PROZIS GEOD Flip Lamp User Manual

: June 6, 2024
: PROZIS

Table of Contents

Legal compliance statement
Safety warnings
PACKAGE CONTENTS
CLEANING AND MAINTENANCE
STORAGE
INSTRUCTIONS
How to charge
Warranty statement
GENERAL CONSIDERATIONS
WARRANTY PERIOD
HOW TO MAKE A CLAIM
WARRANTY REPAIRS
EXCLUSIONS
LIMITED RESPONSIBILITY
Documents / Resources

GEOD Flip Lamp User Manual
Warranty statement
V.1 01/2021 1

PROZIS is a registered trademark of PROZIS.COM, S.A.
PROZIS reserves the right to adjust or modify the product or any of the associated documentation in order to ensure its suitability for use, at any time and without prior notice.
The most recent version of this product’s user manual can be found at www.prozis.com/user-manuals

Legal compliance statement

By means of this document, PROZIS declares that the God Flip Lamp is fully compliant with all the standards specified in the applicable legislation as well as other relevant clauses.
Prozis will always be available for any additional explanation through our customer support communication channels, available at www.prozis.com/support
To avoid any impact on the environment or on human health due to dangerous substances present in electrical and electronic devices, the end-users of such devices are expected to understand the meaning of the symbol consisting of a crossed-out waste container. Do not dispose of waste electrical and electronic equipment along with the unsorted household waste. Dispose of it separately and properly instead.
The packaging that protects the device against transport damage is made from non-polluting materials that can be disposed of via local recycle bins.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Safety warnings

DANGER! This symbol, when combined with the note Danger, means high risk. Failure to observe this warning may lead to injury to life and limb.
DANGER FOR CHILDREN AND PEOPLE WITH DISABILITIES

Packing materials are not toys. Children must not play with the packaging materials. There is a suffocation risk.
This product may be used by children 8 years and up as well as persons with physical, sensory or mental impairments or lacking experience and knowledge, when supervised or instructed in the safe use of the product and understanding the associated risks.
Children must not play with the device.
Cleaning and maintenance must not be performed by children without supervision.
Keep the device out of the reach of children.

DANGER! RISK OF FATALITY FROM ELECTRIC SHOCK

This device is intended only for use in dry, indoor environments.
Always check the USB cable and power adapter for damage before connecting the lamp to the power supply.
This device is maintenance-free. Its LEDs are not replaceable.
If the light source has reached the end of its life, the entire light needs to be replaced.
In the event of damage, repairs or other problems with the device, please contact Prozis customer service.
Make sure the light does not come into contact with water or other liquids under any circumstances.

CAUTION! THIS SYMBOL HIGHLIGHTS DANGEROUS SITUATIONS WHICH MAY LEAD TO MINOR TO MODERATE INJURIES, DAMAGE, MALFUNCTION, AND/OR DESTRUCTION OF THE DEVICE.
To prevent harm or damage from happening to users or others, make sure to comply with the following requirements.

Disconnect the lamp from the mains before assembling, dismantling or cleaning it.
Position the lamp in such a way that it is protected from moisture and dirt.
Do not cover the lamp with objects. Excessive heat can result in fire.
Do not look into the light source from up close while it is switched on.

PACKAGE CONTENTS

1 × Prozis Geod Flip Lamp
1 × USB charging cable
1 × Quick Guide

CLEANING AND MAINTENANCE

Switch off the product and remove all plugs before cleaning!
Protect the device from water drops and water spray.
Use only a clean, dry cloth for cleaning. Never use any solvents such as petrol and the like, as these may damage the product.
Use a slightly damp cloth and a mild cleaning agent to remove stubborn dirt.
Make sure moisture does not enter the product while cleaning to prevent damage to the product and related repairs.

STORAGE

Allow the product to cool down completely before storing it.
When no longer using the product, store it in a dry environment, away from dust and direct sunlight.
If the device is not going to be used for a long period of time, you should recharge it on a regular basis. This helps maintain battery performance.
Storing your product in the original packaging is recommended.

