DOGCARE EC11 Dog Training System Instruction Manual

DOGCARE EC11 Dog Training System

Dog Training System

Charge the colar and remote control with the included USB cable. Charging takes approximately 2 hours respectively.

Collar fitting: when wearing the collar, the tightness is at most fit if one finger can be inserted underneath. Make sure the CONTACT POINTS on the colar are placed snugly against your dog’s skin.

Turn on the collar: hold the ON/OFF BUTTON for 2 seconds. Turn on the remote control: rotate the ONIOFF SwITCH dockwise.

UnlockLock the remote control keypad: toggle the KEYPAD LOCK down to unlock, and up to lock.

Beep command: press the BEEP BUTTON briely, and the collar will beep once.

Static intensity adjustmet: press and hold the LEVEL BUTTON while rotating the ONIOFF SWICTH to adjust the static intensity. Static command: press the STATIC BUTTON Driefly, and the collar will apply a static stimulation,

Channel switching: it is possitle to train 3 dogs at the same time. Toggle the CHANNEL SWITCH to select which dog to train.

Pairing: refer to page #10 for more information.

COLLAR STATIC STIMULATION QUICK GUIDE

When wearing the colar, t is most sutable f one finger can be inserted under it. Too sight is not good for your dog, but too kcse wll dul the stac functicn for the CONTACT POINTS cannct touch your dog’s skin.

• Your dog has thick 1ur. ploase separate the fur apart so that both cONTACT POINTS can 5ouch the skin
• Make sure protective siicone caps are off the cONTACT POINTS They can dull the stasc sensation sent to your dog.
• Waner can help conduct eectrioty.It you spray some waber around the cONTACT POINTS, the stasic function can work more effectivoly
• One ast thing you can try s to shear the fur where both CONTACT POINTS a ouched.
• Only when both CONTACT POINTS are simultaneously touched, the static will work.
• Ir the collar has a delayed reaction or fails to sync up even in a short distance, make sure there is no strong signal interferenoe in your sumoundings. The remote’s range coud be affected by obstacles, electromagnetic field, or even stormy Weather
• If you find the collar not working, please check whether you have pushed up the KEYPAD LOCK which is on the left side of the remote. 4. The sensitivity to static depends on your dog’s size, weight, amount of fur, and even skin condition.

In the Box

Remote Control & Collar

Display

• Setting up
• Charge the devices for at least 2 hours repectively.
• Remote control: charge the device untl the REMOTE CONTROL
• BATTERY on the DISPLAY indicates full bars.
  Colar: charge the device untl the red STATUS LED tums green. When the red light flashes, it indicates low battery.

Make sure that the collar is powered off. Have your dog stand in a baanced position an a flat, even Surface. Put the strap over your dog’s neck. centering the collar underneath its neck and making sure that the DogCare logo is upright facing you. Tighten the strap so that it fits snugly on your dog’s neck and shoud not be able to rotate around the neck. The tightness is at most fit if one finger can be inserted underneath. NOTE: e oallar shoukd t tiody and shoukd not be ab to rotate or lide on your dog’s neck Your dog must be able to swalow food and water normally You should obeerve your dog’s behavior to verify that the colar is nat too tight. Wiggke the colar to work the CONTACT POINTS through thee dog’s coat NOTE:The CONTACT POINTS must have contact ith the dog’s skin to be efective. If your dog has thick fur, please separate the fur at the CONTACT POINTS with a comb to enable them to reach the skin.

Pairing

The set of remote control and colar has been paired with channel #1 by factory setting. To pair extra collar, please follow the instructions below: 1. Toggle the CHANNEL SWITCH and select channel #2 or #3. The CHANNEL DISPLAY will show the sekcted channel number for the new collar.

