
your posture when operating. -
When sitting on the chair, sit straight and keep a good
posture. Adjust the chair’s back (if available) to support your
back comfortably. -
Place your feet flat and naturally on the floor, so that your
knees and elbows have the proper position (about 90-degree) when
operating. -
Put your hands on the desk naturally to support your
wrists. -
Avoid using your PC in a place where discomfort may occur (such
as on the bed). -
The PC is an electrical device. Please treat it with great care
to avoid personal injury.
System Overview
META B930 (B550M-A PRO)
Component | Description |
---|---|
1. Power Button | Press the power button to turn the system on and off. |
2. Ventilator | The ventilator on the enclosure is used for air convection and |
to prevent the equipment from overheating. Do not cover the
ventilator.
3. Power Supply Switch| Switch this switch to I can turn on the power supply.
Switch it
to 0 to cut off the power circulation.
4. Power Jack| Power supplied through this jack supplies power to your
system.
5. Microphone Jack| This connector is provided for microphones.
6. Headphone Jack| This connector is provided for headphones or speakers.
7. USB 2.0 Port| This connector is provided for USB peripheral devices.
(Speed
up to 480 Mbps)
Important: High-speed devices are recommended
for USB 3.2 ports whereas low-speed devices, such as mouse or
keyboard, are suggested to be plugged into the USB 2.0 ports.
MAG META Series
Personal Computer
META B930
Contents
Getting Started……………………………………………………………………………………………….. 3 Package
Contents……………………………………………………………………………………… 3 Safety & Comfort Tips
……………………………………………………………………………….. 3 System
Overview……………………………………………………………………………………….. 4 Hardware
Setup………………………………………………………………………………………… 7
Windows 11 System Operations………………………………………………………………………. 9 Power Management
………………………………………………………………………………….. 9 Network Connections
………………………………………………………………………………. 13 System Recovery
…………………………………………………………………………………….. 21
F3 Hotkey Recovery (Optional) ………………………………………………………………………. 23 Safety
Instructions………………………………………………………………………………………… 24 Regulatory
Notices……………………………………………………………………………………….. 26
Revision V4.0, 2021/12
2 Contents
Getting Started
This chapter provides you with the information on hardware setup procedures.
While connecting devices, be careful in holding the devices and use a grounded
wrist strap to avoid static electricity.
Package Contents
Personal Computer META B930
Quick Start Guide (Optional)
Documentation
User Guide (Optional)
Warranty Book (Optional)
Power Cord
Accessories
Mouse (Optional)
Keyboard (Optional)
Important
Contact your place of purchase or local distributor if any of the items is
damaged or missing.
Package contents may vary by country.
The included power cord is exclusively for this personal computer and should
not be used with other products.
Safety & Comfort Tips
Choosing a good workspace is important if you have to work with your PC for a
long period of time.
Your work area should have enough illumination.
Choose the proper desk and chair and adjust their height to fit your posture
when operating.
When sitting on the chair, sit straight and keep a good posture. Adjust the
chair’s back (if available) to support your back comfortably.
Place you feet flat and naturally on the floor, so that your knees and elbows
have the proper position (about 90-degree) when operating.
Put your hands on the desk naturally to support your wrists.
Avoid using your PC in a place where discomfort may occur (such as on the
bed).
The PC is an electrical device. Please treat it with great care to avoid
personal injury.
Getting Started 3
System Overview
META B930 (B550M-A PRO)
56
7
1
89
2
3 4
4 Getting Started
10
11
12
13
14
7
15
16 17 18
1 Power Button
Press the power button to turn the system on and off.
2 Ventilator
The ventilator on the enclosure is used for air convection and to prevent the
equipment from overheating. Do not cover the ventilator.
3 Power Supply Switch
Switch this switch to I can turn on the power supply. Switch it to 0 to cut
off the power circulation.
4 Power Jack
Power supplied through this jack supplies power to your system.
5 Microphone Jack
This connector is provided for microphones.
