AIRTHINGS 2950 Wave Radon Smart Detector Instructions

AIRTHINGS 2950 Wave Radon Smart Detector

Product Information

The product is a radio transmitter and receiver designed to
measure and monitor air quality. The device complies with various regulatory standards in different countries, including Canada, USA, Singapore, Australia & New Zealand, Japan, Malaysia, Thailand, India, United Arab Emirates, EU, and UK.

Regulatory Information

• Canada: The device complies with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). The antenna must be installed and operated with a minimum distance of 20 cm between the radiator and your body.
• USA: The device complies with part 15 of the FCC Rules. The antenna must be installed and operated with a minimum distance of 20 cm between the radiator and your body.
• Singapore: The product complies with IMDA standards.
• Australia & New Zealand: The product complies with ACMA-RCM and RSM-Standards.
• Japan: The product complies with MIC and Telec Regulations.
• Malaysia: The product complies with MCMC Regulations.
• Thailand: The product complies with NBTC Regulations.
• India: The product complies with WPC Standards.
• United Arab Emirates: The product complies with TDRA and MoIAT Regulation.
• EU: The product complies with EU Directives.
• UK: The product complies with UK Statutory Instruments.

Model Specifications

• Hub Cellular (Model 2820) – Space Hub: FCC ID: 2APPT-2820 IC: 23900-2820 includes Bluetooth, SmartLink, Cellular Modem Space Hub 9F FCC ID: 2APPT-2821 IC: 23900-2821

General Safety and Maintenance

Users should keep the device away from water and avoid exposing it to extreme temperatures. Regular cleaning with a soft cloth is recommended. If there are any issues with the device, users should contact customer support for help.

Product Usage Instructions

To use the device, follow these steps:

1. Place the device in a location where air quality is to be monitored.
2. Ensure that the antenna is installed and operated with a minimum distance of 20 cm between the radiator and your body.
3. Turn on the device and connect it to a power source.
4. Download the Airthings app on your smartphone or tablet.
5. Connect the device to the app via Bluetooth or SmartLink.
6. The app will display air quality readings and provide recommendations for improving air quality.

REGULATORY INFORMATION

Regulatory information Canada

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• This device complies with Innovation, Science and Economic Development Canada’s license- exempt RSS(s). Operation is subject to the following two conditions:
  1. This device may not cause interference
  2. This device must accept any interference, including interference that may cause undesired operation of the device.
• RF exposure safety. This product is a radio transmitter and receiver. It is designed not to exceed the emission limits for exposure to radio frequency (RF) energy set by the ISED. The antenna must be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• CAN ICES-3 (B)/NMB-3(B)
• This Class B digital apparatus complies with Canadian ICES-003

Regulatory information USA

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
• Class B device notice. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.
• RF exposure safety. This product is a radio transmitter and receiver. It is designed not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission.
• The antenna must be installed and operated with a minimum distance of 20 cm between the radiator and your body.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Regulatory information Singapore
Airthings products for sale in Singapore comply with IMDA standards

Regulatory information Australia & New Zealand
Airthings products for sale in Australia and New Zealand comply with ACMA-RCM and RSM-Standards

Regulatory information Japan
Airthings products for sale in Japan comply with MIC and Telec Regulations.

Regulatory information Malaysia
Airthings products for sale in Malaysia comply with MCMC Regulations.

Regulatory information Thailand
Airthings products for sale in Thailand comply with NBTC Regulations.

Regulatory information India
Airthings products for sale in India comply with WPC Standards.

Regulatory information United Arab Emirates
Airthings products for sale in UAE comply with TDRA and MoIAT Regulation.

Regulatory information EU
Airthings products for sale in EU comply with EU Directives. The full text of the EU Declaration of Conformity is available upon request.

Regulatory information UK
Airthings products for sale in UK comply with UK Statutory Instruments. The full text of the UK Declaration of Conformity is available upon request.

General safety and maintenance

• Airthings products are not intended for use at potentially hazardous areas such as at fuel depots, chemical plants and blasting sites. This product is intended for indoor use only. Avoid direct exposure to sunlight for long periods. Avoid exposure to direct heat sources. For correct usage, make sure the monitor is operating in the specified temperature range (see technical specifications for individual products). Exposure to high humidity might permanently alter the monitor sensitivity or damage it. Do not disassemble.
• If the monitor does not work as specified or you are in doubt, contact your local dealer or visit us at Airthings.com. Use a dry cloth to clean the monitor. When replacing the batteries, pay attention to the polarity marks. Always snap the mounting bracket to the monitor’s rear side to protect the batteries, even when the monitor is not permanently mounted. Disposal: electronic equipment.

