Thone NC2 Noise Canceling Wireless Bluetooth Earbuds User Manual
- June 5, 2024
- Thone
Table of Contents
Thone NC2 Noise Canceling Wireless Bluetooth Earbuds
Instructions
Pairing & Connection
Pairing mode
Take out both earphones from the charging box (the earphone which comes out
first from the charging box will be the master device). They wil turn on and
linked together automatically. The master device goes into pairing mode and
blinks in red and blue colors.
Connect with your device
Open the Bluetooth menu of your device and search for the earphones with the
pairing name I hone NC2. Click the pairing name “Thone NC2” to connect with
your device. It will contain the connection with the voice prompts “connected.
The LEDs on both earphones stop blinking.
Connection finished
When finished, you can put the earphones back in the box, they will then turn
off automatically.
Reconnection
When yOu take out one or two earphones from the charging box and the Bluetooth
of your device is turned on, it or they will reconnect automatically to the
device it used the last time.
Charging
As soon as you put the earbuds into the charging case, they tum off
automatically and start charging. Please use the provided charging cable to
recharge. Ihe case shows the battery lite with four LEDs.
Each stands for 25% of battery lfe. To check the battery status you can open
the case or push the button at the bottom.
Control
YOu can control all basic functionality with touch Control on the left en right earbud. Check the images for each function.
Problems?
The sound quality is not optimal Wearing the size of the nght tip for your ears iS very important. By doing so you achieve the best sound quality and noise-canceling performance.
Clear pairing records
Put back both earbuds into the charging case, open the cover and hold the
button of the charging case 10 seconds until the four charging case LED’s
blink 10 times at a same time. You cleared the pairing records Successfully.
Now open the cover and hold the button of the charging case 2 seconds. The
left and right earbud LED’s blink in red and blue alternately to pair both
earbuds. Then reconnects with your Bluetooth device.
If Your earbuds don’t pair with each other
Put back both earbuds to the charging case, open the COver and hold the button
of the charging case for 2 seconds until both indicators blink in red and blue
alternately, then the main device indicator blinks in red and blue
alternately, then follow the “pairing and Connection” steps again. Contact In
case of complaints,
contact us at: [email protected]
Safety and handling
Hearing loss
Listening to sound at high volumes may permanently damage your hearing.
Background noise, as well as continued exposure to high volume levels, can
make sounds seem quieter than they actually are.
Check the volume after inserting the earphones in your ear and before playing
audio.
WARNING: To prevent possible hearing damage, do not listen at high volume
levels for long periods.
Driving hazard
Usage while operating a vehicle is not recommended and Is legal in some areas.
Check and obey the applIcable lawS and regulations opn the use of earphones
while operating a vehicle. Be careful and attentive while driving. Stop
listening to your audio device if you find it disruptive or distracting while
operating any type of vehicle or performing any activity that requires your
Tull attention.
Choking hazard
The earphones, the case, and small parts included within the packaging may
present a choking hazard or cause another injury to small children. Keep them
away from small children.
Skin irritation
Earphones can lead to ear infections if not properly Cleaned. Clean the
earphones regularly with a soft lint-free cloth. Don’t get moisture in any
openings, or
Use aerosol sprays, solvents, or abrasives. If a skin problem develops,
discontinue use. If the problem persists, consult a physician.
Prolonged heat exposure
Avoid prolonged skin contact with a device, its power adapter, the charging
cable and connector, or a wireless charger when plugged into a power SOurce,
because it may cause discomfort or injury. For example, while the case is
charging using the charging cable and a power adapter plugged into a power
SOurce, don’t sit or sleep on the case, charging cable, connector or power
adapter, or place them under a blanket, pillow, or your body. lake special
care if you have a physical condition that affects your ability to detect heat
against your body.
Charging
Charge the case with the charging cable and a power adapter or computer. Ony
charge with an adapter that is compliant with applicable country regulations
and international and regional safety standards, including the International
Standard for Safety of Infomation technology Equipment (EC 60960-1). Other
adapters may not meet applicable safety standards, and charging with such
adapters COuld pose a risk of death or injury. Using damaged cables or
chargers, or charging when moisture is present, can cause fire, electric
shock, injury, or damage to the case or other property
Electrostatic shock
When using the earphones in areas where the air is very dry, t is easy to
build up static electricity, and possible for your ears to receive a small
electrostatic discharge from the earphones. lo minimize the risk of
electrostatic discharge, avoid using the earphones in extremely dry
environments, or touch a grounded unpainted metal object before inserting the
earphones.
Batteries
Don’t attempt to replace earphones or case batteries yourself, you may damage
the batteries, which COuld cause overheating and injury.
Medical device interference
The earphones and case contain components and radios that emit
electromagnetic fields. The earphones and case also contain magnets. These
electromagnetic fields and magnets may interfere with pacemakers,
defibrillators, or other medical devices. Maintain a safe distance of
separation between your medical device and the earphones and case. Consult
your physician and medical device manufacturer for information specific to
your medical device. Stop using the earphones and case if yOu suspect they are
interfering with your pacemaker, defibrillator, or any other medical device.
Handle with care
Handle the earphones and case with care. They Contain sensitive electronic
components, including batteries, and can be damaged, impair functionality, or
cause injury if dropped, burned, punctured, crushed, disassembled, or if
exposed to excessive heat or liquid or to environments having high
concentrations of industrial chemicals, including near evaporating liquified
gasses such as helium. Don’t use damaged products.
Thone
Abel Veldhoven B.V.
Het Groen 1B
5511 AC Knegsel
The Netherlands
www.Thone.pro
[email protected]