Amazon AAD-4LA1 Electronic Mini Fridge Instruction Manual

Amazon AAD-4LA1 Electronic Mini Fridge

Precautions For Safe Use

Safety Precautions

• This appliance can be used by children over eight and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided they have been supervised or instructed in the judicious use of this appliance and understand the hazards involved.
• Children must not play with the appliance. Cleaning and maintenance should not be performed by children without supervision. Allow children aged 3 to 8 to access food.
• Children should be supervised to ensure that they do not play and climb on the fridge, and do not allow anyone to climb, sit, stand or lean on the door (lid) of the machine to prevent personal injury and damage to the fridge.
• Avoid pinching, folding, knotting or damaging the power cord. If the power cord is damaged, it must be replaced with a specific flexible cord or a special component purchased from its manufacturer or service department.
• When pulling out the power plug, do not pull the power cord directly to prevent it from breaking.
• The power plug must be pulled out when servicing or cleaning the fridge.
• The refrigerator is mainly used for food storage, not suitable for items with strict temperature requirements (such as vaccines, strains and chemical reagents, etc.).
• Explosives, such as combustion-supporting sprays, must not be stored in the appliance. When disposing of the unused refrigerator, the door (lid) of the refrigerator should be removed to prevent children from being locked in.
• Danger: Do not store or use flammable items such as gas, paint, gasoline, etc. near the ice machine and prohibit placing flammable or explosive items such as alcohol, gasoline, etc. in the ice machine to prevent explosions and fires.
• Danger: Do not place the refrigerator in damp and splashy locations.
• Warning: This product is only suitable for storing food, cannot be used for other purposes, such as storing blood and its products, medicines, biological products, chemicals and technical data.
• Warning: Do not use appliances in the pantry of the refrigerator other than the type recommended by the manufacturer.
• Warning: It is not advisable to place and use electrical devices such as microwave ovens, electric pans, voltage stabilizers, etc. on the top of the refrigerator, nor to place heavy objects and containers with liquids on the top of the refrigerator, in order to prevent them from falling and causing injury or liquid spillage that may lead to electric shock and fires.
• Warning: When flammable gas leaks, the valve of the leak source should be closed first and try to exhaust the indoor air. Do not unplug the appliance or operate the refrigerator to prevent fire.
• Warning: Keep the appliance enclosure or vents in the built-in structure clear of obstructions.

Electrical Connection

Generally, two kinds of power sources, AC and DC can be used to supply power to the electronic refrigerator (some specifications may be different, please refer to the product rating label for detailed power specifications).

Attachment: AC and DC power cord

• AC power
  • 110-120V AC for Home Use
• DC power
  • 12V DC for Car Use

Use Suggestions

Handling and Placement

• Handling
  • Do not hold the door (lid) to carry the refrigerator, it should be lifted from the designed lifting position or bottom of the product.
• Placement
  • The fridge must be used on a stable, level surface or it can be dangerous to the user.
  • The fridge should be placed in a dry, ventilated place with free-flowing air. In order to avoid overheating, affect the use effect of the fridge and prevent the occurrence of hazards, a space of more than 20cm should be reserved around the ventilation grille, and a space of more than 30cm should be reserved at the top.
  • The ventilation grills of the fridge are not allowed to be covered or blocked, and must be kept away from curtains and other flammable materials. Avoid close to heat sources or direct sunlight.
  • Warning: When placing the device, make sure that the power cord is not pinched or damaged. Do not place multiple portable sockets or portable power sources on the rear of the device.

Preparation Before Use

• Remove all packaging components, including foam pads at the bottom, foam pads and tape (if any) for internal securing accessories.
• Inventory random attachments and information.
• Place the refrigerator in the proper location by referring to the relevant contents in Handling and Placement.
• Follow the cleaning tips to clean the inside and outside of the machine.

Product Introduction

Product Feature

• Dual purpose – cooling and heating
  • Apply Peltier semiconductor refrigeration technology, can be used for both cooling and heating, one machine for two purposes.
• Environmental friendly and energy-saving
  • The fridge must be used on a stable, level surface or it can be dangerous to the user.
  • Apply semiconductor refrigeration technology, no hydrocarbons, using thickened PU foam layer, which is more environmental friendly and energy-saving.
• Wide range of use
  • This appliance is intended for household and similar purposes, such as:

Kitchen areas in shops, offices or other workplaces.

Customers on farms, in hotels, motels, and residential-type environments.
Family hotel environment.
Food-service and similar non-retail applications.
Suitable for camping, touring vehicles and recreational boats.

List of Main Parts

All illustrations in this manual are schematic diagrams! Some features and devices may not exactly match your model of fridge! Please refer to the product for specific structure and configuration!

1. Handle (lift part)
2. Shell
3. Storage room
4. Door (lid)
5. Storage room door sealing strip
6. Ventilation grill （air-out）
7. Operation panel（power outlet）
8. Ventilation grill（air-in)
9. AC cord
10. DC cord

Start To Use

Operation Guide

1. Make sure that the 2 buttons on the back of the mini fridge are in the OFF position, and then turn on the power.
2. Cooling: Set the power switch to the COLD position, and at the same time insert the AC or DC plug according to the usage needs, the green indicator light will light up.
3. Heating: Set the power switch to the HOT position, and at the same time insert the AC or DC plug according to the usage needs, the red indicator light will light up.

