RISUN MOTOR UKC-1 Sine Wave Controller Connection Instruction Manual
- June 5, 2024
- RISUN MOTOR
Table of Contents
Sine Wave Controller Connection Manual
1. Power Supply: XT60 Male Plug (Yellow)
Controller Side
XT60 Male Plug (Yellow)
Red: Positive
Black: Negative| Battery Side
Red: Positive
Black: Negative
---|---
2. Motor Cable 3-Phase Connection: “O” Ring Connection on Controller 3-Phase
Controller Side
Yellow: A Phase
Blue: C Phase
Green: B Phase| Motor Side
Yellow: A Phase
Blue: C Phase
Green: B Phase
---|---
3. Motor Cable Hall Sensor Connection: White DJ7061Y-2.8-21 Female Plug
Controller Side
DJ7061Y-2.8-21 Female (White)
Red
White
Black
Yellow
Green
Blue| Motor Side
DJ7061A-2.8-11 Male
Red
If your motor has internal speed detector hall sensor, please plug this,
otherwise just keep it empty.
Black
Yellow
Green
Blue
---|---
If you want motor rotate as reverse direction with original speed, then just need to change setting via computer or mobile phone: “Parameter Setting–MOTOR–Motor Rotate Direction”, change value as 0 or 1
4. LCD Control Panel Connection: Black SM-5A Male plug
Controller Side
SM-5A Male (Black)
Red
Blue
Black
Green
Yellow| LCD Side
SM-5A Female
Red
Blue
Black
Green
Yellow
---|---
If you don’t want to use LCD, please just plug the jumper connector as follow photo (connect red and blue):
5. Throttle Connection: Black SM-3Y Female Plug
Controller Side
SM-3Y Female (Black)
Red
Black
Green(Signal)| Throttle Side
SM-3Y Male
Red
Black
White or other color(signal)
---|---
6. Electric Lock: White 2.8B-2 Female plug
Controller Side
DJ7021Y-2.8-21 Female (White)
Red
Pink
If you use your own throttle and without electric lock, then please just loop as follow photo:
7. Brake Levers Connection: 2 x Black SM-2Y Female plugs
Controller Side
2x SM-2Y Female (Black)
Black
Brown
8. PAS Connection: Black SM-3A Male plug
Controller Side
SM-3A Male (Black)
Red
Black
White (Signal)| PAS Side
SM-3A Female
Brown
Black
Yellow(Signal)
---|---
9. Speed Limit Connection: Black SM-2Y Female plug
Controller Side
SM-2Y Female (Black)
Blue
Blue
If you want to active definite value speed limit at any time, please set speed limit value via computer or mobile phone (set percentage of full speed), and then install a switch on handlebar, you can active or cancel speed limit through this switch.
10. Alarm Connection: Red DJ7021A-2.8-11 Male, Red DJ7021Y-2.8-21 Female
Plugs
Controller Side
DJ7021A-2.8-11 Male (Red)
Red (Power input Positive)
Black (Power input Negative)
DJ7021Y-2.8-21 Female (Red)
Yellow
Brown
Blue
11. Head Light Connection: Black SM-2A Male (Black) plug
Controller Side
SM-2A Male
Red
Black| SM-2Y Female
Your switch/head light positive wire
Your head light negative wire
---|---
12. Bluetooth Connection:
DJ7031A-2.8-11 Male (White) + DJ7031Y-2.8-21 Female (White)
Controller Side
DJ7031A-2.8-11 Male (White)
Yellow
Green
Brown| DJ7031Y-2.8-21 Female (White)
Yellow
Green
Black
---|---
-
Connected:
If you use colorful display, please connect both plugs (please check below photo). -
Disconnected:
If you use Bluetooth module and not use colorful display, please disconnect both plugs (please check below photo).
13. USB Data Cable Connection:
-
Connect with computer via USB Adapter Cable
-
Connect with mobile phone via Bluetooth module