6 Headphone Jack
This connector is provided for headphones or speakers.
7 USB 2.0 Port
This connector is provided for USB peripheral devices. (Speed up to 480 Mbps)
Important
High-speed devices are recommended for USB 3.2 ports whereas lowspeed devices,
such as mouse or keyboard, are suggested to be plugged into the USB 2.0 ports.
8 USB 3.2 Gen 1 Port (Type-C)
This connector is provided for USB peripheral devices. This connector can
provide up to 5V/3A of power. (Speed up to 5 Gbps)
9 Hard Disk Drive LED
This indicator shows the activity status of the HDD. It flashes when the
system is accessing data on the HDD and remains off when no disk activity is
detected.
10 HDMI-Out Port
The High-Definition Multimedia Interface (HDMI) is an all-digital audio/video
interface capable of transmitting uncompressed streams. HDMI supports all TV
format, including standard, enhanced, or high-definition video, plus multi-
channel digital audio on a single cable.
11 DVI-D Port
The DVI-D port supports monitors and other DVI-D interface devices.
Getting Started 5
12 PS/2® Keyboard Port
The PS/2® keyboard DIN connector for PS/2® keyboard.
13 PS/2® Mouse Port
The PS/2® mouse DIN connector for PS/2® mouse.
14 USB 3.2 Gen 1 Port
This connector is provided for USB peripheral devices. (Speed up to 5 Gbps)
15 LAN Jack
The standard RJ-45 LAN jack is provided for connection to the Local Area
Network (LAN). You can connect a network cable to it.
LINK/ACT LED
SPEED LED
LED Link/ Activity LED
Speed LED
Status Off Yellow Blinking Off Green Orange
Description No link Linked Data activity 10 Mbps 100 Mbps 1 Gbps
16 Mic-In Jack
This connector is provided for microphones.
17 Line-Out Jack
This connector is provided for headphones or speakers.
18 Line-In Jack
This connector is provided for external audio output devices.
6 Getting Started
Hardware Setup
Connect your peripheral devices to suitable ports.
Important
For detailed instructions on how to connect, please refer to the manuals of
your peripheral devices.
Reference image only. Appearance will vary.
Connect the power cord to the system and electrical outlet.
Power Rating · 500W: 100-240V~, 50-60Hz, 7-3A · 750W: 100-240V~, 50-60Hz,
10-5A
Switch the power supply switch to I.
Important
When unplugging the AC power cord, always hold the connector part of the cord.
Never pull the cord directly.
Getting Started 7
Press the power button to power on the system. 8 Getting Started
Windows 11 System Operations
Important
All information and Windows screenshots are subject to change without prior
notice.
Power Management
Power management of personal computers (PCs) and monitors has the potential to
save significant amounts of electricity as well as deliver environmental
benefits. To be energy efficient, turn off your display or set your PC to
sleep mode after a period of user inactivity. 1. Right-click [Start] and
select [Power Options] from the list. 2. Adjust [Screen and sleep] settings
and select a power mode from the list. 3. To choose or customize a power plan,
type control panel in the search box and
select [Control Panel]. 4. Open up [All Control Panel Items] window. Select
[Large icons] under [View by] drop-down menu. 5. Select [Power Options] to
continue. 6. Select a power plan and fine-tune the settings by clicking
[Change plan settings]. 7. To create your own power plan, select (Create a
power plan). 8. Select an existing plan and give it a new name. 9. Adjust
settings for your new power plan. 10.The [Shut down or sign out] menu also
presents power saving options for rapid and
easy management of your system power.
Energy Savings
The power management feature allows the computer to initiate a low-power or
“Sleep” mode after a period of user inactivity. To take advantage of these
potential energy savings, the power management feature has been preset to
behave in the following ways when the system is operating on AC power: Turn
off the display after 10 minutes Initiate Sleep after 30 minutes
Waking the System Up
The computer shall be able to wake up from power saving mode in response to a
command from any of the following: the power button, the network (Wake On
LAN), the mouse, the keyboard.