Model Specifications

• Hub Cellular (Model 2820) – Space Hub FCC ID: 2APPT-2820 IC: 23900-2820 includes Bluetooth, SmartLink, Cellular Modem
• Space Hub 9F FCC ID: 2APPT-2821 IC: 23900-2821 includes SmartLink, Cellular Modem
• Space Hub 8F includes SmartLink, Cellular Modem Hub (Model 2810) FCC ID: 2APPT-2820 IC: 23900-2820 includes Bluetooth and SmartLink
• Wave Radon – Wave 2 (Model: 2950) / Wave Plus – Space Plus (Model: 2930) FCC ID: 2APPT-2930 IC: 23900-2930
• Model 2950 & 2930 include Bluetooth and SmartLink Wave Mini (Model: 2920)
• FCC ID: 2APPT-2920 IC: 23900-2920
• Model 2920 includes Bluetooth and SmartLink
• View Plus (Model: 2960), View Pollution (Model: 2980) and View Radon (Model: 2989) share FCC ID:
• 2APPT-2960 IC: 23900-2960 and include Bluetooth, SmartLink and 802.11b/g/n (2.4GHz) WiFi
• View Plus for Business – Space Pro (Model: 2969) and View CO2 for Business – Space CO2 (Model: 2968) both have FCC ID: 2APPT-2969 IC: 23900-2969 and include Bluetooth and SmartLink
• Space CO2 Mini (Model 311 and 312) include Bluetooth and SmartLink FCC ID: 2APPT-312 / 2APPT-312B
• IC: 23900-312 / 23900-312B
• Model AT-313, AT-314, AT-321 and AT-322 include Bluetooth and FSK based protocols like SmartLink
• Model AT-314: FCC ID: 2APPT-314 and IC: 23900-314 Model AT-322: FCC ID: 2APPT-322 and IC: 23900-322
• ISM Frequency Bands and Output Power
• Frequency Range for Bluetooth, Thread and  802.11b/g/n WiFi is 2400.0 – 2483.5 MHz
• Output power for Bluetooth and Thread is <5 mW Output power for 802.11b/g/n WiFi) is <50 mW
• Frequency Range and output power per region for SmartLink and other 50kbps-FSK protocols
• Europe, UK and UAE: 868 – 870 MHz, <25 mW North America: 902 – 928 MHz, <25 mW
• Singapore, Hong Kong, Malaysia, Thailand: 920 – 923 MHz, <25 mW
• Japan: 923 – 928 MHz, <20 mW
• Australia and New Zealand: 923 – 928 MHz, <25 mW India: 865 – 867 MHz, <25 mW

Cellular Modem

• Hub 2820 GSM Frequency Range: GSM 900 MHz, GSM 1800 MHz, GSM 850 MHz, GSM 1900 MHz.
• Hub 2820 LTE Cat M1 Frequency Range: LTE B1 2100 MHz, LTE B2 1900 MHz, LTE B3 1800 MHz, LTE B4 1700 MHz, LTE B5 850 MHz, LTE B8 900 MHz, LTE B12 700 MHz, LTE B13 700 MHz, LTE B18 850 MHz, LTE B19 850 MHz, LTE B20 800 MHz, LTE B26 850 MHz, LTE B28 700 MHz, LTE B39 1900 MHz.
• Hub 2820 Output Power: < 200mW

Limited liability

• The instruments are tested and quality-assured by production. They meet the accuracy values set out in the specifications. It is recommended to keep the instruments constantly activated and the batteries in place until drained. Airthings ASA shall not be liable for damages related to failure or loss of data arising from incorrect operations and handling of the instruments.
• Terms & conditions can be found on airthings.com/terms-use-privacy/
• For additional questions go to support.airthings.com
• The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Airthings is under license.
• Copyright Airthings ASA, 2023

Class 1 Laser information

(View Plus – Space Pro / View Pollution)
Classified as Class 1 Laser products per IEC60825-1 Ed. 3. These devices comply with 21 CFR 1040.10 and 1040.11, except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Caution: These devices contain one or more lasers. Use other than as described in the user guide, repair, or disassembly may cause damage, which could result in hazardous exposure to infrared laser emissions that are not visible. This equipment should be serviced by Airthings or an authorized service provider.

Power Supply

(Hub / Space Hub)
The Hub (Model 2810) and Hub Cellular – Space Hub – Space Hub 8F – Space Hub 9F (Model 2820) contain power supplies tested according to the following standards: UL62368-1, EN62368-1, BS62368-1, AS/NZS62368-1 and tested to comply with FCC standards for home or office use CAN ICES-3 (B)/NMB-3(B). The power supplies are certified by TUV Süd / Rheinland. Separate power supplies for products supporting India are BIS certified.

References

• Airthings | Smart indoor Radon & Air Quality Monitors | Airthings
• Airthings | Terms of use
• Airthings Help Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>