TESLA 40Q300BF Full HD LED TV User Guide

TESLA 40Q300BF Full HD LED TV

Safety Warning

Before operating the unit, please read through this manual.

PLACEMENT

• Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf.
• Do not oxposo-tho- unit to diroct: sunlight and othnr sourcns of hoat
• Do not handle liquids near or on the unit
• Never spill liquid of any kind into the unit
• Do not put the unit near appliances that create magnetic fields.
• Do not put hoavy objoct,, on top of tho urnt.

TEMPERATURE

• Do not place the unit near or over a radiator or a heater register.
• If your unit is ddenly moved from a cold to a warm place, unplug the power cord for at least two hours so that moisture that may have formed inside the unit can dry completely.

HUMIDITY

• Do not expose the machine in rain1 damp or place near water.
• Ensure the indoor drying, is cool.

VENTILATION

Keep the ventilation openings clear.

PREPARATION FOR YOUR NEW1V

Check Accessories Check the accessories that are packed with your 1V. Check the accessories that are packed with your 1V.

• LED 1V
• Remote Control + Batteries
• 1V Stand Base+ 4 Screws
• User’s Manual, Warranty Card

Stand Installation Guide

The 1V is packaged with the 1V stand separated from the cabinet. To setup the 1V table stand, please

1. The panel can be scratched easily, so please: Place a soft cloth on the table and place the 1V face down on the cloth.
   Note: Always unplug the AC cord first when installing/removing the stand.carry out the installation according to the instructions below.

2. Take the base. Please align the screw holes of the base and the 1V, and then insert the screws into the holes on the base and tighten them.
   Note: To ensure that the 1V is stable, please lock all screws.

WALL MOUNTING (IF AVAILABLE)

• I VESA(mm)
  • 40″; 200 X 200
  • 43″; 200 X 200

TV JACKS EXPLANATION

• VGA: Connect the PC.
• PC AUDIO IN: Connect the audio output of the PC.
• SCART: Connect to receive the signal from your antenna or cable via coaxial cable.
• RF: Connect to receive the signal from your antenna or cable through a coaxial cable. HDMI: (High-Definition Multimedia Interface) Provides an uncompressed digital connection. OPTICAL: Digital TV sound output.
• Cl: Cl card reader.
• MINI AV: Connect the Audio/ Video output jack of the DVD or VCR.
• MINI YPbPr: Connect the YPbPr output jack of the DVD or VCR.
• USB: Connect the USB device such as the flash disk to access the TV media function. EARPHONE: Connect a 3.5 mm headset for personal audio.

SIDE KEYPAD AND FRONT PANEL

• POWER (c! >) /OK: In the off mode, Short press to turn on the 1V. In the on mode, Short press to achieve OK function, long press to achieve POWER function.
• POWER (c! >): Turns the 1V on and off.
• OK: Enter and confirm.
• VOL-: Decreases the volume. In the 1V menu system, it acts like the left arrow on the remote control and can be used to select menu options.
• VOL+: Increases the volume. In the 1V menu system, it acts like the right arrow on the remote control and can be used to select menu options.
• MENU/CH-: Short press to achieve CH- function, long press to achieve MENU function.
• MENU: Displays the 1V Main Menu.
• CH-: Scans down through the channel list. In the 1V menu system, it acts like the down arrow on the remote control and can be used to select menu options.
• INPUT/CH+: Short press to achieve CH+ function, long press to achieve INPUT function.
• INPUT: Displays the Source Select List.
• CH+: Scans up through the channel list. In the 1V menu system, it acts like the up arrow on the remote control and can be used to select menu options.

Front Panel

Power/Standby Indicator: Blue and red dual-color LED. It shows red when the 1V is turned off and blue when turned on. Remote Control Sensor: Remote control lR sensor, which receives infrared ray sent by remote control.

Power/Standby Indicator Remote Control Sensor

REMOTE CONTROL INSTRUCTIONS

Inserting Batteries in the Remote

1. Rornovn tho batt:fHY cornpartrnont: color from the back of the- rnrnoto control by lifting the cover,
2. Insert 2 AM batteries. Make sure the polarities(+and-) are aligned correctly.
3. Put the cover back.

