NN BEN NEVIS Ultra thin 13 Digit Watch Movement User Manual
- June 16, 2024
- NN BEN NEVIS
Table of Contents
Operations Manual for Ultra-thin 13-digit Watch Movement
Function descriptions:
- 13-digit display: hour, minute, second, month, date, day of week, with animation for ten o’clock
- Time in a second time zone
- 12/24-hour systems are optional. (Under the normal time mode, press Button C to switch between 12/24-hour systems)
- Alarm clock and hourly chime: Daily, fixed-day, fixed-month and monthly alarm clocks are optional. The alarm clock sounds for 10s. It has snooze function. Once this function is enabled, the alarm clock will sound 7 times, once every 5 minutes.
- With hourly chime.
- With 1/100s stopwatch function, time can be recorded at intervals. The maximum reading of the stopwatch is 23:59:59.
- EL backlight (adjustable)
- Upper limit on countdown is 24h.
Operating Instructions:
-
EL backlight: Press Button A. Then, the backlight will be on and delayed for 3s.
-
Stopwatch mode:
Under the normal time mode, press Button B twice to enter the stopwatch mode.
Press Button C once to start timing. Pressing Button C again to stop and show the reading.
Press Button D to reset the stopwatch. At last, press Button B 3 times to return to the normal time mode. Time may be recorded at intervals. -
Alarm clock mode:
Under the normal time mode, press Button B to enter the alarm clock mode (ALM). Press and hold Button D for 2s, and the hour will flicker. Press Button C to adjust hour, minute, month and date respectively.
Enable hourly chime:
Under the normal time mode, press Button B once to enter the alarm clock mode.
Press Button C to enter hourly chime setting. By pressing Button D, SIG will show up, which means hourly chime has been enabled.
Setting time in a second time zone:
Under the normal time mode, press Button B three times to enter a second time zone.
DL will be displayed on the screen. Press and hold Button D for 2 s, and hour will flicker.
Then, press Button B, and minute will flicker. By pressing Button C, hour and minute are adjustable respectively. Next, press Button D, and the digits on the screen will stop flickering. At last, press Button B twice to return to the normal time mode.
Normal time setting:
Under the normal time mode, press and hold Button D for 2s, and second will
flicker.
Then, press Button B to switch to time, minute, year, month and date in
succession. By pressing Button C, hour, minute, year, month and date will be
adjusted respectively. (day of week is set automatically)
- Countdown setting:
Countdown may be set from 1 min to 24h. At the time of countdown to zero, the alarm clock will sound.
Under the normal time mode, press Button B four times to enter countdown setting, and TR will be displayed on the screen.
Setting countdown start time
- After the countdown timer interface is displayed, press and hold Button D until hour of countdown starts flickering. This means hour can be set. By pressing Button B once, minute will flicker.
- When hour or minute is flickering, the value can be set by pressing Button C. If countdown start time is 24h, please set it to 0:00 00.
- Exit from the setting interface by pressing Button D once.
Application of countdown timer
After countdown timer interface is displayed, the countdown timer will start
once Button C is pressed.
-
When it counts down to zero, the alarm clock will sound for approximately 15s.
At this moment, press any button to stop the alarm clock from sounding. Then, countdown will automatically return to the original start time. -
Countdown can be suspended by pressing Button C and resumed by pressing Button C again.
-
To completely stop countdown, press Button C to suspend countdown first, and then press Button D. At this moment, countdown will return to the original start time.
-
If the countdown timer is not stopped, countdown will continue despite exiting from the countdown timer interface.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>