HAMRON 619550 Workshop Press 10 Ton Instruction Manual

USER INSTRUCTIONS FOR WORKSHOP PRESS 10 TON
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).

JU IA AB, BOX 363, SE-532 24 VARA
202112-21 0 Jula AB

EU DECLARATION OF CONFORMITY
Item number
619550

Hamaron
Jula AB.Box 363. SE- 532 24 SKARA.SWEDEN

AEI, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the manufacturer.

WORKSHOP PRESS
TY10003 10 TON
Conforms to the following directives, regulations, and standards:

This product was CE marked in a year: -14

Tobias Hammer BUSINESS AREA MANAGER (Signatory for Jula and authorized to compile the technical documentation. (Undertecknat Icir Jula samt betiding alt sammanstalla den tekniska dokumentationer

SAFETY INSTRUCTIONS

Read the operating instructions carefully before use. Save them for future reference.
WARNING: The warnings and instructions in these operating instructions do not cover all potential circumstances and situations. The operator must use and maintain the workshop press with due care and attention, and exercise sound judgement.

• Pay attention to the safety instructions and warnings. Only use the product for the purpose for which it is intended. All other use can result in personal injury and/or material damage.
• The press has been designed to make it safe to use, but nevertheless, there are contingent risks. Warnings cannot replace the sound judgement of the user.
• Steel and other materials can splinter. Always wear approved safety glasses and other safety equipment.
• Stop working with the press immediately and carefully inspect it in the event of a material fracture.
• Fasten the press to the floor if it is to be used on bulky or unstable objects.
• Do not compress springs and other similar items.
• Damaged parts must be repaired or replaced by an authorised service technician.
• Keep the press clean.
• Do not overload the press. Do not subject the workpiece to excessive pressure and always use the pressure gauge to determine the applied pressure.
• Only use the press for its intended purpose.
• Keep children and unauthorised persons away from the work area.
• Do not wear loose-fitting clothing. Do not wear a tie, watch, rings and other loose items of jewellery. Tie up long hair.
• Wear approved safety glasses, face protection and work gloves when using the workshop press.
• Keep a firm footing and do not overreach. Wear non-slip shoes.
• Only use the press on a surface that is stable, level, dry, and not slippery, and which can support the weight. Keep the surface and the work area clean and tidy. Make sure the work area is well lit.
• Always check the press before using it. Do not use the press if it is deformed, defective, cracked, leaking, or otherwise damaged. Check suspicious parts and parts that have been knocked.
• Check that all the nuts and bolts are correctly tightened.
• Check that the workpiece is properly secured in the middle.
• Keep your hands and feet away from the workspace on the press.
• Do not use the press to compress springs or other objects that can come loose and cause personal injury. Never stand directly in front of the press or leave it unattended when it is under pressure.
• Never use the press if you are tired or under the influence of alcohol, drugs or medication.
• Never allow unqualified persons to use the press.
• Never modify the press.
• Never use brake fluid or other unsuitable liquid and avoid mixing different types of oil when filling hydraulic oil. Only use good quality hydraulic oil.
• Do not expose the press to rain.
• Repairs and/or the replacement of parts must only be carried out by an authorized service technician. Only use original spare parts.

DESCRIPTION

INSTALLATION

• Use the exploded view for installation.
• Layout all the parts in front of you before starting the installation.

USE

The workshop press is intended for straightening, eccentric pressing, die pressing and forming, for example, crankshafts, connecting rods, and for press fitting of axles, gears and bushings.

WARNING: Read, understand, and apply the safety instructions and warnings before use.

BEFORE USING IT FOR THE FIRST TIME

• Before using the workshop press for the first time the hydraulic system must be bled.
  — Open the valve by turning it anticlockwise.
  — Pump several times to remove all the air from the system.

• Check all the parts. Do not use the workshop press and contact the supplier if any part is defective.

HOW TO USE

1. Place the intermediate plate on the press platform and position the workpiece on the plate.
2. Close the valve by turning it clockwise.
3. Pump with the handle until the knurled saddle comes to the workpiece.
4. Align the workpiece and hydraulic cylinder so that the pressure comes in the middle.
5. Pump with the handle to press the workpiece.
6. Stop pumping when the pressing is done. Release the pressure from the workpiece by carefully turning the valve anticlockwise in small steps.
7. Remove the workpiece from the press platform when the hydraulic cylinder is fully withdrawn.

MAINTENANCE

• Clean the outside of the press with a dry, clean and soft cloth and lubricate the joints and moving parts at regular intervals with thin oil,
• Store the press in a dry place with the hydraulic cylinder and piston fully withdrawn when the press is not in use.
• Bleed the hydraulic system according to the above description if the compression capacity is reduced.
• Check the hydraulic oil:
  — Remove the oil filler nut on the top of the container.
  — Fill up with high-quality hydraulic oil when necessary and replace the oil filler nut.
  — Bleed the hydraulic system.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>