anslut 008731 Work Lamp Instruction Manual

anslut 008731 Work Lamp

INSTALLATION

SAFETY INSTRUCTIONS

• Do not look directly into the light when it is switched on.
• Never point the beam at the eyes of people or animals.
• Store out of the reach of children.
• Can be used indoors and outdoors, but do not immerse in water or any other liquid.
• Do not charge the product outdoors -this will not comply with protection rating IP65.
• The switch must be in the off position during charging, otherwise this can damage the light.
• Never cover the lens or refiector when in use.
• Do not attempt to replace the battery.
• The product must be discarded if the glass front is cracked.
• The LED light source is not replaceable. When the light source has reached the end of its useful life the complete product must be replaced.

SYMBOLS

• Read the instructions
• Approved in accordance with the relevant directives.
• Recycle discarded product in accordance with local regulations

TECHNICAL DATA

• Battery 3.7 V/4400 mAh
• Output 5/1 W
• Protection rating IP54
• Luminous flux 500/100 Im
• Charging time Approx. 5 h
• Run time Max 3.5/12 h
• Operating temperature -10-40°

DESCRIPTION

1. Car spotlight
2. Main spotlight
3. Switch
4. Hook (rotational 360 °)
5. Clips
6. Charging connector
7. Magnetic mount (adjustable 90 °) FIG. 1

USE

HOW TO USE

Press the switch to switch on and off.

CHARGING THE BATTERY

• The battery must be charged before using for the first time.
• Connect the charger to the charging connector.
• The battery charge status is shown when the indicator is red. When the battery is fully charged the indicator goes green.
• The battery should be charged every three months to maintain its capacity.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>