Energy Saving Tips: Turn off the monitor by pressing the monitor power button
after a period of user
inactivity.
Windows 11 System Operations 9
Tune the settings in Power Options under Windows OS to optimize your PC’s
power management.
Install power saving software to manage your PC’s energy consumption. Always
disconnect the AC power cord or switch the wall socket off if your PC would
be left unused for a certain time to achieve zero energy consumption.
1 2
3
10 Windows 11 System Operations
4 5
6
7 Windows 11 System Operations 11
8 9
10 12 Windows 11 System Operations
Network Connections
Wi-Fi
1. Right-click [Start] and select [Network Connections] from the list. 2.
Select and turn on [Wi-Fi]. 3. Select [Show available networks]. A list of
available wireless networks pops up.
Choose a connection from the list. 4. To establish a new connection, select
[Manage known networks]. 5. Select [Add network]. 6. Enter information for the
wireless network you intend to add and click [Save] to
establish a new connection.
1 2
Windows 11 System Operations 13
3 4 14 Windows 11 System Operations
5 6
Windows 11 System Operations 15
Ethernet
1. Right-click [Start] and select [Network Connections] from the list. 2.
Select [Ethernet]. 3. The [IP assignment] and [DNS server assignment] are
automatically set as
[Automatic (DHCP)]. 4. For a Static IP connection, click [Edit] of [IP
assignment]. 5. Select [Manual]. 6. Switch on the [IPv4] or [IPv6]. 7. Type
the information from your Internet Service Provider and click [Save] to
establish a Static IP connection.
1 2
16 Windows 11 System Operations
3
4
5 Windows 11 System Operations 17
6 7
18 Windows 11 System Operations
Dial-up
1. Right-click [Start] and select [Network Connections] from the list. 2.
Select [Dial-up]. 3. Select [Set up a new connection]. 4. Choose [Connect to
the Internet] and click [Next]. 5. Select [Broadband (PPPoE)] to connect using
DSL or cable that requires a user
name and password. 6. Type the information from your Internet Service Provider
(ISP) and click [Connect] to establish your LAN connection.
1
2
Windows 11 System Operations 19
3
4
5
6
20 Windows 11 System Operations
System Recovery
The purposes for using the System Recovery Function may include: Restore the
system back to the initial status of original manufacturer’s default
settings. When some errors have occurred to the operating system in use. When
the operating system is affected by virus and is not able to work normally.
When you want to install the OS with other built-in languages. Before using
the System Recovery Function, please back up the important data saved on your
system drive to other storage devices. If the following solution fails to
recover your system, please contact the authorized local distributor or
service center for further assistance.
Reset this PC
1. Right-click [Start] and select [Settings] from the list. 2. Select
[Recovery] under [System]. 3. Click [Reset PC] to start the system recovery.
4. The [Choose an option] screen pops up. Choose between [Keep my files] and
[Remove everything] and follow the on-screen instructions to complete your
system recovery.
1
2 2
Windows 11 System Operations 21
3 4 22 Windows 11 System Operations
F3 Hotkey Recovery (Optional)
Precautions for Using the System Recovery Function
1. If your hard drive and system encountered non-recoverable problems, please
use the F3 Hotkey recovery from the Hard Drive first to perform the System
Recover Function.
2. Before using the System Recovery Function, please back up the important
data saved on your system drive to other storage devices.
Recovering the system with the F3 Hotkey
Follow the instructions below to continue: 1. Restart the PC. 2. Press the F3
hotkey on the keyboard promptly when the MSI greeting appears on
the display. 3. On the [Choose an option] screen, select [Troubleshoot]. 4. On
the [Troubleshoot] screen, select [Restore MSI factory settings] to reset the
system to the default settings. 5. On the [RECOVERY SYSTEM] screen, select
[System Partition Recovery]. 6. Follow the on-screen instructions to continue
and complete the Recovery Function.
