YI YHS6020 Dome U Pro Security Camera User Guide
- June 6, 2024
- YI
Table of Contents
YI YHS6020 Dome U Pro Security Camera
What’s in the box
Getting to Know Your Camera
Pairing your Camera
Prerequisite
- Ensure that your cell phone is connected to a 2.4 GHz Wi-Fi network.
- Download the YI Home App from the Apple App Store or Google Play.
- Register a YI Home account or log on to an existing YI account.
Installation
Step 1
Connect the power adapter to an outlet to activate the camera. The camera
indicator will flash yellow and you will hear the introductory message
“Welcome to YI home”, followed by “Waiting to connect”. When you hear “waiting
to connect”, tap “I heard waiting to connect”.
Note : To install a camera that is previously installed on a different
network or if you change your password, you must reset your camera. Press the
reset button that is located at the bottom of the camera.
Step 2
Log into the YI Home App, you can tap the “+” sign to select your device or
scan the camera QR code with your phone.
Step 3
Enter the password of the same Wi-Fi network that is connected to your phone,
then use the YI Dome U Pro Camera to scan the QR code that will be generated.
Step 4
Tap “Next Step”. You will hear “Pairing is successful” and then the YI Dome U
Pro Camera is ready to use.
Pan/Tilt/Zoom (PTZ) Angle
Range of Activity:
Pan 0° – 350°, tilt up 53°, tilt down 10°.
Zoom Directly from the livefeed on your YI Home App
Mounting Your Camera
Prerequisite:
- Ensure that the camera is facing the desired direction prior to mounting.
- Ensure that the included USB
Secure the mount with screws
Step 1
Use the included screws to install the camera mount on a flat ceiling.
Step 2
Install the camera by twisting and locking it into the mount base.
Switching Wi-Fi Networks
When you need to switch Wi-Fi networks or update your Wi-Fi password, follow the instructions below:
- Restore your camera to its default settings by inserting a paper clip or reset pin into the camera’s Reset Port.
- Open the YI Home app on your phone, and connect the camera to your phone again. Your videos stored on your MicroSD card will not be affected.
Important Safety Guidelines
- Read these instructions carefully.
- Clean only with a dry cloth.
- This camera is for indoor use only.
- Only use the attachments/ accessories specifed by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- To get the best usage out of this product, please consistently update to the latest versions of our app and Frmware.
Go to: https://www.yitechnology.com/Frmware/
Specifications
- Maximum Resolution: 19201080
- Lens: Wide-Angle
- Audio: Built-in Mic and Speaker
- Photographic Enhancement: 3D Digital Noise Reduction,
- Distortion Correction
- Wi-Fi: 802. 11b/g/n, 2.4 G Hz
- Alert Modes: Human Detection, Motion Detection, Face Detection
- Night Vision: IR Cut+ Non-invasive Infrared LEDs Support Platforms: Android, iOS, Mac & PC
- Wireless Encryption: WEP/WPA/WPA2
- USB Cable Length: 2 Meters
- Power Supply: DC 5V/1A
- Power Consumption: 3.5W
- Pan/Tilt: 350° horizontally, tilt up 53°, tilt down 10°.
- Storage: MicroSD Card and YI Cloud Storage
- Operating Temperature: 14°F to 122°F
References
- Kami Community - Official Kami Community. Ask questions, get answers and connect with your fellow Kami users.
- YI Technology
- YI Technology
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>