JOOWIN JW-WR758AC-UKWS-08 Repeater WiFi 1200Mbps 08 Instructions
- June 6, 2024
- JOOWIN
Table of Contents
JOOWIN JW-WR758AC-UKWS-08 Repeater WiFi 1200Mbps 08
INSTALLATION
-
When you get the product, please turn on the power switch and connect the power.
-
After connected power, the reset button(the biggest LED circle) and the middle light will turn on solid blue as below:(See the Picture 1)
-
About 30s-60s, all lights will turn into solid blue, then please go to the wifi list of your device, find the JOOWIN_XXX_2G or JOOWIN_XXX_5G and connect it. (See the Picture 2)
-
After you connected the JOOWIN wifi, the settings page will pop up,if not pop up,please open the browser and type the IP address 192.168.10.1, enter the password: admin and click SET PASSWORD.(See the Picture 3)
(When you connect the IP,please confirm that you have connecting to the Wi-Fi “JOOWIN_XXX_2 G” or “JOOWIN_XXX_5 G” Otherwise, it cannot access the IP ) -
After you log into it, it will take about 15s-30s to scan the wifi around you, then you can see the wifi list after scanning:(See the Picture 4)
-
Please choose your wifi that you want to extend and enter the password on Pre-Shared Key. The password should be same as your router’s. (Please confirm that your router’s password have not the special character and suggest you to paste the password on it.)
-
Then please click Save Setting. It will begin to set up the extended wifi, please wait for 30s. (See the Picture 5) While you see the Configuration is in effect, please reconnect network. It means set up successfully, then please go to your wifi list and choose the new extended wifi to connect.(See the Picture 6)
-
The new extended wifi will be your wifi name+2G or 5G. For example, if your wifi name is Russ, the extended wifi name will be Russ-2G, Russ-5G.
PS
Here is the function explaining about “combine wifi” and “Sync your device”
- Combine wifi: T his function can automatically choose the fast channel for you, if you turn on this function, the extended wifi name will be your wifi name-2G&5G.
- Sync your device: This function can Sync your wifi, the extended wifi name will be as same as your wifi name. If you turn on this function, you can’t log into the IP address 192.168.10.1 to change the setting unless you reset the wifi extender.
How do I know that the repeater set up is successfully?
please go back 192.168.10.1 and login to the setting page and check if you
have set up the repeater successfully.(See the Picture 7)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>