Brace Direct ROM Knee Brace for Osteoarthritis Instructions
- June 13, 2024
- Brace Direct
Table of Contents
Brace Direct ROM Knee Brace for Osteoarthritis
Application
HOW TO USE
Step 1 : Detach all buckles and set each strap to its loosest setting for
first time application .
Step 2 : While seated with the knee at a 90° angle, place condyle pad on
the outside center of the knee directly on the skin or a knee sleeve .
Step 3 : Ensure strap 1 is above the calf and adjust strap length for a
secure fit . Strap 1 placement is key to preventing sliding .
Step 4 : Fasten straps 2, 3 and 4 and adjust strap length for a secure
fit .
Step 5 : Using hex tool, insert into the slot above the hinge and turn
counterclockwise for medial (inner) pain and clockwise for lateral (outer)
pain .
Step 6 : Test by walking . Additional adjustments can be made until the
maximum pain relief is acheived.
Step 7 : Range of motion stops- use only if you need flexion/ extension
control. Use the screwdriver to loosen the screws . Insert desired stop into
hinge . Tighten screw back into place.
Cleaning Instructions
Spray with a 50% water/ 50% alcohol solution and allow to dry.
Air dry only. Avoid heat, sun and bleach when cleaning and drying this
product.
Occasionally apply lubricant to the hinge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>