Kindly Reminder

• Electronic refrigerators are not designed to cool hot food quickly or heat cold food quickly, but to ensure that cold food or hot food can continue to maintain the original temperature when transferred. It may take a long time to cool hot food or reheat cold food.
• Electronic refrigerators generally describe refrigeration performance as temperature difference.
• For example, if the cooling temperature difference is 15°C (when the ambient temperature is 25°C), it means that the refrigerator can be cooled to a minimum of 10°C when the ambient temperature is 25°C.

Test Time: 3-5 hours

Ambient Temperature(°C/°F)| 10°C/

50°F

| 15°C/

59°F

| 20°C/

68°F

| 25°C/

77°F

| 30°C/

86°F

| 35°C/

95°F

---|---|---|---|---|---|---
Fridge Internal Temperature(°C)| 0-2| 3-6| 7-10| 12-14| 17-19| N/A
Fridge Internal Temperature(°F)| 32-35.6| 37.4-42.8| 44.6-50| 53.6-57.2| 62.6-66.2| N/A

• If the product needs to be switched between cooling and heating functions during work, the function switch should be turned to the “OFF” position, and then switched after 30 minutes, otherwise the service life of the product will be shortened.
• This product is suitable for storing packaged foods and beverages such as fruits, vegetables, soft drinks, etc. when refrigerated. Fresh food should not be stored for a long time. Do not put carbonated beverages in while heating to avoid bursting.

Note:

• To avoid contamination of food, please follow the following instructions:Opening the door (lid) for a long time can cause a significant increase in the temperature of the fridge storage room.
• Regularly clean surfaces that may come in contact with food and accessible drainage systems.
• If the fridge is empty for a long period of time, please power off, defrost, clean and dry the inside of the refrigerator, keep the door (lid) open to prevent mold from forming inside.

Cleaning and Maintains

Attentions for Refrigerator Interior and Exterior Cleaning

• The power plug must be pulled out before cleaning.
• When cleaning, make sure that water does not get into the live parts.
• Use a soft towel dampened with warm water or mild detergent to scrub the interior and exterior of the refrigerator, except for the door seal.
• Must use clear water to clean door seal and wipe it off with a dry cloth.
• Do not scrub with cleaners that contain abrasives (such as toothpaste), acids, chemical solvents (such as alcohol), or polishes.
• Do not flush with water.

Energy-saving Points

• Place the refrigerator in a dry and well-ventilated place, ensure the refrigerator is not near heat sources and is not exposed to direct sunlight.
• High temperature items should be cooled to room temperature before putting into the refrigerator.
• Minimize the door (lid) opening time of the refrigerator.

Other Attentions

• During power outage
  • Reduce times of opening door (lid) of the refrigerator, avoid putting in new items (to prevent internal temperature from rising faster).
  • If you know you’re going to have a power outage, set your refrigerator to a lower temperature ahead of time.
• Turn off and stop using
  • If you need to shut down, you can directly pull out the power plug.
  • If you decide to leave the fridge out of service for a period of time, follow these steps: first turn off, then clean, and finally the door (lid) should be slightly opened to avoid bad smells.
  • Notice: If you decide to deactivate the machine, do not store anything in the storage room.

TroubleShooting

Analysis and Exclusion of Non-fault Phenomena

is high, this phenomenon will occur, just wipe it dry.
Frost and condensation in the storage room| As the refrigerator of the storage room is close to the inner wall, temperature here is low in the process of working, the phenomenon of frost and condensation may occur.
Poor cooling effect| In summer, due to the high ambient temperature, it is normal that the temperature in the storage room is higher.

Special Phenomena

Analysis and Exclusion of Special Phenomena

2. Check whether there is a power failure;

3. Check whether it is powered on;

4. Check whether the fuse at the cigarette lighter is damaged.

Power outage
Not power on
The fan works, but the indicator light does not light up| Indicator light is broken| Professionals are required to replace the indicator light.
The indicator light is on, the fan does not work| The fan is broken| 1. Professionals are needed to check whether the fan leads are falling off or replace the fan;

2. Check whether there is foreign matter

stuck on the fan blades.

Fan lead falls off
Foreign matter stuck on the fan blade
The color of the indicator light does not match function switch| Incorrect polarity of DC power supply| Check whether the polarity of the DC power supply is consistent with the power supply requirements of the product.
The indicator light indicates correctly, fan is working but no cooling (heating)| The cooling chip is broken| Professionals are needed to check whether the lead of the cooling chip fall off or replace cooling chip.
Lead wire of the cooling chip falls off
The indicator light is correct, fan is working but cooling (heating) effect is poor| The temperature in the refrigerator is affected by the environment| 1. The theoretical minimum temperature of the refrigerator can be 15°C below the ambient temperature, which will be different from the different application environments. For example, if your ambient temperature is 25°C, the minimum temperature of the refrigerator can reach 10°C;

2. Remove the items near the ventilation grille and clean up the dust;

3. Too many items need longer cooling time;

4. Check whether the door (lid) is closed properly.

The ventilation grill is blocked
There are too many items in the fridge
The door (lid) is not closed properly
A lot of condensed water inside the fridge| The hot air brought in by frequently turning on and off the refrigerator has a high water content, and it condenses into water after cooling.| Just wipe the water dry or put a towel on the bottom to absorb the moistur(It is recom- mended to wipe once a week).

Disposal

• To protect the environment, waste electrical products should not be disposed of together with household garbage.
• lf you no longer use this product and need to dispose of it, pleaseplace it in a special place for recycling and storage.
• lf you don’tunderstand，please consult your local government or retailer forrecycling recommendations.
• Model: AAD-4LA1
• Before operating the appliance, please read this manual and all the safety instructions thoroughly and retain it for future reference.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>