If the .mote control doe, not wort., check the points:

• Are the polaritie•; ( +, ) correct?
• Arn thn battering-sworn out?
• Is there an AC power failure?
• Is the power cord plugged in?
• Is them any interference or block near the remote control sensor?

CAUTION:

• Used batteries should be recycled.
•  KHnp out of childrnn’s rnach.
• DO NOT use new and old batteries together.
• Change both the batteries at the same time.
• When not using the remote control for a long time, remove the batteries from the unit.

Warning: All batteries (packed or in use) must not be exposed to high temperatures like sun heat or fire.

Remote Control Reception Angle

Usn your unknown control within tho distance and angle rango shown below.

REMOTE CONTROL BUTTONS

• POWER: Turns the lV on or switches it to Standby.
• MUTE: Reduces the lV volume to its minimum level. Press again to restore the volume.
• NUMBER BUTTONS: Press 0-9 to select an lV channel directly when you are watching TV. “-/–“:Set up the digit of channel .
• Recall( <;’.:>): Returns to the previous channel.
• AUDIO: Switch the audio channel in DVD or multimedia mode.
• FAV-./FAV+.: Scan up or down through the current favorite channel list. FAY: Show favorite channel list.
• CH+ or CH-: To access the next or previous channels.
• VOL+ or VOL-: Increases or decreases the lV volume.
• P. MODE: Switches between the preset picture mode.
• S.MODE: Switches between the preset sound mode.
• INPUT: Accesses the available input channels, Use the arrows to highlight options, and press OK to select.
• SLEEP: Selects the sleep timer, after which the lV will shut off automatically.
• ASPECT: Switches between the preset screen size mode.
• INFO: Press to display the current program information on the screen. Arrows(◄ /►/ Ji,,,, /T): Uses the four arrows to highlight different items in the lV menu or change the value.
• OK: Enter and confirm button.
• MENU: Accesses the Main Menu, or return to the upper level of a sub- Menu
• EXIT: Exits the current menu or function.
• TEXT: To enter Teletext rnode. Teletext is not broadcast in New Zealand. INDEX: To display the index page.
• MIX/T: lV and TXT picture are mixed together in transparent background. Press to activate Time Shift function in Digital lV mode, for delayed viewing.
• REVEAL: Teletext mode-To reveal or hide the hidden words.
• HOLD: Teletext mode-Hode current page which is display. SUBPAGE: Sub-coded page access.
• SIZE: Change the size of display in Teletext mode.
• CANCEL: To cancel the display.
• SUB-T: Display caption information
• TV/RADIO: Switch between lV and radio. (Used for models with DlV function only)
• REC: Presonal video record button. A USB memory device must be connected to the USB port for recording.
• EPG: Shows Electronic Program Guide.
• RED/GREEN/YELLOW/BLUE: Use add-on functions in OSD menu. fi Ml • Stop and play or pause media files;  Fast review and fast forward.   Select the previous or the next media file.

NOTE:

• All pictures In this manual are examples, only for reference, actual product may differ from the pictures.
• The buttons not mentioned here are not used.

BASIC OPERATIONS

Turning On and Off Connect the AC cord to power the 1V. At this time the 1V will enter standby mode and the power indicator will turn red. Use Power button(<!>) on the side panel of1V or on the remote control to turn on the 1V. After switching off the 1V for 5 seconds, you can turn on 1V again.

Adjust the OSD Screen

•  Press the MENU button to display the MAIN 05D MENU;
• Press◄/► button to select the MENU you want;
• Press OK button to enter the submenu, and press MENU button to return back to the previous menu.
• Press the… /T button to select the option and then press OK button to enter the submenu, press◄/► button to adjust the value or press◄/► button to select in the sub-menu;

Select input source

• Press INPUT button to display the input source list;
• Press the… /T button to select the input source you want to watch;
• Press OK button to enter the input source.

