dahua NVR5000-1 Series CCTV TV Audio and Networking Distributor Cork User Guide
- June 4, 2024
- Dahua
Table of Contents
NVR5000-1 Series CCTV TV Audio and Networking Distributor Cork
User Guide
NVR5000-1 Series CCTV TV Audio and Networking Distributor Cork
How to trigger an e-mail when an event has occurred
TiOC HOW TO GUIDE
For an NVR-system
The following guide enables you to trigger an e-mail when an event has
occurred on (Series 3) and (Series 5 & 7) NVR systems.
Series
NVR5000-1 Series| Example
NVR5216-16P-1
---|---
NB: The firmware version is based on the latest version when this
document was created and may slightly differ from future versions, however,
this will not affect any of the functionality.
TiOC HOW TO GUIDE | How to trigger an e-mail when an event has occurred
Step 1: Setting up email notifications
Go to “NETWORK” > ”Email” and click Enable to activate the function.
Then, finish the detailed settings based on your email service, and click Test
until it shows that it has successfully connected.
Click Apply to save your settings.
Figure 1:
Start from the setup page of the NVR
Figure 2: Email settings
TiOC HOW TO GUIDE | How to trigger an e-mail when an event has occurred
Note: Details for email settings.
Firstly, you need to prepare two email addresses – one for sending alarms and
one for receiving alarms.
Secondly, you need to search and find the name and port of the email address
for sending email.
Examples
send@dahua.com|
receive@dahua.com
Gmail SMTP server:| smtp.gmail.com
Gmail Port:| Port for SSL: 465
Port for TLS: 587
Details and Reference: https://support.google.com/mail/answer/7126229?hl =en-GB Here is a summary:
| Settings Descr | Description | Example |
|---|---|---|
| SMTP Server | SMTP server address (Sender) |
smtp.gmail.com
Port| The port number of the SMTP server (Sender)| 465
Username| The account of the SMTP server (Sender)|
send@gmail.com
Password| The password of the SMTP server (Sender)| send password
Sender| The server email address
(Sender and normally same as Username)| send@gmail.com
Authentication| Method of authentication: SSL or TLS| SSL
Title| The subject of the email| IPC Message
Mail Receiver| The email address you want to receive information|
receive@dahua.com
TiOC HOW TO GUIDE | How to trigger an e-mail when an event has occurred
Step 2: If you need the alarm email to have an attachment with a Snapshot, you
need to activate the attachment function from the last page and adjust the
settings as follows.
Go to “STORAGE” > “SCHEDULE”, ensure the tab is set to Snapshot, check the
channel is the one you want to set, and click Settings. 
On this page, you can choose what kind of record can be stored. Choose the day
of the event you want to record motion detection.
Click OK to save your settings. 
Step 3: Check the email.
If an alarm has been activated you will receive an email with the event snapshot attached when it started and when it ended. The following logs are an example.
| Alarm Event: Tripwire | Alarm Event: Tripwire Clear |
|---|---|
| Alarm Input Channel: 9 | Alarm Input Channel: 9 |
| Alarm Input Channel Name: IPC | Alarm Input Channel Name: IPC |
Alarm Start Time (D/M/Y H:M:S):
17/12/2020 15:08:26| Alarm StopTime (D/M/Y H:M:S):
17/12/2020 15:08:29
Alarm Device Name: NVR| Alarm Device Name: NVR
Alarm Name: FullScreen| Alarm Name: FullScreen
IP Address: 192.168.5.59| IP Address: 192.168.5.59
Effective Target: Person|
Figure 5: One example of the email
*Design and specifications are subject to change without notice.
DAHUA UK & IRELAND
Quantum, 60 Norden Road, Maidenhead, Berkshire SL6 4AY
Tel: +44 (0) 1628 613 500
sales.UK@dahuatech.com
support.UK@dahuatech.com
If you still encounter problems operating your Dahua device, please call +44
(0)1628 613 500
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>