Shenzhen Feihe Electronics U13Q LED Desk Lamp with Wireless Charging User Manual

Feihe Electronics U13Q LED Desk Lamp with Wireless Charging
User Manual Please read it carefully before using

Important

Thank you for purchasing our products.
To guarantee your rights, please fill in this form properly, Thank you
Name…………..
Address……………………
Telephone…………….
Invoice number……………
Purchase date…………..
Item number………….
Dealers……………
Note: this field requires the dealer’s seal!
Warning please keep this warranty paper for repair presentation

Attention

• Do not self-disassemble the product.to avoid any electroshock.
• Please use the supplier’s specified adapter and power socket, to maintain normal working
• Please do not over-adjusting the joint activity parts, to avoid any damage to the lamp.
• Please do not put the lamps on the unstable desk to avoid the lamps dropping out.
• Please do not put the lamp in a high temperature or high-humidity environment.
• Please do not look at the LED light source straightly, to avoid your eyes hurting.
• In case the below conditions occur. please pull out the power cord, stop using it.
• If needed. please call for support staff:
• The power cord or power plug break
• The lamp holder damp or rain
• The shell and joint activities of the lamp holder breaks
• The lamp holder smokes or sparks
• The abnormal flickering or break of the LED light bulb

SPECIFICATIONS

Natural Light:4200K 土 400K

Applicable for

• Since buying date. the user enjoys one year of free repair services under normal use. After one year. will be charged according to each component part cost.
• In case change component part. will be charged according to our company’s component part cost list
• The following situations are not free repair In warranty period

1. Damage caused by natural earthquakes.rat disaster. and unnormal use.
2. Damage caused in transportation, fall, and unproper storage.
3. Consumable component.such as spare parts,batteries,light bulbs,etc.
4. Warranty information records is not complete.no purchase date, no buying shop seal. etc
5. Featured using environment. such as humidity, sulfur area, high salty and the ship, etc, easy corrosion area
6. Using not according to the instructions. ?)Special offer.

• When returning to the factory for repair, the user should make sure the LED lamp is packed properly to avoid any damage during transportation.
• Factory not responsible for the damages caused by the user themself unproper disassemble

FUNCTION

• Smart wireless charger, it can charge the smartwatches and cell phones which is QI wireless charging standard
• High-quality imitated leather design can be used for a long time.
• Advanced precision etching technology, to show more realistic imitated leather effection.
• Touchable sliding for brightness, make it more convenient.
• 5-grade brightness meets different lighting requirements
• 3 color temperatures to choose from.(Cold Light, Warm light, Natural light)t * Calendar.

USE MANUAL

• Insert the adaptor head into the socket behind the lamp
  【 Notice】 The power supply in the box is only for his lamp, forbid to use in other electrical appliances

• The range of activity for the lamp:

• The lamp arm can be fold-able to a 90° angle

• Please hold the lamp base when you adjust the lamp arm angle

• Lamp head can be fold-able to 150′ angle (It may be broken if you over-adjust)

REPLACEMENT BATTERY

Before you change the battery press the battery case and push down it Then inserts 1pcs new battery and closes the battery case into the right position
DISPLAY SCREEN BRIGHTNESS ADJUSTMENT

• Once you connect the power adapter the screen will default the highest brightness
• Then press this key and choose the suitable brightness you like
• 3 step brightness adjustment

OPERATION GUIDE

Touch switch operation :(see the drawing)

Date and Time setting

1. In normal mode. press to enter setting functions. press again to move next, sequence :
   Hour-Minute-year-Month-Day.

2. Press ∧ or ∨ adjust the setting of date and time, and the week updates automatically when the date changes.

3. In setting mode, press M or no operation in one minute to exit the setting, and return to the lime display.

4. In normal mode, press to switch between 12H and 24H display.

Alam and Snooze setting

1. In normal mode, press M to enter the alarm setting.

2. ln alarm mode, press   to set alarm time, press again to move next, sequence:
   Hour-Minute-Snooze-Music-Exit

3. Press ∧ or ∨ adjust the setting of alarm time, snooze time, and music of alarm.

4. ln alarm mode, press∧ or ∨ to turn on/off alarm and snooze function:
   Press once to tum on the alarm, twice to turn on the alarm and snooze mode, a third time to tum both of them off

5. When the alarm activates with snooze mode turned on, it rings for one minute before entering snooze mode. It will ring again based on the snooze time you set. Press any button turn off the alarm and snooze.

6. When the alarm activates without snooze mode turned on, it rings for one minute and shuts off until the same time the next day.

Temperature switch
In normal mode, press ∨ the key to switch between “F” and “C’display.
WIRELESS CHARGING INSTRUCTIONS
Put phone with QI technical standard on the lamp base surface for charging, once light indicator turns to red and phone screen shows connecting that phone means charging successfully; If the phone doesn’t show connecting status, please check phone whether put to U,e wireless charging area correctly, or put phone on the base again, if still no working, kindly check the devices whether with QI technical standard.

The lamp indicator light in red means that the phone is charging status

The red light flashing and start charging
The green light will light up when the mobile phone is in full charge.
The cell phone battery symbol will also display a full charge state.
(Only own function of wireless charging of mobile devices have a state of a charge indicator function, there is no indicator function if the mobile the phone is equipped with a receiver when charging)

FCC Statement

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>