Alza NV5100 Night Vision User Manual

: June 9, 2024
: alza

Table of Contents

Alza NV5100 Night Vision
INFORMATION
Intended Use
Product Overview
Specification
Install Batteries
- Inserting Memory Card
Changing The Modes
- Taking Pictures
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Alza NV5100 Night Vision

INFORMATION

Dear customer, Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line. www.alza.co.uk/kontakt +44 (0)203 514 4411 Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Intended Use

This device is intended only for recording digital photos and videos, particularly for observing wildlife. It is not intended for any other use or for uses extending beyond those stated. This device is not intended for use in commercial or industrial environments. The manufacturer accepts no responsibility for damage caused by failure to observe these instructions, improper use, incompetent repairs, making unauthorized modifications or for using unapproved replacement parts. The operator alone bears liability.

WARNING Do not use the product in violation of local laws and regulations. A user who violates local laws and ordinances will be held responsible for all consequences of purchasing and using the product. Alza.cz a.s. is not responsible for any violation of local laws and regulations by the user. When the equipment will be placed in the outdoor filming, rapid changes in the weather could lead to error record.

Product Overview

Specification

Photo Resolution| 3M(2048×1536)】 /2M(1600×12/

【1M(1280×960)】/【VGA(640×480)】

---|---
Video Resolution| 【1080P(1920x1080P@30FPS )】 /

【960P (1280 x 960 @30FPS )】/

【VGA(640×480@30FPS )】

Lens| F1.0 larger aperture, f=35mm, Auto IR filter
Lens Angle| 10.3°
Display Screen| Inner screen is 2.5” 640*480 TFT
Outer screen| 98x48mm,with 6X large window magnifier
Storage Media| Micro SD card, up to 32GB
USB Port| Micro USB 2.0
Auto off| 3 min/ 5 min/ 10 min/OFF
IR LED| 5W,850nm strong infrared spotlight ,7 grades infrared adjustment
Display brightness| 7 grades adjustable
View Distance In

Complete Darkness

| About350-400 meters
View Distance In

Low Light

| 1 meters～infinity
Digital Zoom| Digital Zoom 4X
Power Source| 8 * 2AA Alkaline battery, External 5V mobile

power supply

OSD Language| Multiple languages are optional
Date Stamps| Support to set date and time. Date and time

stamp on photo and video files

Operation

Buttons

| 6 buttons
Operation

Temperature

| -10°C to +50°C
Storage

Temperature

| -20°C to +60°C
---|---
Dimensions| approx. 196.3144.661.5mm
Weight| about 795g with battery

Install Batteries

Please install batteries into the device before using.
Open the battery cover on the back of device.
Insert 8 x 1.5V AA brand Alkaline batteries into the battery compartment. Make sure the polarity is correct.
Close the battery cover.

Inserting Memory Card

Please prepare a Class 10 Micro card (up to 32GB) in advance

Open the card slot cover, you will see the card slot.
Insert the Micro SD card into the slot. Make sure the direction is right. Never insert the card forcibly.
Format the Micro SD card,this can improve the compatibility of Micro SD card.
To remove the card from the memory card slot of the device, press the edge of the memory card in gently, the card will pop out. Then remove the card.

Note: If the TF card is not inserted or the card is not inserted correctly, the prompt icon of SD card and the number of photos or recording time will not appear on the screen when the machine is turned on. When pressing the shoot button, the prompt of “No card” will appear.

Basic operation Turn On And Turn Off Long press the POWER button for 3 seconds to turn on the device. Long press the POWER button to turn off the device. Watch the eyepiece / display screen and adjust the focus wheel according to the actual distance to focus until the screen is clear. If the light is insufficient or used in the evening, turn on the IR by pressing the IR Up/Zoom in/Up Button.Increase the brightness by pressing the button repeatedly.It has 7 levels of brightness (0〉1〉2〉3〉4〉5〉6〉7 〉0…) The brightness can be adjusted according to your needs. Long press IR up to zoom.

Changing The Modes

The night version has 3 different modes: photo mode, video mode and playback mode. Press the Mode button can change mode.

Taking Pictures

Turn on the device,the default is Video mode. Please press the Mode button to switch to photo mode.
Zooming: Keep pressing the Zoom + or Zoom – button to zoom in or zoom out the image the value of magnification level appears on the LCD screen.
Take a still photo. View your subject via the LCD screen.
- Adjust the focus by turning the focus wheel.

For night or insufficient light use,turn on the IR by pressing the IR Up/Zoom in/Up Button.Increase the brightness by pressing the button repeatedly.It has 7 levels of brightness(0〉1〉2〉3〉4〉5〉6〉7〉 0…)The brightness can be adjusted according to your needs.

Press the Shot button to take a photo.

1.	Camera mode	2.	Default high quality images
3.	Screen brightness gear	4.	Infrared light gear
5.	Battery status	6.	Photo Resolution
7.	Number of pictures that

can be taken

Turn on the device,the default is Video mode. If not, press the Mode button to switch to Video mode.
Zooming:
Keep pressing the Zoom+ or Zoom- button to zoom in or zoom out the image. The value of magnification level appears on the LCD screen.
Start to record video.
View your subject via the LCD screen.
Adjust the focus by turning the focus wheel
For night or insufficient light use,turn on the IR by pressing the IR button. Increase the brightness by pressing the button repeatedly.It has
levels of brightness (0〉1〉2〉3〉4〉5〉6〉7〉0…) The brightness can be adjusted according to your needs,darker and need adjusted more brightness.
Press the Shot button to start to record.The record duration will be shown on the LCD screen.
Finish recording.
Press the Shot button again to stop recording.
The device will stop recording automatically once capacity of the memory card is full.

