WARING WDB600 Professional Extra Burners Instructions

June 6, 2024
WARING

WAring

WARING WDB600 Professional Extra Burners

WARING-Professional-Extra-Burners

For your safety and continued enjoyment of this product, always read the instruction book carefully before using.

IMPORTANT SAFEGUARDS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following

GROUNDING INSTRUCTIONS

For your protection, Waring® Commercial Cast-Iron Extra Burners
are equipped with a 3-conductor cord set that has a molded 3-prong grounding- type plug, and should be used in combination with a properly connected grounding-type outlet as shown in Figure 1.WARING-Professional-Extra-
Burners-1

If a grounding-type outlet is not available, an adapter, shown in Figure 2, may be obtained so that a 2-slot wall outlet can be used with a 3-prong plug. As shown in Figure 3, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate.
CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded.
NOTE: Use of an adapter is not permitted in Canada.

SHORT CORD INSTRUCTIONS

A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
If a longer, detachable power-supply cord or extension cord is used, (1) the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and (2) the longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.

PARTSWARING-Professional-Extra-Burners-2

  1. Large cast-iron burner and burner ring
  2. Small cast-iron burner and burner ring
  3. Adjustable temperature control
  4. ON/OFF power switch
  5. Ready indicator light
  6. Nonskid feet

OPERATION

Before plugging in your extra burner, check to ensure that the electrical circuit is not overloaded with other appliances. This unit should always be operated on a separate 120 volt 60 Hz AC circuit. Be certain that your extra burner is resting level on the countertop. There is one burner ring on the WEB300 and two burner rings on the WDB600. The large burner plates are rated at 1300 watts. The smaller burner is rated at 500 watts. Use the larger burner for fast cooking, such as boiling water, and use the smaller burner for simmering or warming.
NOTE: Avoid using pans that are unstable and easily tipped.

CARE AND CLEANING

Reasonable care will ensure many years of service from your unit. Avoid dropping items on the burner rings and solid burners.

  1. Turn temperature control dial(s) to MIN. Press power switch to off position.
  2. Always unplug unit from the electrical outlet and allow to cool before cleaning.
  3. Never immerse unit in water or other liquids.
  4. For easy cleaning, the burners are sealed. Do not attempt to separate burners from the unit.
  5. Use a damp, soft cloth or sponge to clean the surface of the solid burners, burner rings, nonskid feet and housing unit.Never use harsh abrasive or steel wool pads on any part ofthe burner as they may scratch the surface or damage the unit.
  6. Thoroughly dry burners and burner rings.
  7. There are no user-serviceable parts. Any servicing other than cleaning should be performed by an authorized service center
    IMPORTANT: Any servicing requiring disassembly other than the above cleaning must be performed by an authorized service center.

Trademarks or service marks of third parties used herein are the trademarks or service marks of their respective owners.
©2017 Waring Commercial 314 Ella T. Grasso Ave.Torrington, CT 06790
www.waringcommercialproducts.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

WARING User Manuals

Related Manuals