INSTRUCTIONS

Product description: see page 2

Power switch
Micro USB port
Charge indicator
USB charging cable

How to charge

Connect the Micro USB plug on the charging cable to the Micro USB port on the device. Plug the other end of the charging cable into a USB charger or a free USB port on a computer.
While charging, the charge indicator LED lights up in red. The light will go off when the lamp is fully charged.

Switching the lamp on and off

Switch the lamp on or off by using the power switch on the back of the equipment. Switching between light modes
Simply flip the lamp onto one of its three sides to alternate between table lamp, ambient lighting, and night light mode.
Placing the lamp with the luminescent surface facing down will turn it off.

Warranty statement

All electrical and electronic products commercialized by Prozis via www.prozis.com are covered by the warranty applicable to the purchase and sale of consumer goods.

GENERAL CONSIDERATIONS

This document contains the terms and conditions of Prozis’ warranty for final consumers.
This warranty is valid exclusively for consumers who purchase the product for non-professional purposes.

WARRANTY PERIOD

Prozis guarantees the product is to remain free from material and production defects for a 2-year period, counting from the date of initial purchase by a consumer and respective delivery, or for longer if legally established by the applicable national law.
In the event that repair is required, this 2-year period is suspended during repair time.
CONSUMABLES
The gradual performance decrease caused by prolonged use of the product’s consumable components, such as batteries, is not covered by this warranty unless the malfunction is caused by faulty design, materials, or production.

HOW TO MAKE A CLAIM

If the need arises to exercise the rights conceded to you through this warranty, please contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions or recommendations. Contact and technical assistance information is also provided at the end of this warranty.
Any claims made regarding this warranty will only be valid if proof of purchase is presented by the original customer. This proof of purchase may be the original invoice or receipt, as long as it includes information regarding the date of purchase and the product’s model name.

WARRANTY REPAIRS

Any repairs made under this warranty cannot be made by third parties. This warranty does not apply to any repairs, or damage caused directly by such repairs, that have impacted or caused the damage that is the subject of the respective warranty claim.

EXCLUSIONS

The following situations are not covered by this warranty:

Any wear and tear of parts and components resulting from normal product use.
Cracks, dents, scratches, and other types of surface damage only affect the prod- its appearance.
Any malfunction caused by inappropriate use of the product that does not comply with user manual instructions.
Use and storage of the product not complying with user manual instructions.
Opening of the product by a third party who is not authorized to proceed to its repair.
Altering or changing parts or components, whether internal or external.
Damage caused by battery leakage resulting from the breaking of any of its components, or from product misuse.
Malfunction or damage due to reasons that cannot be ascribed to the production or design of the product.
Use of the product in the context of a business, occupation, or commerce.
Malfunction due to use that does not comply with the technical or security norms in force, or with user manual instructions.

The services provided by Prozis in order to repair or fix any fault or malfunction resulting from the verification of any of the aforementioned excluded situations will be subject to payment of labor, transport, and component costs.
The customer shall bear all risks of loss and damage to the product during transportation to Prozis. This warranty will be void if the returned product arrives with labels or stickers that have been removed, damaged, tampered with, or modified in any way.

LIMITED RESPONSIBILITY

Prozis cannot be held responsible for indirect damage or loss due to usage of the product.

WHAT TO DO?

To request warranty service, you must first contact Prozis customer service via the communication channels provided on the Prozis website, and follow the provided instructions and recommendations.
Send back the product inside its original packaging, including all accessories and documentation, to the following address:

PROZIS
Rua do Cais nº 198 4830-345
Póvoa de Lanhoso
Braga – Portugal

CONTACTS
Prozis is always available for additional clarification through their customer service communication channel at www.prozis.com/support

Zona Franca Industrial
Plat 28 – Pavilhão K – Mod
6 9200-047
Caniçal, Madeira