Notice: Device Power Off If the device fails to activate, check for defective, missing or improperlyinstalled batteries. Replace or install batteries correctly. Please make sure to use only 8x AA Alkaline batteries.

Poor Image

If you wear glasses, please keep them on while using the device.
If at day, make sure the IR is off (if IR is on,screen is black and white or the screen is colored)
If at night, make sure you have turned on the IR,press IR up (if
IR is on,screen is black and white).
Adjust the focus by slowing turning the Focus wheel. Make sure it is focused.

IR – LED (Night vision function)

1. Regarding manual focusing: users can manually focus the focus wheel according to the actual observation distance to debug the best focus until the display is clear.
The video is silent.
In photo/video mode, if you have to view the darkness environment, please short press IR UP button to activate the IR LED, the image will change to black and white. The IR LED have seven levels, short press IR UP button to up the level, short press IR DOWN button to down the level.
Note: If the battery voltage is not enough, the IR LED level will down automatically. IR level can up to 7 levels when the battery power is full.
If only left half power, the level just can up to 5. If only left 25% power, the level just can up to 3. If the battery power is lower than 25%, IR LED cannot be activated.

Settings in Photo and Video Mode Press Menu button in photo or video mode, can change the settings.

Menu	Function

Photo Resolution

| Set the photo resolution.

Options: [3M(2048×1536)] /[2M (1600 x 1200)] / [1M 1280×960] /[VGA 640×480]

Video Size

| Set the video resolution.

Options: [FHD 1920X1080 ][960 1280×960]/

[640 640×480].
---|---
Night vision sensitivity| Choose the night vision sensitivity. Options: [Low] /[Middle] / [High].
Burst| Options: [Off]/[On]

Lcd Bright

| User can according to their need to adjust the brightness of the Lcd screen.

Options: [Level 7] / [Level 6] /[Level 5] / [Level 4]/[Level 3]/[Level 2]/[Level1].

Power Frequency

| Set the light source frequency to match frequency of electricity supply in local region to prevent interference. Options:[50Hz]/[60Hz].

Power Save

| Set the time to shut down the device for power

saving if the device is idle.

Options: [3min]/[5min]/[10min]/[OFF].

Date&Time| Set the date and time of device.

Date Stamp

| Add the date stamp on the photo or video files. Options: [Off]/[Date]/[Date&Time].

Language

| Set OSD (on-screen) language.

Options: [English] / [Simplified Chinese]/ [Traditional Chinese] / [Francais] / [nederlands] /[Espanol]

/[Italiano] /[Portugues] /[Deutsch]/ [Pyccknn]/

[Japanese]/ [Korean].

Format

| Format your TF card. Format TF card will delete all files including the protected files. Please copy the important files before confirm.

Options: [Yes] /[No].

---|---
Reset All| Restore the setup to factory default settings.

Options: [Yes] /[No].

FW Version| User can see the firmware version information.

Playback

Turn on the device, press the Mode button to switch to playback mode.
Press Up/Down button to view photos and video files.
Playback the video
- Press the Shot button to start playing the video files.
- Press the Shot button again to have a pause.
- Press Menu button to stop the current video playing.
- Press Menu button in playback mode,the screen will display the playback menu.Press Up/Down button to scan lock or delete. And press Shot button to select one to enter the sub-menu.

Playback menu list :

Menu	Function
Lock	Lock or unlock the current one file or all files in memory

card.Options:[Lock/Unlock onel]/[Lock All]/ [Unlock All].
Delete| Delete the current one file or delete all files in memory card.Options: [One]/[All].

Download files to PC

There are two ways to download files from the device to a computer:

By inserting the memory card into a card reader.
By connecting the device to a computer using the supplied USB cable.

Using a Card Reader

Eject the memory card from the device and insert it into a card reader. Then connect the card reader to a computer.
Open [My Computer] or [Windows Explorer] and double-click the removable disk icon that represents the memory card.
Copy images from the card into a directory of your choice on the computer’s hard disk.

Connecting the Device to a PC through the USB Cable

Turn on the night vision. Connect it to a computer through the supplied USB cable.
When connecting to the computer, it will appears “MSDC” on the screen.
Open [My Computer] or [Windows Explorer]. A”Removable Disk” appears in the drive list. Double-click the “Removable Disk” icon to view its contents. Files stored on the camera are located in the folder named “DCIM”.
Copy the photos or files to your computer.

NOTES on Cleaning Before cleaning the device, disconnect it from the power supply (remove batteries) ! Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid. Clean the eyepieces and/or lenses only with a soft, lint-free cloth, (e.g.microfibre cloth). To avoid scratching the lenses, use only gentle pressure with the cleaning cloth. Protect the device from dust and moisture. Store it in a bag or box. Remove the batteries from the device if it is not used for a longer time.

Warranty Conditions A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object
intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity Identification data of the manufacturer’s / importer’s authorized representative.

Importer: Alza.cz a.s. Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Trail Camera
Model / Type: NV5100

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. 2014/30/EU
Directive No. 2011/65/EU as amended 2015/863/EU

WEEE This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.