F3 Hotkey Recovery (Optional) 23
Safety Instructions
Read the safety instructions carefully and thoroughly.
All cautions and warnings on the device or User Guide should be noted.
Refer servicing to qualified personnel only.
Power
Make sure that the power voltage is within its safety range and has been
adjusted properly to the value of 100~240V before connecting the device to the
power outlet.
If the power cord comes with a 3-pin plug, do not disable the protective earth
pin from the plug. The device must be connected to an earthed mains socket-
outlet.
Please confirm the power distribution system in the installation site shall
provide the circuit breaker rated 120/240V, 20A (maximum).
Always unplug the power cord before installing any add-on card or module to
the device.
Always disconnect the power cord or switch the wall socket off if the device
would be left unused for a certain time to achieve zero energy consumption.
Place the power cord in a way that people are unlikely to step on it. Do not
place anything on the power cord.
If this device comes with an adapter, use only the MSI provided AC adapter
approved for use with this device.
Battery
Please take special precautions if this device comes with a battery.
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer.
Avoid disposal of a battery into fire or a hot oven, or mechanically crushing
or cutting of a battery, which can result in an explosion.
Avoid leaving a battery in an extremely high temperature or extremely low air
pressure environment that can result in an explosion or the leakage of
flammable liquid or gas.
Do not ingest battery. If the coin/button cell battery is swallowed, it can
cause severe internal burns and can lead to death. Keep new and used batteries
away from children.
European Union:
Batteries, battery packs, and accumulators should not be disposed of as
unsorted household waste. Please use the public collection system to return,
recycle, or treat them in compliance with the local regulations.
Taiwan:
For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
24 Safety Instructions
California, USA: The button cell battery may contain perchlorate material and
requires special handling when recycled or disposed of in California. For
further information please visit: https://dtsc.ca.gov/perchlorate/
Environment
To reduce the possibility of heat-related injuries or of overheating the
device, do not place the device on a soft, unsteady surface or obstruct its
air ventilators.
Use this device only on a hard, flat and steady surface. To prevent fire or
shock hazard, keep this device away from humidity and high
temperature. Do not leave the device in an unconditioned environment with a
storage temperature
above 60 or below 0, which may damage the device. The maximum operating
temperature is around 35. When cleaning the device, be sure to remove the
power plug. Use a piece of soft
cloth rather than industrial chemical to clean the device. Never pour any
liquid into the opening; that could damage the device or cause electric shock.
Always keep strong magnetic or electrical objects away from the device. If any
of the following situations arises, get the device checked by service
personnel: · The power cord or plug is damaged. · Liquid has penetrated into
the device. · The device has been exposed to moisture. · The device does not
work well or you can not get it working according to the User
Guide. · The device has dropped and damaged. · The device has obvious sign of
breakage.
Safety Instructions 25
Regulatory Notices
CE Conformity
Products bearing the CE marking comply with one or more of the following EU
Directives as may be applicable:
RED 2014/53/EU
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
ErP Directive 2009/125/EC
Compliance with these directives is assessed using applicable European
Harmonized Standards.
The point of contact for regulatory matters is MSI, MSI-NL Eindhoven 5706 5692
ER Son.
Products with Radio Functionality (EMF)
This product incorporates a radio transmitting and receiving device. For
computers in normal use, a separation distance of 20 cm ensures that radio
frequency exposure levels comply with EU requirements. Products designed to be
operated at closer proximities, such as tablet computers, comply with
applicable EU requirements in typical operating positions. Products can be
operated without maintaining a separation distance unless otherwise indicated
in instructions specific to the product.
Restrictions for Products with Radio Functionality (select products only)
CAUTION: IEEE 802.11x wireless LAN with 5.15~5.35 GHz frequency band is
restricted for indoor use only in all European Union member states, EFTA
(Iceland, Norway, Liechtenstein), and most other European countries (e.g.,
Switzerland, Turkey, Republic of Serbia). Using this WLAN application outdoors
might lead to interference issues with existing radio services.