Menu Setting

Press MENU button to display the MAIN OSD MENU:

• Channel: Used for channel searching and edit, it’s only available in 1V input. You can choose to automatically search, or choose to manually search according to your needs.
• Picture: Used for1V picture effect adjusting. For example: Picture mode, colour temperature and so on.
• Sound: Used for1V sound effect adjusting. For example: Sound mode, Balance and so on.
• Time: Used for1V time effect adjusting. For example: OSD Time, Sleep Time and so on.
• Setup: Used for1V additional options. For example: OSD Language, Reset and so on.
• Lock: Used for1V Lock effect adjusting. For example: System Lock, Channel Lock and so on.
  Note: When the “Lock” function is set, if the System Lock is on, please input the password to unlock, default password is 0000.

For more settings, please refer to the menu settings.

OSD MENU OPERATIONS

Media Operation

Note: Before operating the MEDIA menu, Plugin USB device or memory card. Press ..i. /’If button to select Media Player in the Home Page, and then press “OK” button to enter. You can browse multimedia files by selecting PHOTOS, MUSIC, MOVIE or TEXT. Then press the “Mr’ button to start playing.

1. Press/button to select the option that you want to adjust in the Media menu, then press OK or ► button to enter.
2. Press ◄/► button to adjust or press  /’If the button to select.
3. After finishing your adjustment, press the MENU button to save and return back to the previous menu and press EXIT button to exit the entire menu.

TROUBLESHOOTING

If there are any problems when using the product, please consult the list below. If the list does not solve the problem, call our Customer Service Center Immediately.

Problem

Tho TV can’t be turned on.

| solution

Mako ,,urn tho AC cord Is plumiod In.

. Check the wall outlet, make sure the AC output works normally and stably.

. Select the Key Lock function In the OP IION Menu and press OK to uncheck the locking status.

---|---
No picture or sound but the IV is on and there is a “No Signal” sign-on screen.| Are you trying to use an Input source with no device connected to It? For using another video/audio device, make sure the external device

.. works normally first, then press Source and choose the right Input

source.

I ho signal type option may bo sot incorrect ly.

The channel may be blank. Try to search the channel again or change. another channel.

The sound rs fine, but the picture

is poor,

Thorn · is no sound, but: the picture is flnfL

| If you can only get black and white pictures from an external device that you’ve connected to your TV maybe It Is due to the video cables Is not

. connected well, or they are connected wrongly. Check the connection stability first, then check the correctness.

For AV input, the yellow video cable connects to the yellow Video In jack on the side of your TV For Component input, the three Y,

. Pb, Pr video cables (red, blue, and green) should be connected to the corresponding input jacks on the side of your TV.

.. Check the antenna connections. Make sure all of the cables are firmly connected to the IV jack on side of your IV.

Try adjusting tho color to improve.

. Tho sound bo rented. Try pressing tho MUTE button to restore

sound.

For using AV or Component, remember to connect the device’s left and right audio output correctly. The left channel cable is white and the right

.. channel cable is red. Please match the cables and 1acks according to

their colors.

The sound settings may not be set correctly.

If your audio source has only one jack or is a (mono) audio source, make sure you have plugged the connection into the Audio In I jack

. (white) on the IV.

The buttons on the side panel don’t work.| Unplug the IV from the AC power for 10 minutes and then plug it back.

. Turn the IV on and try again.

Ihe IV turns off unexpectedly.| rhe electronic protection circuit rnay have been activated because of  a power surge. Wait 30 seconds and then tum the IV on again. If this happen•; frequently, the voltage in your hoi.l’;e may be abnormal. If the

other electronic equipment in your home can’t work normally, consult a

. qualified service personnel.

rho Rnrnote control doesn’t work| Something might be blocking between the remote cont1ol and the

.. remote sensor on the front panel of the TV. Make sure there is a clear path.

The n:-;1rnotn may not bo airr1od directly at: tho TV,

The batteries in the remote may be weak, dead, or installed incorrectly. Put new batteries in the remote.

PRODUCT SPECIFICATIONS

Environment

| Working temperature: 5°C~45°C Working humidity: 20%~80% RH Air pressure: 86 kPa – 106 kPa

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>