Troubleshooting

• No display when remote is turned on; unable to turn off remote The operation function is abnormal. Press the PAIRING BUTTON and the LEVEL BUTTON at the same time to restart the remote control.
• Remotelcolar runs out of power quickly Make sure the charger and the remote/collar are securely connected. Charge the device for 2 hours or above.
• Remote does not respond .Recharge the remote. Check the KEYPAD LOCK, and unlock the remote. Pair the remote and collar again.
• Colar does not respond Make sure the collar has been paired. Check the remote, making sure the collar is on the corresponding channel. Check the remote, making sure both the remote and collar have suficient pawer.
• Training system has no effect on my dog Make sure the collar has been tumed on, and the CONTACT POINTS are placed snugly against your dog’s skin. Try increasing the static level.
•  Training mode fails to sync up even in a very short distance Make sure there is no strong signal interference in your surroundings. The remote’s range could fuctuate subjects to obstacles, eectromagnetic fiekt, ar even stormy weather. 7.Colar beeps, vibrates or applies static stimuation by itset occasionaly or constanly Make sure no button of the remate has been pressed or gotten stuck. Pair the collar with the remote once again.

Training Tips

• The device is used for training dogs only: please do not use it for any other purposes
• Do not use the device on dogs aged below 6-month, old, pregnant, easly frightened, aggressive, in heat, or in inferior health conditions.
• Use verbal commands first, and supplement with corrective stimukus only as needed. Be consistent with your verbal commands; use the same word every time. Work with your pet on one behavior at a time to avoid confusion and frustration. Reward your dog with food treats will usualy help to achieve the best result.
• Use as litte stirmulus as possitle and only to reinforce verbal commands when necessary. Do not overcorrect your dog
• For example, use the beep sound as warning by pressing the BEEP BUTTON. The dog will become conditioned to the beep precedingg the corective stimulus and will soon learn to recognize the beep as a waming along with your verbal command.
•  Do nat rely on this product solely to train your dog. Some dogs wil not respond to this product. We cannot guarantee the effectiveness of this or any trainer on your dog If your dog shows signs of grawling, snarling, biting, or aggression while using the colar, discontinue use immediately and contact a professional trainer for advice.

Safety Guidelines

• It is stricdy prohibited to disassemble the collar in any situation. Doing so will ikely compromise the waterproof function and thus voiding the product warranty
• To guarantee the normal diving function, please insert the waterproof rubber charging lid in place.
• Please use the remote control and the colar from the complete set. Do not use other product to match with the collar.
• If you want to test the product, please use professional testing apparatus. Do not test with hands, so as to avoid accidental injury.
• If find water at the charging port. please wipe it dry before charging
• The collar is not a regular traction collar and not recommended to attach a leash to walk your dog. Doing so during pulling may hurt the dog due to proruding CONTACT POINTS on the collar.
• Do not put the collar on for over 12 hours, as it may cause rashes or discomfort to your dog’s skin.

Terms of Use and Limitation of Liability

•  Use of this product means you accept all the terms and conditions.
• This product is a professional dog training device. You are not recommended to use this product if your dog is clever and less than 8 pounds in weight. If you’re not sure whether the product is suitable for your pet dog. please consuk the professional handler or contact us.
• This product is a professional dog training device and cannot be used for other purposes. Please do not violate local laws in using this product.
• We are not responsible for any direct or indirect damages caused by use or misuse af this product; all risks in using this product are the responsibi ty of the user.
• Please contact the dealer for parts warranty. goods retum or exchange. We provide technical support anly.
• We reserve the right to change the terms, conditions and notioes of this product are offered.

FCC Statement

• This device complies with Part 15 of the FCC Rules. Operation is subject to the folowing two conditions:
• This device may not cause harmful interference, and
• This device must acoept any interference received, induding interference that may cause undesired operation
• Changes or modifications not expressly approved by the party responsible for complance could void the user’s authority to operate the equipment.
• This equipment has been tested and found to comply with the Imits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause8 harmful interference to radio communications. However, there is no guarantee that nterterence will not oocur in a particular installabon. If this equipment does cause harmful interfer-ence to radio or television reception, which can be deter mined by turning the equipment off and on, the user is enoouraged to try to correct the interference by one or more of the following measures
• Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver.
• Connect the equipment into an outket on a cicuit different from that to which he receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Product Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>