REDRAGON Fizz Pro 3-Modes Mechanical Gaming Keyboard Instruction Manual

Dear user
Thank you for choosing the product. To protect your rights and for better customer service, please read the following warranty rules carefully.

1. Within 18 months of the purchase date, the repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into the water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquakes are not included.
2. Consumable parts (such as foot pads) and spare parts replacement are not included in our warranty.

OS support

Windows XP/Vista/Win7/Win8/Win10

How to connect the keyboard with a computer

Wired Connection

1. Slide the 24G/OFF/BT switch on the bottom of the keyboard to OFF,
2. Take out the US8 A to US8 Type C cable in the package and connect the keyboard with your computer,
3. The computer will recognize and configure the keyboard automatically.
4. The keyboard will be ready for use when the configuration is finished.
5. Once the keyboard is powered up, charging begins. The LED marked with M light s on red. It will turn white when the keyboard is fully recharged.

2.4G Wireless Connection

1. Slide the 2.4G/OFF/BT switch on the bottom of the keyboard to 2.4G.
2. Take out the nano USB receiver and plug it into an available USB port on your computer. The computer will recognize and configure the keyboard automatically.
3. The keyboard will be ready for use when the configuration is finished.
4. In some cases, you may need to pair the keyboard. Turn on the keyboard and press [FN1]+[2.4G] for about 3 seconds, the LED marked with M flashes in green, plug the USB receiver into any available USB port on your computer within 20 seconds. The keyboard will be paired automatically. Make sure the keyboard has enough power before doing so.
5. The indicator will flash when the battery is low. Please recharge the keyboard in time or it will turn off automatically soon.

Bluetooth Connection

1. Slide the 2.4G/OFF/BT switch on the bottom of the keyboard to BT.
2. Press (FN1J+[BT1J(or [BT2]/[BT3] for other Bluetooth devices), the LED marked with M flashes in blue (or cyan/magenta for the others)
3. Turn on Bluetooth and scan for available devices on your computer or smartphone. It will find BT3.0KB 0r BT5.0 KB device. Select it and it will connect automatically.

Function Introduction

1. With standard US8 and 2.4G/BT connections, the keyboard can be used on a computer without any software or driver installation.
2. There are 20 backlight effects:
3. Commands of key combinations with [FN] key
   FN+ESCI:| [FN+B] F8
   ---|---
   [FN+1]: Fl| [FN+9] F9
   [FN+2]: F2| [FN+OJ· FO
   [FN+3]: F3| [FN] + [Win]: Disable or enable the [Win] key.
   [FN+4] F4| [FN] + [Ql: Select Bluetooth device one (for Bluetooth connection)
   [FN+5]: F5| [FN] + [WI: Select Bluetooth device two (for Bluetooth connection).
   [FN+6]: F6| [FN] + [E]: Select Bluetooth device three (for Bluetooth connection)
   [FN+7]. F7| FN] + [R]: Change to 2.4G wireless connection. Press and hold the [FN]+[4] for 3 seconds to pair the keyboard with its receiver.
   FN+P-PRTSC| FN+;=PGUP
   FN+[[=HOME| FN4-PGDN
   FN+]]=END| FN+.>=INSERT
   FN+P=DELETE
4. Commands of key combinations with [FN2] key
   [FN2]+[F8]: Change backlight mode. There are 20 backlight effects.
   [FN2]+[F9]: Change backlight color.
   [FN2] + [F10]: Turn On or Off the backlight.
   [FN2] + [F11]: Decrease the backlight brightness of the keyboard.
   [FN2] + [F12]: Increase the backlight brightness of the keyboard.
   [FN2] + [Z]: Slow down the running speed of the backlight.
   [FN2] + [X]: Add up the running speed of the backlight.
   FN2+A/S/D/we+I4/-»]+
   FN2 + [CapsLK]: Set the keyboard to default setting.

How to set the backlighting

Press FN2+Backspace to get start setting, AW SD keys default in green color in the moment, Press FN2+Backspace again, CapstK is flash in Red in the moment, press desired  key for color setting, the single key color is Red/green/blue/yellow/purple/Cyan/white/OFF by each click, fix the color you want, press FN2+Backspace again to save the setting,  press FN2+8 to quit the setting mode

How to charge the keyboard

Find the US8 A to USB type C cable in the packaging, plug the keyboard and connect it with a computer for charging, the LED indicator of the keyboard will turn to red.  Remark: The LED indicator will be turn to red when keyboard is out of battery.

Indicators on keyboard up of left

A”is for Capitals lock indication
Mis for connection mode indication

FAQ

1. Ifthe keyboard doesn’t respond, please check if the keyboard’s US8 cable is correctly inserted into the corresponding US8 port on the computer, or try another US8 port on the computer.
2. If you spill liquid on the keyboard, please remove the keyboard US8 cable from the computer immediately. Wipe up excess liquid and put the keyboard in a warm place (for instance, under a lamp) to let the keyboard dry naturally before using it again.

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the
  receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please scan here to download the user manual

http://qr24.cn/DJAjNg

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>