CAUTION: Fixed outdoor installations for WiGig application (57~66 GHz
frequency band) are excluded in all European Union member states, EFTA
(Iceland, Norway, Liechtenstein), and other European countries (e.g.,
Switzerland, Turkey, Republic of Serbia).
Radio frequency bands and maximum power levels
Features
802.11 a/b/g/n/ac, BT
Frequency Range 2.4 GHz, 5 GHz
Modulation
FHSS, DSSS, OFDM
Power Output
10, 20, 23
Channel Bandwidth 1, 5, 20, 40, 80 MHz
26 Regulatory Notices
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the measures listed below: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the
receiver is connected. Consult the dealer or an experienced radio/television
technician for help. Notice 1 The changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment. Notice 2 Shielded interface cables and AC
power cord, if any, must be used in order to comply with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: this device may not cause harmful interference,
and this device must accept any interference received, including interference
that may
cause undesired operation. MSI Computer Corp. 901 Canada Court, City of
Industry, CA 91748, USA 626-913-0828
www.msi.com
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and Electronic
Equipment, Directive 2012/19/EU, products of “electrical and electronic
equipment” cannot be discarded as municipal waste anymore and manufacturers of
covered electronic equipment will be obligated to take back such products at
the end of their useful life.
Regulatory Notices 27
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
https://storage-asset.msi.com/html/popup/csr/evmtprtt_pcm.html
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950,
mandates that manufacturers provide material declarations for certain
categories of electronic products offered for sale after July 1, 2006. https
://storage-asset.msi.com/html/popup/csr/cemm_jp.html
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule
2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated
biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1
weight % and 0.01 weight % for cadmium, except for the exemptions set in
Schedule 2 of the Rule.
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey
Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved
by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008
1057, in terms of restrictions for the use of certain dangerous substances in
electrical and electronic equipment.
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with
Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a
number of hazardous substances in electronic and electric products.
28 Regulatory Notices
Green Product Features
Reduced energy consumption during use and stand-by Limited use of substances
harmful to the environment and health Easily dismantled and recycled Reduced
use of natural resources by encouraging recycling Extended product lifetime
through easy upgrades Reduced solid waste production through take-back policy
Environmental Policy
The product has been designed to enable proper reuse of parts and recycling
and should not be thrown away at its end of life.
Users should contact the local authorized point of collection for recycling
and disposing of their end-of-life products.
Visit the MSI website and locate a nearby distributor for further recycling
information.
Users may also reach us at gpcontdev@msi.com for information regarding proper
disposal, take-back, recycling, and disassembly of MSI products.
Upgrade and Warranty
Please note that certain components preinstalled in the product may be
upgradable or replaceable by user’s request. For any further information about
the product users purchased, please contact the local dealer. Do not attempt
to upgrade or replace any component of the product if you are not an
authorized dealer or service center, since it may cause the warranty void. It
is strongly recommended that you contact the authorized dealer or service
center for any upgrade or replace service.
Acquisition of Replaceable Parts
Please be noticed that the acquisition of replaceable parts (or compatible
ones) of the product users purchased in certain countries or territories may
be fulfilled by the manufacturer within 5 years at most since the product has
been discontinued, depending on the official regulations declared at the time.
Please contact the manufacturer via https://www.msi.com/support/ for the
detailed information about the acquisition of spare parts.
Regulatory Notices 29
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used
is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and
names mentioned may be trademarks of their respective owners. No warranty as
to accuracy or completeness is expressed or implied. MSI reserves the right to
make changes to this document without prior notice.
Technical Support
If a problem arises with your system and no solution can be obtained from the
user’s manual, please contact your place of purchase or local distributor.
Alternatively, please try the following help resources for further guidance.
Visit the MSI website for technical guide, BIOS updates, driver updates and
other information via https://www.msi.com/support/
30 Regulatory Notices
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>